main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps54418rter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps54418rter: viewers · Ray
package.json tps54418rter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps54418rter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps54418rter · Ray
tps54418rter-etched.fit.json tps54418rter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54418rter-etched.glb tps54418rter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54418rter-etched.step tps54418rter: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54418rter.glb Publish 0.1.0 · Ray
tps54418rter.kicad_mod Publish 0.1.0 · Ray
tps54418rter.kicad_sym Publish 0.1.0 · Ray
tps54418rter.lbr Publish 0.1.0 · Ray
tps54418rter.step Publish 0.1.0 · Ray

TPS54418RTER

Texas Instruments · DC-DC Converters · WQFN-16-EP(3x3)

TPS54418RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage with operating range from 2.95 V to 6 V.
2 VIN power_in Input supply voltage with operating range from 2.95 V to 6 V.
3 GND power_in Power ground, should be connected directly to the exposed power pad under the device.
4 GND power_in Power ground, should be connected directly to the exposed power pad under the device.
5 AGND power_in Analog ground, should be electrically connected to GND close to the device.
6 VSENSE input Inverting input of the transconductance error amplifier connected to resistor divider from output voltage.
7 COMP output Error amplifier output with frequency compensation components connected; internally compared to switch current.
8 RT/CLK input Resistor timing or external clock input: 85 kΩ to 1000 kΩ resistor sets switching frequency from 200 kHz to 2000 kHz, or external clock with minimum 75 ns pulse width.
9 SS input Soft-start pin where external capacitor sets output voltage rise time; charged by 1.8 μA internal current source.
10 PH output Switching node connecting the source of the high-side power MOSFET and drain of the low-side synchronous rectifier MOSFET.
11 PH output Switching node connecting the source of the high-side power MOSFET and drain of the low-side synchronous rectifier MOSFET.
12 PH output Switching node connecting the source of the high-side power MOSFET and drain of the low-side synchronous rectifier MOSFET.
13 BOOT input Bootstrap supply pin requiring 0.1 μF ceramic capacitor between BOOT and PH; monitored by UVLO with 2.1 V minimum threshold at 2.95 V input.
14 PWRGD output Open-drain power good output pulled low when VSENSE falls below 93% or rises above 107% of 0.8 V reference.
15 EN input Enable pin with internal pull-up current source; pull below 1.25 V threshold to disable; external resistors adjust UVLO.
16 VIN power_in Input supply voltage with operating range from 2.95 V to 6 V.
17 Thermal Pad power_in Exposed power pad soldered to PCB ground plane with multiple vias for thermal and mechanical performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

CAD (KiCad official)

  • Symbol: TPS54418RTER
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps54418rter-etched.step / tps54418rter-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54418rter.step / tps54418rter.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 d86efb2911352e10, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF