main
Ray tps54233dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) b40df1b
{
  "slug": "tps54233dr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps54233dr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps54233dr.kicad_sym",
    "tps54233dr.kicad_mod",
    "tps54233dr.glb",
    "tps54233dr.step",
    "tps54233dr.lbr",
    "docs/hero.png",
    "docs/tps54233dr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS54233DR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps54233.pdf",
    "parts": {
      "symbol": "tps54233dr.kicad_sym",
      "footprint": "tps54233dr.kicad_mod",
      "model_3d": "tps54233dr-etched.glb",
      "model_3d_plain": "tps54233dr.glb",
      "model_3d_step": "tps54233dr-etched.step",
      "model_3d_step_plain": "tps54233dr.step",
      "lbr": "tps54233dr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2873169"
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "passive",
        "description": "Bootstrap supply node; connect 0.1 μF ceramic capacitor between BOOT and PH; integrated boot regulator sources this node; MOSFET disabled if BOOT-PH voltage falls below 2.1 V typical; rated 0-38 V absolute maximum."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input power supply; accepts regulated DC voltage from 3.5 V to 28 V; rated -0.3 V to 30 V absolute maximum; internal supply bias and high-side MOSFET gate driver powered from this pin."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable control input; float to enable converter or pull below 1.25 V threshold to disable; internal pull-up current source (1-3 μA) available for external UVLO threshold divider programming; rated -0.3 V to 6 V absolute maximum."
      },
      {
        "number": "4",
        "name": "SS",
        "type": "passive",
        "description": "Slow start network node; external capacitor (1-27 nF recommended) connects to ground and charges from 2 μA current source to set output voltage rise time from 1 ms to 10 ms; rated -0.3 V to 3 V absolute maximum; 200 μA sink current specified."
      },
      {
        "number": "5",
        "name": "VSENSE",
        "type": "input",
        "description": "Inverting input to transconductance error amplifier (92 μA/V gain, 800 V/V DC gain); connect output voltage divider tap for feedback regulation and closed-loop control; rated -0.3 V to 3 V absolute maximum; 10 μA sink current specified."
      },
      {
        "number": "6",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output and PWM comparator input; attach frequency compensation network (series R and C to ground) to set loop crossover frequency and phase margin; rated -0.3 V to 3 V absolute maximum; source/sink current ±7 μA at 1 V nominal; maximum clamp limits peak inductor current."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; provides return path for all power supplies and signal circuits; fused lead frame improves thermal dissipation; connect to ground plane via multiple vias for heat removal."
      },
      {
        "number": "8",
        "name": "PH",
        "type": "output",
        "description": "Switching node output of integrated high-side MOSFET (80 mΩ typical on-resistance); voltage swings from 0 V to BOOT-PH voltage level during switching; connect to output inductor and catch diode cathode to complete buck converter power stage; rated -0.6 V to 30 V absolute maximum; source current 6 A specified."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 33,
        "cost_usd": 0.3024,
        "at": "2026-09-23T05:59:51"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps54233.pdf",
        "pages": 33,
        "sha256": "82b6671a411fda8e",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps54233dr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps54233dr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bb9d7e3968b60dfac6e39103b625e88d2d525ac86df72d15d584c7fc081aa973",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}