3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS61073DDCR
Texas Instruments · DC-DC Converters · SOT-23-6
TPS61073DDCR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch node driven by internal power switches; connected to boost inductor and rectifying switch for DC/DC conversion. |
| 2 | GND | power_in | Ground connection for logic and power circuits. |
| 3 | EN | input | Enable input; 0.4 V low threshold and 1.2 V high threshold for TPS61073; high enables DC/DC conversion, low disables with load disconnect. |
| 4 | FB | input | Voltage feedback input for output voltage programming; regulated at 500 mV nominal with external resistor divider. |
| 5 | VOUT | output | Regulated boost converter output voltage; adjustable from 2.3 V to 5.5 V for TPS61073 via external resistor divider. |
| 6 | VBAT | power_in | Supply voltage input; operating range 2.3 V to 5.5 V and minimum start-up threshold 2.3 V for TPS61073. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range on SW, VOUT, VBAT, EN, FB | -0.3 | 7 | V | 2 | |||
| Operating virtual junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Supply voltage at VBAT, VI (TPS61073) | VBAT, VI | 2.3 | 5.5 | V | 2 | ||
| Operating free air temperature range | TA | -40 | 85 | °C | 2 | ||
| Operating virtual junction temperature range (recommended) | TJ | -40 | 125 | °C | 2 | ||
| Input voltage range, after start-up (TPS61073) | 2.3 | 5.5 | V | 3 | |||
| Output voltage range (TPS61073) | VO | 2.3 | 5.5 | V | 3 | ||
| Feedback voltage | V(FB) | 495 | 500 | 505 | mV | 3 | |
| Oscillator frequency (TPS61073) | f | 960 | 1200 | 1440 | kHz | 3 | |
| Switch current limit | I(SW) | 500 | 600 | 700 | mA | VOUT = 3.3 V | 3 |
| Quiescent current VBAT (TPS61073) | 1 | 1.5 | µA | IO = 0 mA, V(EN) = 1.8 V, VBAT = 2.4 V, VOUT = 5 V, TA = 25°C | 3 | ||
| Quiescent current into VOUT (TPS61073) | 30 | 50 | µA | IO = 0 mA, V(EN) = 1.8 V, VBAT = 2.4 V, VOUT = 5 V, TA = 25°C | 3 | ||
| Shutdown current (TPS61073) | 0.05 | 1.5 | µA | V(EN) = 0 V, VBAT = 3.6 V, TA = 25°C | 3 | ||
| EN input low voltage (TPS61073) | VIL | 0.4 | V | 3 | |||
| EN input high voltage (TPS61073) | VIH | 1.2 | V | 3 | |||
| EN input current (TPS61073) | 0.01 | 0.3 | µA | Clamped on GND or VBAT | 3 | ||
| Minimum input voltage for start-up (TPS61073) | 2.3 | V | RL = 270 Ω | 3 | |||
| Boost switch-on resistance | 480 | mΩ | VOUT = 3.3 V | 3 | |||
| Rectifying switch-on resistance | 600 | mΩ | VOUT = 3.3 V | 3 | |||
| Total accuracy (including line and load regulation) | 3 | % | 3 | ||||
| Line regulation | 1 | % | 3 | ||||
| Load regulation | 1 | % | 3 | ||||
| Undervoltage lockout threshold | V(UVLO) | 0.8 | V | V(BAT) voltage decreasing | 3 | ||
| Overtemperature protection | 140 | °C | 3 | ||||
| Overtemperature hysteresis | 20 | °C | 3 | ||||
| Thermal resistance junction-to-ambient (DDC) | ΘJA | 130 | °C/W | DDC package, JEDEC high K board | 2 | ||
| Thermal resistance junction-to-board (DDC) | ΘJB | 27 | °C/W | DDC package | 2 | ||
| Thermal resistance junction-to-case (DDC) | ΘJC | 41 | °C/W | DDC package | 2 | ||
| Power rating (DDC) | 769 | mW | TA = 25°C | 2 |
CAD (KiCad official)
- Symbol:
TPS61073DDCR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tps61073ddcr-etched.step/tps61073ddcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61073ddcr.step/tps61073ddcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
33794d2c04afca85, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).