← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# TPS54418RTER++**Texas Instruments** · DC-DC Converters · WQFN-16-EP(3x3)++TPS54418RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VIN | power_in | Input supply voltage with operating range from 2.95 V to 6 V. |+| 2 | VIN | power_in | Input supply voltage with operating range from 2.95 V to 6 V. |+| 3 | GND | power_in | Power ground, should be connected directly to the exposed power pad under the device. |+| 4 | GND | power_in | Power ground, should be connected directly to the exposed power pad under the device. |+| 5 | AGND | power_in | Analog ground, should be electrically connected to GND close to the device. |+| 6 | VSENSE | input | Inverting input of the transconductance error amplifier connected to resistor divider from output voltage. |+| 7 | COMP | output | Error amplifier output with frequency compensation components connected; internally compared to switch current. |+| 8 | RT/CLK | input | Resistor timing or external clock input: 85 kΩ to 1000 kΩ resistor sets switching frequency from 200 kHz to 2000 kHz, or external clock with minimum 75 ns pulse width. |+| 9 | SS | input | Soft-start pin where external capacitor sets output voltage rise time; charged by 1.8 μA internal current source. |+| 10 | PH | output | Switching node connecting the source of the high-side power MOSFET and drain of the low-side synchronous rectifier MOSFET. |+| 11 | PH | output | Switching node connecting the source of the high-side power MOSFET and drain of the low-side synchronous rectifier MOSFET. |+| 12 | PH | output | Switching node connecting the source of the high-side power MOSFET and drain of the low-side synchronous rectifier MOSFET. |+| 13 | BOOT | input | Bootstrap supply pin requiring 0.1 μF ceramic capacitor between BOOT and PH; monitored by UVLO with 2.1 V minimum threshold at 2.95 V input. |+| 14 | PWRGD | output | Open-drain power good output pulled low when VSENSE falls below 93% or rises above 107% of 0.8 V reference. |+| 15 | EN | input | Enable pin with internal pull-up current source; pull below 1.25 V threshold to disable; external resistors adjust UVLO. |+| 16 | VIN | power_in | Input supply voltage with operating range from 2.95 V to 6 V. |+| 17 | Thermal Pad | power_in | Exposed power pad soldered to PCB ground plane with multiple vias for thermal and mechanical performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS54418RTER`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps54418rter-etched.step` / `tps54418rter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps54418rter.step` / `tps54418rter.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps54418) (41 pp, sha256 `d86efb2911352e10`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps54418rter-datasheet.pdf)
page.jsonadded+195@@ -0,0 +1,195 @@+{+ "slug": "tps54418rter",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps54418rter",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps54418rter.kicad_sym",+ "tps54418rter.kicad_mod",+ "tps54418rter.glb",+ "tps54418rter.step",+ "tps54418rter.lbr",+ "docs/hero.png",+ "docs/tps54418rter-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS54418RTER",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps54418",+ "parts": {+ "symbol": "tps54418rter.kicad_sym",+ "footprint": "tps54418rter.kicad_mod",+ "model_3d": "tps54418rter-etched.glb",+ "model_3d_plain": "tps54418rter.glb",+ "model_3d_step": "tps54418rter-etched.step",+ "model_3d_step_plain": "tps54418rter.step",+ "lbr": "tps54418rter.lbr"+ },+ "distributor_links": {+ "lcsc": "C545176"+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage with operating range from 2.95 V to 6 V."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage with operating range from 2.95 V to 6 V."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground, should be connected directly to the exposed power pad under the device."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground, should be connected directly to the exposed power pad under the device."+ },+ {+ "number": "5",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground, should be electrically connected to GND close to the device."+ },+ {+ "number": "6",+ "name": "VSENSE",+ "type": "input",+ "description": "Inverting input of the transconductance error amplifier connected to resistor divider from output voltage."+ },+ {+ "number": "7",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output with frequency compensation components connected; internally compared to switch current."+ },+ {+ "number": "8",+ "name": "RT/CLK",+ "type": "input",+ "description": "Resistor timing or external clock input: 85 kΩ to 1000 kΩ resistor sets switching frequency from 200 kHz to 2000 kHz, or external clock with minimum 75 ns pulse width."+ },+ {+ "number": "9",+ "name": "SS",+ "type": "input",+ "description": "Soft-start pin where external capacitor sets output voltage rise time; charged by 1.8 μA internal current source."+ },+ {+ "number": "10",+ "name": "PH",+ "type": "output",+ "description": "Switching node connecting the source of the high-side power MOSFET and drain of the low-side synchronous rectifier MOSFET."+ },+ {+ "number": "11",+ "name": "PH",+ "type": "output",+ "description": "Switching node connecting the source of the high-side power MOSFET and drain of the low-side synchronous rectifier MOSFET."+ },+ {+ "number": "12",+ "name": "PH",+ "type": "output",+ "description": "Switching node connecting the source of the high-side power MOSFET and drain of the low-side synchronous rectifier MOSFET."+ },+ {+ "number": "13",+ "name": "BOOT",+ "type": "input",+ "description": "Bootstrap supply pin requiring 0.1 μF ceramic capacitor between BOOT and PH; monitored by UVLO with 2.1 V minimum threshold at 2.95 V input."+ },+ {+ "number": "14",+ "name": "PWRGD",+ "type": "output",+ "description": "Open-drain power good output pulled low when VSENSE falls below 93% or rises above 107% of 0.8 V reference."+ },+ {+ "number": "15",+ "name": "EN",+ "type": "input",+ "description": "Enable pin with internal pull-up current source; pull below 1.25 V threshold to disable; external resistors adjust UVLO."+ },+ {+ "number": "16",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage with operating range from 2.95 V to 6 V."+ },+ {+ "number": "17",+ "name": "Thermal Pad",+ "type": "power_in",+ "description": "Exposed power pad soldered to PCB ground plane with multiple vias for thermal and mechanical performance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 41,+ "cost_usd": 0.4402,+ "at": "2026-09-24T01:42:31"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps54418",+ "pages": 41,+ "sha256": "d86efb2911352e10",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}