Generated by kicad-footprint-generator · KiCad file format 20260206
TPS562201DDCR
Texas Instruments · DC-DC Converters · TSOT-23-6
TPS562201DDCR from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin is the source terminal of the low-side power NFET and the ground terminal for the controller circuit, and sensitive VFB must connect to this GND at a single point. |
| 2 | SW | output | Switch node connection between the high-side NFET and the low-side NFET. |
| 3 | VIN | power_in | Input voltage supply pin, which is the drain terminal of the high-side power NFET and operates from 4.5 V to 17 V. |
| 4 | VFB | input | Converter feedback input that connects to the output voltage through a feedback resistor divider. |
| 5 | EN | input | Enable input control that is active high and must be pulled up to enable the device. |
| 6 | VBST | power_in | Supply input for the high-side NFET gate drive circuit, which requires a 0.1-µF capacitor connected between VBST and SW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN, EN | VIN, EN | -0.3 | 19 | V | 4 | ||
| Input voltage VBST | VBST | -0.3 | 25 | V | 4 | ||
| Input voltage VBST (10-ns transient) | VBST | -0.3 | 27 | V | 10-ns transient | 4 | |
| Input voltage VBST (vs SW) | VBST (vs SW) | -0.3 | 6 | V | 4 | ||
| Input voltage VFB | VFB | -0.3 | 6 | V | 4 | ||
| Input voltage SW | SW | -2 | 19 | V | 4 | ||
| Input voltage SW (10 ns transient) | SW | -3.5 | 21 | V | 10 ns transient | 4 | |
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Supply input voltage | VIN | 4.5 | 17 | V | 4 | ||
| Input voltage VBST | VI | -0.1 | 23 | V | 4 | ||
| Input voltage VBST (10-ns transient) | VI | -0.1 | 26 | V | 10-ns transient | 4 | |
| Input voltage VBST (vs SW) | VBST(vs SW) | -0.1 | 5.5 | V | 4 | ||
| Input voltage EN | EN | -0.1 | 17 | V | 4 | ||
| Input voltage VFB | VFB | -0.1 | 5.5 | V | 4 | ||
| Input voltage SW | SW | -1.8 | 17 | V | 4 | ||
| Input voltage SW (10 ns transient) | SW | -3.5 | 20 | V | 10 ns transient | 4 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Operating, non-switching supply current | IVIN | 120 | 200 | µA | VIN current, EN = 5 V, VFB = 0.9 V | 5 | |
| EN high-level input voltage | VENH | 1.6 | V | 5 | |||
| EN low-level input voltage | VENL | 0.8 | V | 5 | |||
| EN pin resistance to GND | REN | 600 | 1500 | 2400 | kΩ | VEN = 1.5 V | 5 |
| VFB threshold voltage (Eco-mode) | VFBTH | 774 | mV | VO = 1.05 V, IO = 10 mA, Eco-mode operation | 5 | ||
| VFB threshold voltage (continuous mode) | VFBTH | 749 | 768 | 787 | mV | VO = 1.05 V, continuous mode operation | 5 |
| VFB input current | IVFB | -0.1 | 0 | 0.1 | µA | VFB = 0.8 V | 5 |
| Current limit | Iocl | 2.4 | 3.2 | 4 | A | DC current, VOUT = 1.05 V, L1 = 2.2 µH | 5 |
| Minimum off time | tOFF(MIN) | 220 | 310 | ns | VFB = 0.5 V | 5 | |
| UVLO wake up VIN voltage | UVLO | 3.8 | 4.3 | V | 5 | ||
| UVLO shut down VIN voltage | UVLO | 3.3 | 3.4 | V | 5 | ||
| Shutdown supply current | IVINSDN | 8 | 20 | µA | VIN current, EN = 0 V | 5 | |
| EN pulldown current | IEN | 1 | µA | VEN = 1.5 V | 5 | ||
| High-side switch resistance | RDS(on)h | 140 | mΩ | TA = 25°C, VBST, SW = 5 V | 5 | ||
| Low-side switch resistance | RDS(on)l | 84 | mΩ | TA = 25°C | 5 | ||
| Thermal shutdown threshold | TSDN | 160 | °C | Shutdown temperature | 5 | ||
| Thermal shutdown hysteresis | TSDN | 25 | °C | Hysteresis | 5 | ||
| Soft-start time | tss | 1 | ms | Internal soft-start time | 5 | ||
| Switching frequency | Fsw | 580 | kHz | VIN = 12 V, VO = 3.3 V, IO = 1 A | 5 | ||
| Output UVP threshold | VUVP | 65 | % | Hiccup detect (H > L) | 5 | ||
| Hiccup wait time | THICCUP_WAIT | 1.2 | ms | 5 | |||
| Hiccup time before restart | THICCUP_RE | 10 | ms | 5 | |||
| UVLO hysteresis VIN voltage | UVLO | 0.4 | V | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 90.8 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 42.3 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 16.3 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 2.6 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 16.3 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TPS562201DDCR - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tps562201ddcr-etched.step/tps562201ddcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps562201ddcr.step/tps562201ddcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
c9aab162caefe03b, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).