component
TPS61030PWPR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS61030PWPR
Texas Instruments · DC-DC Converters · TSSOP-16-EP
TPS61030PWPR from Texas Instruments, in a TSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Boost and rectifying switch input, connects to the external inductor and internal NMOS/PMOS switch pair. |
| 2 | SW | passive | Boost and rectifying switch input, connects to the external inductor and internal NMOS/PMOS switch pair. |
| 3 | PGND | power_in | Power ground; source of the internal NMOS switch, must be connected to system power ground and to the PowerPAD. |
| 4 | PGND | power_in | Power ground; source of the internal NMOS switch, must be connected to system power ground and to the PowerPAD. |
| 5 | PGND | power_in | Power ground; source of the internal NMOS switch, must be connected to system power ground and to the PowerPAD. |
| 6 | VBAT | power_in | Supply voltage input to the device, accepts 1.8 V to 5.5 V. |
| 7 | LBI | input | Low battery comparator input, enabled with EN, switching threshold 500 mV typical, do not let float. |
| 8 | SYNC | input | Enable/disable power save mode (logic high on VBAT disables power save, logic low on GND enables it) or accepts an external clock signal for synchronization. |
| 9 | EN | input | Enable input; logic high (VBAT) enables the converter, logic low (GND) disables it and puts the device in shutdown. |
| 10 | LBO | output | Low battery comparator open-drain output, active low when LBI voltage drops below the 500 mV threshold, high-impedance when device is disabled. |
| 11 | GND | power_in | Control/logic ground reference for all internal control functions; must be connected to PGND at a single point near the IC. |
| 12 | FB | input | Voltage feedback input for adjustable output voltage versions, regulated to an internal reference of 500 mV. |
| 13 | VOUT | power_out | DC/DC converter output, delivers the regulated boost output voltage and current. |
| 14 | VOUT | power_out | DC/DC converter output, delivers the regulated boost output voltage and current. |
| 15 | VOUT | power_out | DC/DC converter output, delivers the regulated boost output voltage and current. |
| 16 | NC | unconnected | No internal connection. |
| 17 | PowerPAD | power_in | Exposed thermal pad; must be soldered to the PCB and connected to PGND for proper power dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16-EP |
| Category | Power Management (PMIC) |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS61030PWPR - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: TSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
tps61030pwpr-etched.step/tps61030pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61030pwpr.step/tps61030pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
09d8799e40eac542, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).