main
Ray tps54318rter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 37e02e8
{
  "slug": "tps54318rter",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps54318rter",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps54318rter.kicad_sym",
    "tps54318rter.kicad_mod",
    "tps54318rter.glb",
    "tps54318rter.step",
    "tps54318rter.lbr",
    "docs/hero.png",
    "docs/tps54318rter-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS54318RTER",
    "manufacturer": "Texas Instruments",
    "package": "QFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps54318",
    "parts": {
      "symbol": "tps54318rter.kicad_sym",
      "footprint": "tps54318rter.kicad_mod",
      "model_3d": "tps54318rter-etched.glb",
      "model_3d_plain": "tps54318rter.glb",
      "model_3d_step": "tps54318rter-etched.step",
      "model_3d_step_plain": "tps54318rter.step",
      "lbr": "tps54318rter.lbr"
    },
    "distributor_links": {
      "lcsc": "C57128"
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage, 2.95 V to 6 V range."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage, 2.95 V to 6 V range."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground, should be electrically connected directly to the power pad under the device."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground, should be electrically connected directly to the power pad under the device."
      },
      {
        "number": "5",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground should be electrically connected to GND close to the device."
      },
      {
        "number": "6",
        "name": "VSENSE",
        "type": "input",
        "description": "Inverting node of the transconductance error amplifier used for output voltage feedback regulation."
      },
      {
        "number": "7",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output and input to the output switch current comparator; connect frequency compensation components to this pin."
      },
      {
        "number": "8",
        "name": "RT/CLK",
        "type": "bidirectional",
        "description": "Resistor timing or external clock input pin for switching frequency adjustment (200 kHz to 2000 kHz) or external clock synchronization (300 kHz to 2000 kHz)."
      },
      {
        "number": "9",
        "name": "SS",
        "type": "bidirectional",
        "description": "Soft-start pin; external capacitor connected to this pin sets the output voltage rise time."
      },
      {
        "number": "10",
        "name": "PH",
        "type": "output",
        "description": "Source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET."
      },
      {
        "number": "11",
        "name": "PH",
        "type": "output",
        "description": "Source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET."
      },
      {
        "number": "12",
        "name": "PH",
        "type": "output",
        "description": "Source of the internal high-side power MOSFET and drain of the internal low-side synchronous rectifier MOSFET."
      },
      {
        "number": "13",
        "name": "BOOT",
        "type": "input",
        "description": "Bootstrap capacitor connection (0.1 μF ceramic required between BOOT and PH); if voltage is below minimum required by BOOT UVLO, output is forced to switch off."
      },
      {
        "number": "14",
        "name": "PWRGD",
        "type": "tri_state",
        "description": "Open drain output that asserts low when output voltage is low due to thermal shutdown, overcurrent, over/under-voltage, or EN shutdown condition."
      },
      {
        "number": "15",
        "name": "EN",
        "type": "input",
        "description": "Enable pin with internal pull-up current source; pull below 1.2 V to disable, float to enable, adjustable UVLO with two external resistors."
      },
      {
        "number": "16",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage, 2.95 V to 6 V range."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 17 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 41,
        "cost_usd": 0.4331,
        "at": "2026-09-22T23:27:17"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps54318",
        "pages": 41,
        "sha256": "1f9f20765ddc24aa",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps54318rter.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps54318rter-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0c0095cda6801175dee9777306b0f45642e2ca44512ad549f173bbb54ed4bfc8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}