3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS61023DRLT
Texas Instruments · DC-DC Converters · SOT-563
TPS61023DRLT from Texas Instruments, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Voltage feedback input from external resistor divider for output voltage regulation in the 2.2V to 5.5V range. |
| 2 | EN | input | Enable logic input; voltage above 1.2V enables device operation, voltage below 0.45V disables device and forces shutdown mode. |
| 3 | VIN | power_in | IC power supply input with operating range of 0.5V to 5.5V; minimum 1.8V required for startup via UVLO circuit. |
| 4 | GND | power_in | Ground pin of the IC; serves as the reference node for all internal and external voltage measurements. |
| 5 | SW | passive | Switch node connected to the drain of internal low-side MOSFET and source of internal high-side MOSFET; externally connects inductor and must tolerate voltages from -0.3V to 7V with transient spikes to 9V. |
| 6 | VOUT | power_out | Boost converter output with regulation range of 2.2V to 5.5V; over-voltage protection threshold at 5.7V typical with 0.1V hysteresis. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-563 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Input voltage range | VIN | 0.5 | 5.5 | V | 5 | ||
| VOUT Output voltage setting range | VOUT | 2.2 | 5.5 | V | 5 | ||
| Under-voltage lockout threshold | VIN_UVLO | 1.7 | 1.8 | V | VIN rising | 5 | |
| Under-voltage lockout threshold | VIN_UVLO | 0.4 | 0.5 | V | VIN falling | 5 | |
| Reference voltage at the FB pin | VREF | 580 | 595 | 610 | mV | PWM mode | 5 |
| Reference voltage at the FB pin | VREF | 585 | 601 | mV | PFM mode | 5 | |
| Output over-voltage protection threshold | VOVP | 5.5 | 5.7 | 6 | V | VOUT rising | 5 |
| EN logic low threshold | VEN_L | 0.35 | 0.42 | 0.45 | V | VIN > 1.8 V or VOUT > 2.2 V | 5 |
| Minimum on time | tON_min | 40 | 96 | 130 | ns | 5 | |
| Minimum off time | tOFF_min | 80 | 120 | ns | 5 | ||
| Valley current limit | ILIM_SW | 2.7 | 3.7 | A | VIN = 3.6 V, VOUT = 5.0 V | 5 | |
| Pre-charge current | ILIM_CHG | 200 | 350 | mA | VIN = 1.8 - 5.5 V, VOUT < 0.4 V | 5 | |
| Pre-charge current | ILIM_CHG | 750 | 1200 | mA | VIN = 2.4 V, VOUT = 2.15 V | 5 | |
| Quiescent current into VIN pin | IQ | 0.9 | 3 | µA | IC enabled, No load, No switching VIN = 1.8 V to 5.5 V, VFB = VREF + 0.1 V, TJ up to 85°C | 5 | |
| Quiescent current into VOUT pin | IQ | 20 | 30 | µA | IC enabled, No load, No switching VOUT = 2.2 V to 5.5 V, VFB = VREF + 0.1 V, TJ up to 85°C | 5 | |
| Shutdown current into VIN and SW pin | ISD | 0.1 | 0.2 | µA | IC disabled, VIN = VSW = 3.6 V, TJ = 25°C | 5 | |
| Leakage current at FB pin | IFB_LKG | 4 | 20 | nA | TJ = 25°C | 5 | |
| Leakage current into VOUT pin | IVOUT_LKG | 1 | 3 | µA | IC disabled, VIN = 0 V, VSW = 0 V, VOUT = 5.5 V, TJ = 25°C | 5 | |
| Input voltage range (recommended) | VIN | 0.5 | 5.5 | V | 4 | ||
| Output voltage setting range (recommended) | VOUT | 2.2 | 5.5 | V | 4 | ||
| Effective inductance range | L | 0.37 | 1 | 2.9 | µH | 4 | |
| Effective input capacitance range | CIN | 1 | 4.7 | µF | 4 | ||
| Effective output capacitance range | COUT | 4 | 10 | 1000 | µF | 4 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Voltage range at terminals (VIN, EN, FB, SW, VOUT) | -0.3 | 7 | V | 4 | |||
| SW spike | -0.7 | 8 | V | 10 ns | 4 | ||
| SW spike | -0.7 | 9 | V | 1 ns | 4 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Output over-voltage protection hysteresis | VOVP_HYS | 0.1 | V | 5 | |||
| Leakage current at FB pin | IFB_LKG | 6 | nA | TJ = 125°C | 5 | ||
| Soft startup time | tSS | 700 | µs | From active EN to VOUT regulation. VIN = 2.5 V, VOUT = 5.0 V, COUT_EFF = 10μF, IOUT = 0 | 5 | ||
| High-side MOSFET on resistance | RDS(on) | 68 | mΩ | VOUT = 5.0 V | 5 | ||
| Low-side MOSFET on resistance | RDS(on) | 47 | mΩ | VOUT = 5.0 V | 5 | ||
| Switching frequency | fSW | 1 | MHz | VIN = 3.6 V, VOUT = 5.0 V, PWM mode | 5 | ||
| Switching frequency | fSW | 0.5 | MHz | VIN = 1.0 V, VOUT = 5.0 V, PWM mode | 5 | ||
| EN logic high threshold | VEN_H | 1.2 | V | VIN > 1.8 V or VOUT > 2.2 V | 5 | ||
| Thermal shutdown threshold | TSD | 150 | °C | TJ rising | 5 | ||
| Thermal shutdown hysteresis | TSD_HYS | 20 | °C | TJ falling below TSD | 5 | ||
| Junction-to-ambient thermal resistance (first data column, board not labelled) | RθJA | 142.7 | °C/W | DRL (SOT563) - 6 PINS | 4 | ||
| Junction-to-ambient thermal resistance (Standard EVM) | RθJA | 91.4 | °C/W | Standard EVM, 4-layer, 2oz copper, 50mm×38mm PCB | 4 | ||
| Junction-to-case thermal resistance | RθJC | 55.7 | °C/W | DRL (SOT563) - 6 PINS | 4 | ||
| Junction-to-board thermal resistance | RθJB | 31 | °C/W | DRL (SOT563) - 6 PINS | 4 | ||
| Junction-to-top characterization parameter (first data column, board not labelled) | ΨJT | 1.4 | °C/W | DRL (SOT563) - 6 PINS | 4 | ||
| Junction-to-top characterization parameter (Standard EVM) | ΨJT | 5.3 | °C/W | Standard EVM, 4-layer, 2oz copper, 50mm×38mm PCB | 4 | ||
| Junction-to-board characterization parameter (first data column, board not labelled) | ΨJB | 30.7 | °C/W | DRL (SOT563) - 6 PINS | 4 | ||
| Junction-to-board characterization parameter (Standard EVM) | ΨJB | 38.1 | °C/W | Standard EVM, 4-layer, 2oz copper, 50mm×38mm PCB | 4 |
CAD (KiCad official)
- Symbol:
TPS61023DRLT - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
tps61023drlt-etched.step/tps61023drlt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61023drlt.step/tps61023drlt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
3584f283b8c8ce7f, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).