3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS560430YDBVR
Texas Instruments · DC-DC Converters · SOT-23-6
TPS560430YDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | power_out | Bootstrap capacitor connection for high-side FET driver rated -0.3 V to 5.5 V relative to SW pin. |
| 2 | GND | power_in | Power ground terminal serving as system ground reference and internally connected to low-side MOSFET source. |
| 3 | FB | input | Feedback input for output voltage regulation via resistor divider network, rated 0 V to 4.5 V, do not short to ground during operation. |
| 4 | EN | input | Precision enable input with high-state enabling operation and low-state shutting down device, rated 0 V to VIN, do not float. |
| 5 | VIN | power_in | Supply input terminal for internal bias LDO and high-side FET with recommended operating range of 4 V to 36 V and absolute maximum of 38 V. |
| 6 | SW | power_out | Switching node output connected to power inductor, internally connected to high-side and low-side FET junction, rated -0.3 V to VIN + 0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | -0.3 | 38 | V | 4 | |||
| EN to GND | -0.3 | V | 4 | ||||
| FB to GND | -0.3 | 5.5 | V | 4 | |||
| SW to GND | -0.3 | V | 4 | ||||
| SW to GND less than 10 ns transient | -3.5 | 38 | V | less than 10 ns transient | 4 | ||
| CB to SW | -0.3 | 5.5 | V | 4 | |||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VIN to GND | 4 | 36 | V | 4 | |||
| EN | 0 | V | 4 | ||||
| FB | 0 | 4.5 | V | 4 | |||
| Output voltage | VOUT | 1 | V | 4 | |||
| Output current | IOUT | 0 | 600 | mA | 4 | ||
| Operating junction temperature range | TJ | -40 | 125 | °C | 4 | ||
| Input operation voltage | 4 | 36 | V | 5 | |||
| Undervoltage lockout rising threshold | VIN_UVLO | 3.55 | 3.75 | 4 | V | Rising threshold | 5 |
| Undervoltage lockout falling threshold | VIN_UVLO | 3.25 | 3.45 | 3.65 | V | Falling threshold | 5 |
| Operating quiescent current (non-switching) | IQ | 80 | 120 | µA | PFM version, VEN = 3.3 V, VFB = 1.1V | 5 | |
| Shutdown current | ISHDN | 3 | 10 | µA | VEN = 0 V | 5 | |
| Enable rising threshold voltage | VEN_H | 1.1 | 1.23 | 1.36 | V | 5 | |
| Enable falling threshold voltage | VEN_L | 0.95 | 1.1 | 1.22 | V | 5 | |
| Leakage current at EN pin | IEN | 10 | 200 | nA | VEN = 3.3 V | 5 | |
| Reference voltage | VREF | 0.995 | 1 | 1.005 | V | TJ = 25 °C | 5 |
| Reference voltage | VREF | 0.985 | 1 | 1.015 | V | TJ = –40 °C to 125 °C | 5 |
| Leakage current at FB pin | IFB | 0.2 | 50 | nA | VFB = 1.2 V | 5 | |
| Peak inductor current limit | IHS_LIMIT | 0.8 | 1.1 | 1.4 | A | 5 | |
| Valley inductor current limit | ILS_LIMIT | 0.62 | 0.8 | 0.98 | A | 5 | |
| Oscillator frequency | fSW | 1.785 | 2.1 | 2.415 | MHz | 2.1-MHz version | 6 |
| Junction-to-ambient thermal resistance | RθJA | 173 | °C/W | 4 | |||
| Junction-to-case (TOP) thermal resistance | RθJC_T | 116 | °C/W | 4 | |||
| Junction-to-case (BOTTOM) thermal resistance | RθJC_B | 31 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 20 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 30 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPS560430YDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tps560430ydbvr-etched.step/tps560430ydbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps560430ydbvr.step/tps560430ydbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
f5d28f16b7ee0c6e, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).