component
TPS61085DGKR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS61085DGKR
Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm
TPS61085DGKR from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | bidirectional | Compensation pin for external feedback network used to optimize output voltage regulation. |
| 2 | FB | input | Feedback voltage input pin; nominal regulation voltage is 1.238 V. |
| 3 | EN | input | Enable input pin; connect to high level to enable device, connect to low level to disable. |
| 4 | PGND | power_in | Power ground connection pin. |
| 5 | SW | output | Switch output pin to drive external inductor; rated for -0.3 V to 20 V with 2.0 A minimum current limit. |
| 6 | IN | power_in | Input power supply pin accepting 2.3 V to 6.0 V input voltage range. |
| 7 | FREQ | input | Frequency selection input pin; connect to GND for 650 kHz operation or to VIN for 1.2 MHz operation. |
| 8 | SS | output | Soft-start control pin; external capacitor connected to this pin is charged at 10 μA typical to control inrush current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS61085DGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
tps61085dgkr-etched.step/tps61085dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61085dgkr.step/tps61085dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
1bb954788393db7f, retrieved 2026-09-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).