main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps560430ydbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps560430ydbvr: viewers · Ray
package.json tps560430ydbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps560430ydbvr: specified limits as data (metadata.characteristics, 33 rows from the datasheet) · Ray
README.md tps560430ydbvr: specified limits as data (metadata.characteristics, 33 rows from the datasheet) · Ray
tps560430ydbvr-etched.fit.json tps560430ydbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps560430ydbvr-etched.glb tps560430ydbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps560430ydbvr-etched.step tps560430ydbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps560430ydbvr.glb Publish 0.1.0 · Ray
tps560430ydbvr.kicad_mod Publish 0.1.0 · Ray
tps560430ydbvr.kicad_sym Publish 0.1.0 · Ray
tps560430ydbvr.lbr Publish 0.1.0 · Ray
tps560430ydbvr.step Publish 0.1.0 · Ray

TPS560430YDBVR

Texas Instruments · DC-DC Converters · SOT-23-6

TPS560430YDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CB power_out Bootstrap capacitor connection for high-side FET driver rated -0.3 V to 5.5 V relative to SW pin.
2 GND power_in Power ground terminal serving as system ground reference and internally connected to low-side MOSFET source.
3 FB input Feedback input for output voltage regulation via resistor divider network, rated 0 V to 4.5 V, do not short to ground during operation.
4 EN input Precision enable input with high-state enabling operation and low-state shutting down device, rated 0 V to VIN, do not float.
5 VIN power_in Supply input terminal for internal bias LDO and high-side FET with recommended operating range of 4 V to 36 V and absolute maximum of 38 V.
6 SW power_out Switching node output connected to power inductor, internally connected to high-side and low-side FET junction, rated -0.3 V to VIN + 0.3 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to GND -0.3 38 V 4
EN to GND -0.3 V 4
FB to GND -0.3 5.5 V 4
SW to GND -0.3 V 4
SW to GND less than 10 ns transient -3.5 38 V less than 10 ns transient 4
CB to SW -0.3 5.5 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
VIN to GND 4 36 V 4
EN 0 V 4
FB 0 4.5 V 4
Output voltage VOUT 1 V 4
Output current IOUT 0 600 mA 4
Operating junction temperature range TJ -40 125 °C 4
Input operation voltage 4 36 V 5
Undervoltage lockout rising threshold VIN_UVLO 3.55 3.75 4 V Rising threshold 5
Undervoltage lockout falling threshold VIN_UVLO 3.25 3.45 3.65 V Falling threshold 5
Operating quiescent current (non-switching) IQ 80 120 µA PFM version, VEN = 3.3 V, VFB = 1.1V 5
Shutdown current ISHDN 3 10 µA VEN = 0 V 5
Enable rising threshold voltage VEN_H 1.1 1.23 1.36 V 5
Enable falling threshold voltage VEN_L 0.95 1.1 1.22 V 5
Leakage current at EN pin IEN 10 200 nA VEN = 3.3 V 5
Reference voltage VREF 0.995 1 1.005 V TJ = 25 °C 5
Reference voltage VREF 0.985 1 1.015 V TJ = –40 °C to 125 °C 5
Leakage current at FB pin IFB 0.2 50 nA VFB = 1.2 V 5
Peak inductor current limit IHS_LIMIT 0.8 1.1 1.4 A 5
Valley inductor current limit ILS_LIMIT 0.62 0.8 0.98 A 5
Oscillator frequency fSW 1.785 2.1 2.415 MHz 2.1-MHz version 6
Junction-to-ambient thermal resistance RθJA 173 °C/W 4
Junction-to-case (TOP) thermal resistance RθJC_T 116 °C/W 4
Junction-to-case (BOTTOM) thermal resistance RθJC_B 31 °C/W 4
Junction-to-top characterization parameter ψJT 20 °C/W 4
Junction-to-board characterization parameter ψJB 30 °C/W 4

CAD (KiCad official)

  • Symbol: TPS560430YDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tps560430ydbvr-etched.step / tps560430ydbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps560430ydbvr.step / tps560430ydbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 f5d28f16b7ee0c6e, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF