main
Ray tps61085dgkr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 0a506e4
{
  "slug": "tps61085dgkr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps61085dgkr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps61085dgkr.kicad_sym",
    "tps61085dgkr.kicad_mod",
    "tps61085dgkr.glb",
    "tps61085dgkr.step",
    "tps61085dgkr.lbr",
    "docs/hero.png",
    "docs/tps61085dgkr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS61085DGKR",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-8-0.65mm",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps61085.pdf",
    "parts": {
      "symbol": "tps61085dgkr.kicad_sym",
      "footprint": "tps61085dgkr.kicad_mod",
      "model_3d": "tps61085dgkr-etched.glb",
      "model_3d_plain": "tps61085dgkr.glb",
      "model_3d_step": "tps61085dgkr-etched.step",
      "model_3d_step_plain": "tps61085dgkr.step",
      "lbr": "tps61085dgkr.lbr"
    },
    "distributor_links": {
      "lcsc": "C113659"
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP",
        "type": "bidirectional",
        "description": "Compensation pin for external feedback network used to optimize output voltage regulation."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Feedback voltage input pin; nominal regulation voltage is 1.238 V."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable input pin; connect to high level to enable device, connect to low level to disable."
      },
      {
        "number": "4",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground connection pin."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Switch output pin to drive external inductor; rated for -0.3 V to 20 V with 2.0 A minimum current limit."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Input power supply pin accepting 2.3 V to 6.0 V input voltage range."
      },
      {
        "number": "7",
        "name": "FREQ",
        "type": "input",
        "description": "Frequency selection input pin; connect to GND for 650 kHz operation or to VIN for 1.2 MHz operation."
      },
      {
        "number": "8",
        "name": "SS",
        "type": "output",
        "description": "Soft-start control pin; external capacitor connected to this pin is charged at 10 μA typical to control inrush current."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 5 (SW) is listed as input type (I) in the datasheet Pin Functions table on page 3, but functions"
        ],
        "pages_sent": 32,
        "cost_usd": 0.2991,
        "at": "2026-09-22T22:29:15"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps61085.pdf",
        "pages": 32,
        "sha256": "1bb954788393db7f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps61085dgkr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps61085dgkr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e04a155573b2ba4990650866b0ca9072c9aec9b140f5f97d3a979133d42e97ee",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}