component
TPS61030PWPR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# TPS61030PWPR++**Texas Instruments** · DC-DC Converters · TSSOP-16-EP++TPS61030PWPR from Texas Instruments, in a TSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | passive | Boost and rectifying switch input, connects to the external inductor and internal NMOS/PMOS switch pair. |+| 2 | SW | passive | Boost and rectifying switch input, connects to the external inductor and internal NMOS/PMOS switch pair. |+| 3 | PGND | power_in | Power ground; source of the internal NMOS switch, must be connected to system power ground and to the PowerPAD. |+| 4 | PGND | power_in | Power ground; source of the internal NMOS switch, must be connected to system power ground and to the PowerPAD. |+| 5 | PGND | power_in | Power ground; source of the internal NMOS switch, must be connected to system power ground and to the PowerPAD. |+| 6 | VBAT | power_in | Supply voltage input to the device, accepts 1.8 V to 5.5 V. |+| 7 | LBI | input | Low battery comparator input, enabled with EN, switching threshold 500 mV typical, do not let float. |+| 8 | SYNC | input | Enable/disable power save mode (logic high on VBAT disables power save, logic low on GND enables it) or accepts an external clock signal for synchronization. |+| 9 | EN | input | Enable input; logic high (VBAT) enables the converter, logic low (GND) disables it and puts the device in shutdown. |+| 10 | LBO | output | Low battery comparator open-drain output, active low when LBI voltage drops below the 500 mV threshold, high-impedance when device is disabled. |+| 11 | GND | power_in | Control/logic ground reference for all internal control functions; must be connected to PGND at a single point near the IC. |+| 12 | FB | input | Voltage feedback input for adjustable output voltage versions, regulated to an internal reference of 500 mV. |+| 13 | VOUT | power_out | DC/DC converter output, delivers the regulated boost output voltage and current. |+| 14 | VOUT | power_out | DC/DC converter output, delivers the regulated boost output voltage and current. |+| 15 | VOUT | power_out | DC/DC converter output, delivers the regulated boost output voltage and current. |+| 16 | NC | unconnected | No internal connection. |+| 17 | PowerPAD | power_in | Exposed thermal pad; must be soldered to the PCB and connected to PGND for proper power dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16-EP |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS61030PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `tps61030pwpr-etched.step` / `tps61030pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps61030pwpr.step` / `tps61030pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps61030) (33 pp, sha256 `09d8799e40eac542`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps61030pwpr-datasheet.pdf)
page.jsonadded+197@@ -0,0 +1,197 @@+{+ "slug": "tps61030pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, TSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps61030pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps61030pwpr.kicad_sym",+ "tps61030pwpr.kicad_mod",+ "tps61030pwpr.glb",+ "tps61030pwpr.step",+ "tps61030pwpr.lbr",+ "docs/hero.png",+ "docs/tps61030pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS61030PWPR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16-EP",+ "pin_count": 17,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps61030",+ "parts": {+ "symbol": "tps61030pwpr.kicad_sym",+ "footprint": "tps61030pwpr.kicad_mod",+ "model_3d": "tps61030pwpr-etched.glb",+ "model_3d_plain": "tps61030pwpr.glb",+ "model_3d_step": "tps61030pwpr-etched.step",+ "model_3d_step_plain": "tps61030pwpr.step",+ "lbr": "tps61030pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C9842"+ },+ "pins": [+ {+ "number": "1",+ "name": "SW",+ "type": "passive",+ "description": "Boost and rectifying switch input, connects to the external inductor and internal NMOS/PMOS switch pair."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "passive",+ "description": "Boost and rectifying switch input, connects to the external inductor and internal NMOS/PMOS switch pair."+ },+ {+ "number": "3",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground; source of the internal NMOS switch, must be connected to system power ground and to the PowerPAD."+ },+ {+ "number": "4",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground; source of the internal NMOS switch, must be connected to system power ground and to the PowerPAD."+ },+ {+ "number": "5",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground; source of the internal NMOS switch, must be connected to system power ground and to the PowerPAD."+ },+ {+ "number": "6",+ "name": "VBAT",+ "type": "power_in",+ "description": "Supply voltage input to the device, accepts 1.8 V to 5.5 V."+ },+ {+ "number": "7",+ "name": "LBI",+ "type": "input",+ "description": "Low battery comparator input, enabled with EN, switching threshold 500 mV typical, do not let float."+ },+ {+ "number": "8",+ "name": "SYNC",+ "type": "input",+ "description": "Enable/disable power save mode (logic high on VBAT disables power save, logic low on GND enables it) or accepts an external clock signal for synchronization."+ },+ {+ "number": "9",+ "name": "EN",+ "type": "input",+ "description": "Enable input; logic high (VBAT) enables the converter, logic low (GND) disables it and puts the device in shutdown."+ },+ {+ "number": "10",+ "name": "LBO",+ "type": "output",+ "description": "Low battery comparator open-drain output, active low when LBI voltage drops below the 500 mV threshold, high-impedance when device is disabled."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Control/logic ground reference for all internal control functions; must be connected to PGND at a single point near the IC."+ },+ {+ "number": "12",+ "name": "FB",+ "type": "input",+ "description": "Voltage feedback input for adjustable output voltage versions, regulated to an internal reference of 500 mV."+ },+ {+ "number": "13",+ "name": "VOUT",+ "type": "power_out",+ "description": "DC/DC converter output, delivers the regulated boost output voltage and current."+ },+ {+ "number": "14",+ "name": "VOUT",+ "type": "power_out",+ "description": "DC/DC converter output, delivers the regulated boost output voltage and current."+ },+ {+ "number": "15",+ "name": "VOUT",+ "type": "power_out",+ "description": "DC/DC converter output, delivers the regulated boost output voltage and current."+ },+ {+ "number": "16",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection."+ },+ {+ "number": "17",+ "name": "PowerPAD",+ "type": "power_in",+ "description": "Exposed thermal pad; must be soldered to the PCB and connected to PGND for proper power dissipation."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "1/17 pins cited to the wrong page (name found elsewhere): ['17:PGND@p30']"+ ],+ "pages_sent": 33,+ "cost_usd": 0.337,+ "at": "2026-09-22T19:07:46"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps61030",+ "pages": 33,+ "sha256": "09d8799e40eac542",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}