main
History Download
Ray tps61073ddcr: specified limits as data (metadata.characteristics, 30 rows from the datasheet) 5ff3a51

TPS61073DDCR

Texas Instruments · DC-DC Converters · SOT-23-6

TPS61073DDCR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch node driven by internal power switches; connected to boost inductor and rectifying switch for DC/DC conversion.
2 GND power_in Ground connection for logic and power circuits.
3 EN input Enable input; 0.4 V low threshold and 1.2 V high threshold for TPS61073; high enables DC/DC conversion, low disables with load disconnect.
4 FB input Voltage feedback input for output voltage programming; regulated at 500 mV nominal with external resistor divider.
5 VOUT output Regulated boost converter output voltage; adjustable from 2.3 V to 5.5 V for TPS61073 via external resistor divider.
6 VBAT power_in Supply voltage input; operating range 2.3 V to 5.5 V and minimum start-up threshold 2.3 V for TPS61073.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range on SW, VOUT, VBAT, EN, FB -0.3 7 V 2
Operating virtual junction temperature range TJ -40 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Supply voltage at VBAT, VI (TPS61073) VBAT, VI 2.3 5.5 V 2
Operating free air temperature range TA -40 85 °C 2
Operating virtual junction temperature range (recommended) TJ -40 125 °C 2
Input voltage range, after start-up (TPS61073) 2.3 5.5 V 3
Output voltage range (TPS61073) VO 2.3 5.5 V 3
Feedback voltage V(FB) 495 500 505 mV 3
Oscillator frequency (TPS61073) f 960 1200 1440 kHz 3
Switch current limit I(SW) 500 600 700 mA VOUT = 3.3 V 3
Quiescent current VBAT (TPS61073) 1 1.5 µA IO = 0 mA, V(EN) = 1.8 V, VBAT = 2.4 V, VOUT = 5 V, TA = 25°C 3
Quiescent current into VOUT (TPS61073) 30 50 µA IO = 0 mA, V(EN) = 1.8 V, VBAT = 2.4 V, VOUT = 5 V, TA = 25°C 3
Shutdown current (TPS61073) 0.05 1.5 µA V(EN) = 0 V, VBAT = 3.6 V, TA = 25°C 3
EN input low voltage (TPS61073) VIL 0.4 V 3
EN input high voltage (TPS61073) VIH 1.2 V 3
EN input current (TPS61073) 0.01 0.3 µA Clamped on GND or VBAT 3
Minimum input voltage for start-up (TPS61073) 2.3 V RL = 270 Ω 3
Boost switch-on resistance 480 mΩ VOUT = 3.3 V 3
Rectifying switch-on resistance 600 mΩ VOUT = 3.3 V 3
Total accuracy (including line and load regulation) 3 % 3
Line regulation 1 % 3
Load regulation 1 % 3
Undervoltage lockout threshold V(UVLO) 0.8 V V(BAT) voltage decreasing 3
Overtemperature protection 140 °C 3
Overtemperature hysteresis 20 °C 3
Thermal resistance junction-to-ambient (DDC) ΘJA 130 °C/W DDC package, JEDEC high K board 2
Thermal resistance junction-to-board (DDC) ΘJB 27 °C/W DDC package 2
Thermal resistance junction-to-case (DDC) ΘJC 41 °C/W DDC package 2
Power rating (DDC) 769 mW TA = 25°C 2

CAD (KiCad official)

  • Symbol: TPS61073DDCR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tps61073ddcr-etched.step / tps61073ddcr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61073ddcr.step / tps61073ddcr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 33794d2c04afca85, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF