main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps61023drlt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps61023drlt: viewers · Ray
package.json tps61023drlt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps61023drlt: specified limits as data (metadata.characteristics, 47 rows from the datasheet) · Ray
README.md tps61023drlt: specified limits as data (metadata.characteristics, 47 rows from the datasheet) · Ray
tps61023drlt-etched.fit.json tps61023drlt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61023drlt-etched.glb tps61023drlt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61023drlt-etched.step tps61023drlt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps61023drlt.glb Publish 0.1.0 · Ray
tps61023drlt.kicad_mod Publish 0.1.0 · Ray
tps61023drlt.kicad_sym Publish 0.1.0 · Ray
tps61023drlt.lbr Publish 0.1.0 · Ray
tps61023drlt.step Publish 0.1.0 · Ray

TPS61023DRLT

Texas Instruments · DC-DC Converters · SOT-563

TPS61023DRLT from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Voltage feedback input from external resistor divider for output voltage regulation in the 2.2V to 5.5V range.
2 EN input Enable logic input; voltage above 1.2V enables device operation, voltage below 0.45V disables device and forces shutdown mode.
3 VIN power_in IC power supply input with operating range of 0.5V to 5.5V; minimum 1.8V required for startup via UVLO circuit.
4 GND power_in Ground pin of the IC; serves as the reference node for all internal and external voltage measurements.
5 SW passive Switch node connected to the drain of internal low-side MOSFET and source of internal high-side MOSFET; externally connects inductor and must tolerate voltages from -0.3V to 7V with transient spikes to 9V.
6 VOUT power_out Boost converter output with regulation range of 2.2V to 5.5V; over-voltage protection threshold at 5.7V typical with 0.1V hysteresis.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-563
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Input voltage range VIN 0.5 5.5 V 5
VOUT Output voltage setting range VOUT 2.2 5.5 V 5
Under-voltage lockout threshold VIN_UVLO 1.7 1.8 V VIN rising 5
Under-voltage lockout threshold VIN_UVLO 0.4 0.5 V VIN falling 5
Reference voltage at the FB pin VREF 580 595 610 mV PWM mode 5
Reference voltage at the FB pin VREF 585 601 mV PFM mode 5
Output over-voltage protection threshold VOVP 5.5 5.7 6 V VOUT rising 5
EN logic low threshold VEN_L 0.35 0.42 0.45 V VIN > 1.8 V or VOUT > 2.2 V 5
Minimum on time tON_min 40 96 130 ns 5
Minimum off time tOFF_min 80 120 ns 5
Valley current limit ILIM_SW 2.7 3.7 A VIN = 3.6 V, VOUT = 5.0 V 5
Pre-charge current ILIM_CHG 200 350 mA VIN = 1.8 - 5.5 V, VOUT < 0.4 V 5
Pre-charge current ILIM_CHG 750 1200 mA VIN = 2.4 V, VOUT = 2.15 V 5
Quiescent current into VIN pin IQ 0.9 3 µA IC enabled, No load, No switching VIN = 1.8 V to 5.5 V, VFB = VREF + 0.1 V, TJ up to 85°C 5
Quiescent current into VOUT pin IQ 20 30 µA IC enabled, No load, No switching VOUT = 2.2 V to 5.5 V, VFB = VREF + 0.1 V, TJ up to 85°C 5
Shutdown current into VIN and SW pin ISD 0.1 0.2 µA IC disabled, VIN = VSW = 3.6 V, TJ = 25°C 5
Leakage current at FB pin IFB_LKG 4 20 nA TJ = 25°C 5
Leakage current into VOUT pin IVOUT_LKG 1 3 µA IC disabled, VIN = 0 V, VSW = 0 V, VOUT = 5.5 V, TJ = 25°C 5
Input voltage range (recommended) VIN 0.5 5.5 V 4
Output voltage setting range (recommended) VOUT 2.2 5.5 V 4
Effective inductance range L 0.37 1 2.9 µH 4
Effective input capacitance range CIN 1 4.7 µF 4
Effective output capacitance range COUT 4 10 1000 µF 4
Operating junction temperature TJ -40 125 °C 4
Voltage range at terminals (VIN, EN, FB, SW, VOUT) -0.3 7 V 4
SW spike -0.7 8 V 10 ns 4
SW spike -0.7 9 V 1 ns 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Output over-voltage protection hysteresis VOVP_HYS 0.1 V 5
Leakage current at FB pin IFB_LKG 6 nA TJ = 125°C 5
Soft startup time tSS 700 µs From active EN to VOUT regulation. VIN = 2.5 V, VOUT = 5.0 V, COUT_EFF = 10μF, IOUT = 0 5
High-side MOSFET on resistance RDS(on) 68 mΩ VOUT = 5.0 V 5
Low-side MOSFET on resistance RDS(on) 47 mΩ VOUT = 5.0 V 5
Switching frequency fSW 1 MHz VIN = 3.6 V, VOUT = 5.0 V, PWM mode 5
Switching frequency fSW 0.5 MHz VIN = 1.0 V, VOUT = 5.0 V, PWM mode 5
EN logic high threshold VEN_H 1.2 V VIN > 1.8 V or VOUT > 2.2 V 5
Thermal shutdown threshold TSD 150 °C TJ rising 5
Thermal shutdown hysteresis TSD_HYS 20 °C TJ falling below TSD 5
Junction-to-ambient thermal resistance (first data column, board not labelled) RθJA 142.7 °C/W DRL (SOT563) - 6 PINS 4
Junction-to-ambient thermal resistance (Standard EVM) RθJA 91.4 °C/W Standard EVM, 4-layer, 2oz copper, 50mm×38mm PCB 4
Junction-to-case thermal resistance RθJC 55.7 °C/W DRL (SOT563) - 6 PINS 4
Junction-to-board thermal resistance RθJB 31 °C/W DRL (SOT563) - 6 PINS 4
Junction-to-top characterization parameter (first data column, board not labelled) ΨJT 1.4 °C/W DRL (SOT563) - 6 PINS 4
Junction-to-top characterization parameter (Standard EVM) ΨJT 5.3 °C/W Standard EVM, 4-layer, 2oz copper, 50mm×38mm PCB 4
Junction-to-board characterization parameter (first data column, board not labelled) ΨJB 30.7 °C/W DRL (SOT563) - 6 PINS 4
Junction-to-board characterization parameter (Standard EVM) ΨJB 38.1 °C/W Standard EVM, 4-layer, 2oz copper, 50mm×38mm PCB 4

CAD (KiCad official)

  • Symbol: TPS61023DRLT
  • Footprint: Package_TO_SOT_SMD:SOT-563
  • 3D model: SOT-563 (KiCad packages3D, STEP)
  • 3D model files: tps61023drlt-etched.step / tps61023drlt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61023drlt.step / tps61023drlt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 3584f283b8c8ce7f, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF