TPS563206DRLR

{
  "slug": "tps563206drlr",
  "version": "0.1.0",
  "type": "component",
  "description": "TEXAS INSTRUMENTS Global Sourcing Parts, SOT-563-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "tps563206drlr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps563206drlr.kicad_sym",
    "tps563206drlr.kicad_mod",
    "tps563206drlr.glb",
    "tps563206drlr.step",
    "tps563206drlr.lbr",
    "docs/hero.png",
    "docs/tps563206drlr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps563206drlr-hero.glb",
    "tps563206drlr-hero.overlay.json",
    "tps563206drlr-etched.glb"
  ],
  "component": {
    "mpn": "TPS563206DRLR",
    "manufacturer": "TEXAS INSTRUMENTS",
    "package": "SOT-563-6",
    "pin_count": 6,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps563206.pdf",
    "parts": {
      "symbol": "tps563206drlr.kicad_sym",
      "footprint": "tps563206drlr.kicad_mod",
      "model_3d": "tps563206drlr-hero.glb",
      "model_3d_plain": "tps563206drlr-etched.glb",
      "model_3d_step": "tps563206drlr-etched.step",
      "model_3d_step_plain": "tps563206drlr.step",
      "lbr": "tps563206drlr.lbr"
    },
    "distributor_links": {
      "lcsc": "C22427434",
      "digikey": "296-TPS563206DRLRTR-ND",
      "mouser": "595-TPS563206DRLR"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T22:24:35Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS563206DRLRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS563206DRLR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage supply pin; the recommended input voltage range is 4.2 V to 17 V (absolute maximum 18 V)."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "output",
        "description": "Switch node connection between the high-side NFET and low-side NFET; recommended SW voltage is -1 V to 17 V (-6 V to 19 V for under 20 ns)."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, source terminal of the low-side power NFET and ground for the controller circuit; connect the sensitive FB to this GND at a single point."
      },
      {
        "number": "4",
        "name": "BST",
        "type": "output",
        "description": "Supply input for the high-side NFET gate drive circuit; connect a 0.1-µF capacitor between BST and SW (recommended BST voltage -0.1 V to 23 V)."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Active-high enable input that must be pulled up to enable the device; recommended input voltage range is -0.1 V to 5.5 V."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Converter feedback input; connect to the output voltage through a feedback resistor divider (recommended input range -0.1 V to 5.5 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet Table 4-1 lists VIN as type 'I' (input). It is mapped to KiCad power_in because it is the ; Datasheet lists SW and BST as type 'O' (output). Mapped to KiCad output per the datasheet; SW is a s; Pin numbers are taken from the NO. column of Table 4-1 (Pin Functions). The pin-figure text in the e"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0603,
        "at": "2026-11-05T22:24:25"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps563206.pdf",
        "pages": 30,
        "sha256": "c47f395bebb29883",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps563206drlr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.6,
          1.6,
          0.63
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "76c34aa4905777c0a8abe4718019904a3a9f8343cab7cc056f4516b7ef5165fc",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps563206drlr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.6,
          1.6,
          0.63
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0382bb836d3ca9875a2d47b46ec9a59c94120cdd6241257cfdb6fbdb1fbf25c4",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}