TPS60204DGSR

{
  "slug": "tps60204dgsr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "tps60204dgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps60204dgsr.kicad_sym",
    "tps60204dgsr.kicad_mod",
    "tps60204dgsr.glb",
    "tps60204dgsr.step",
    "tps60204dgsr.lbr",
    "docs/hero.png",
    "docs/tps60204dgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps60204dgsr-hero.glb",
    "tps60204dgsr-hero.overlay.json",
    "tps60204dgsr-etched.glb"
  ],
  "component": {
    "mpn": "TPS60204DGSR",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Power Management ICs",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps60204dgsr.pdf",
    "parts": {
      "symbol": "tps60204dgsr.kicad_sym",
      "footprint": "tps60204dgsr.kicad_mod",
      "model_3d": "tps60204dgsr-hero.glb",
      "model_3d_plain": "tps60204dgsr-etched.glb",
      "model_3d_step": "tps60204dgsr-etched.step",
      "model_3d_step_plain": "tps60204dgsr.step",
      "lbr": "tps60204dgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C485988",
      "digikey": "296-TPS60204DGSRTR-ND",
      "mouser": "595-TPS60204DGSR"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T06:06:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS60204DGSRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS60204DGSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LBI",
        "type": "input",
        "description": "Low-battery detector input for the TPS60204; LBO goes low when LBI drops below the 1.18 V threshold, and LBI must be connected to GND if the detector is not used."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "Negative terminal of the flying capacitor C1."
      },
      {
        "number": "4",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of the flying capacitor C1."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated 3.3-V power output; bypass OUT to GND with the output filter capacitor Co."
      },
      {
        "number": "6",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of the flying capacitor C2."
      },
      {
        "number": "7",
        "name": "IN",
        "type": "power_in",
        "description": "Supply input (1.8 V to 3.6 V input range); bypass IN to GND with a capacitor of the same size as Co."
      },
      {
        "number": "8",
        "name": "C2-",
        "type": "passive",
        "description": "Negative terminal of the flying capacitor C2."
      },
      {
        "number": "9",
        "name": "EN",
        "type": "input",
        "description": "Device-enable input: low disables the device and isolates output from input, high runs from the internal oscillator, and an external clock (max 800 kHz) on EN synchronizes the converter."
      },
      {
        "number": "10",
        "name": "LBO",
        "type": "output",
        "description": "Open-drain low-battery detector output for the TPS60204, pulled low when LBI drops below 1.18 V; requires a pullup resistor to OUT or a logic rail below 3.6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 6,
        "cost_usd": 0.0762,
        "at": "2026-10-23T06:05:38"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps60204dgsr.pdf",
        "pages": 21,
        "sha256": "ce23431792a9b833",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps60204dgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps60204dgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f9948da4f0d0e41e49c765f5a142824ee3d41032b0e9a859e49152d99f4949e1",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}