TPS54360BQDDAQ1

{
  "slug": "tps54360bqddaq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps54360bqddaq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps54360bqddaq1.kicad_sym",
    "tps54360bqddaq1.kicad_mod",
    "tps54360bqddaq1.glb",
    "tps54360bqddaq1.step",
    "tps54360bqddaq1.lbr",
    "docs/hero.png",
    "docs/tps54360bqddaq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps54360bqddaq1-hero.glb",
    "tps54360bqddaq1-hero.overlay.json",
    "tps54360bqddaq1-etched.glb"
  ],
  "component": {
    "mpn": "TPS54360BQDDAQ1",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8-EP",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps54360b-q1.pdf",
    "parts": {
      "symbol": "tps54360bqddaq1.kicad_sym",
      "footprint": "tps54360bqddaq1.kicad_mod",
      "model_3d": "tps54360bqddaq1-hero.glb",
      "model_3d_plain": "tps54360bqddaq1-etched.glb",
      "model_3d_step": "tps54360bqddaq1-etched.step",
      "model_3d_step_plain": "tps54360bqddaq1.step",
      "lbr": "tps54360bqddaq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C1355717",
      "digikey": "296-48460-ND",
      "mouser": "595-TPS54360BQDDAQ1"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T22:37:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-48460-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS54360BQDDAQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "output",
        "description": "A bootstrap capacitor is required between BOOT and SW, and if its voltage falls below the minimum needed for the high-side MOSFET the output switches off until it is refreshed."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage with a 4.5-V to 60-V operating range."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable pin with an internal pullup current source that disables the device when pulled below 1.2 V and enables it when floating, and whose input undervoltage lockout is adjustable with two resistors."
      },
      {
        "number": "4",
        "name": "RT/CLK",
        "type": "input",
        "description": "Sets the switching frequency with an external resistor to ground, or when pulled above the PLL upper threshold becomes a high-impedance synchronization clock input."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the transconductance (gm) error amplifier."
      },
      {
        "number": "6",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output and input to the output switch PWM current comparator, where frequency compensation components connect."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be electrically connected to the exposed thermal pad on the printed circuit board for proper operation."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "output",
        "description": "Source of the internal high-side power MOSFET and the switching node of the converter."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MPN TPS54360BQDDAQ1 maps to the DDA package, an 8-pin HSOP with PowerPAD (the SOIC-8-EP equivalent).; The datasheet I/O column lists SW as I, but it is the converter switching node driven by the interna; Only the 8 pins of the DDA package are listed. The specifications section was not requested in the s"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0131,
        "at": "2026-11-05T22:37:17"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps54360b-q1.pdf",
        "pages": 50,
        "sha256": "3465d697869310d0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps54360bqddaq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps54360bqddaq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cc8ef43cbed666ba19b38284cb370e3c9cf6ca1c83bff8a84da90694c849a79f",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}