main
Ray tps54626pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 784ee8c
{
  "slug": "tps54626pwpr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tps54626pwpr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps54626pwpr.kicad_sym",
    "tps54626pwpr.kicad_mod",
    "tps54626pwpr.glb",
    "tps54626pwpr.step",
    "tps54626pwpr.lbr",
    "docs/hero.png",
    "docs/tps54626pwpr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS54626PWPR",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-14-EP",
    "pin_count": 15,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps54626",
    "parts": {
      "symbol": "tps54626pwpr.kicad_sym",
      "footprint": "tps54626pwpr.kicad_mod",
      "model_3d": "tps54626pwpr-etched.glb",
      "model_3d_plain": "tps54626pwpr.glb",
      "model_3d_step": "tps54626pwpr-etched.step",
      "model_3d_step_plain": "tps54626pwpr.step",
      "lbr": "tps54626pwpr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2071308"
    },
    "pins": [
      {
        "number": "1",
        "name": "VO",
        "type": "power_out",
        "description": "Connect to output of converter; also used for the output discharge function."
      },
      {
        "number": "2",
        "name": "VFB",
        "type": "input",
        "description": "Converter feedback input; connect with a feedback resistor divider from VO."
      },
      {
        "number": "3",
        "name": "VREG5",
        "type": "power_out",
        "description": "5.5V internal linear regulator output for control circuitry; a typical 1uF capacitor should be connected to GND; not active when EN is low."
      },
      {
        "number": "4",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start control pin; an external capacitor connected to GND sets the soft-start ramp time (6uA typical charge current)."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Signal ground pin for the control circuitry."
      },
      {
        "number": "6",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output; requires an external pull-up resistor (25k-150kOhm) to VREG5."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Enable control input, active high; must be pulled up to enable the device (internal pull-down resistance to GND of 200-800kOhm)."
      },
      {
        "number": "8",
        "name": "PGND1",
        "type": "power_in",
        "description": "Ground return for the low-side MOSFET; also serves as an input to the current comparator; connect strongly to GND near the IC."
      },
      {
        "number": "9",
        "name": "PGND2",
        "type": "power_in",
        "description": "Ground return for the low-side MOSFET; also serves as an input to the current comparator; connect strongly to GND near the IC."
      },
      {
        "number": "10",
        "name": "SW1",
        "type": "output",
        "description": "Switch node connection between the high-side and low-side NFETs; also serves as an input to the current comparator."
      },
      {
        "number": "11",
        "name": "SW2",
        "type": "output",
        "description": "Switch node connection between the high-side and low-side NFETs; also serves as an input to the current comparator."
      },
      {
        "number": "12",
        "name": "VBST",
        "type": "passive",
        "description": "Supply input for the high-side NFET gate driver (boost terminal); connect a capacitor from this pin to the SW1/SW2 terminals; an internal PN diode connects VREG5 to this pin."
      },
      {
        "number": "13",
        "name": "VIN1",
        "type": "power_in",
        "description": "Power input, connected to the high-side NFET drain."
      },
      {
        "number": "14",
        "name": "VIN2",
        "type": "power_in",
        "description": "Power input, connected to the high-side NFET drain; an additional 0.1uF capacitor from this pin to ground is recommended to improve stability of the over-current limit function."
      },
      {
        "number": "15",
        "name": "PowerPAD",
        "type": "power_in",
        "description": "Exposed thermal pad on the package backside, internally connected to PGND; must be soldered to the PCB ground plane to achieve appropriate power dissipation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Exposed thermal pad (PowerPAD) is mentioned in device information section but is not assigned a numb",
          "exposed pad 15 added from the footprint"
        ],
        "pages_sent": 23,
        "cost_usd": 0.2768,
        "at": "2026-09-23T07:41:09"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps54626",
        "pages": 23,
        "sha256": "6a77b8bc07cb116a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 15,
        "described": 15,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps54626pwpr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5.0,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps54626pwpr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5.0,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "20fd110ba3e23a96e71bb30818873ef27a4bfbf94e52397aa95cd83586164aa5",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}