main
Ray
tps54233dr: specified limits as data (metadata.characteristics, 47 rows from the datasheet)
e191200
TPS54233DR
Texas Instruments · DC-DC Converters · SOIC-8
TPS54233DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | passive | Bootstrap supply node; connect 0.1 μF ceramic capacitor between BOOT and PH; integrated boot regulator sources this node; MOSFET disabled if BOOT-PH voltage falls below 2.1 V typical; rated 0-38 V absolute maximum. |
| 2 | VIN | power_in | Input power supply; accepts regulated DC voltage from 3.5 V to 28 V; rated -0.3 V to 30 V absolute maximum; internal supply bias and high-side MOSFET gate driver powered from this pin. |
| 3 | EN | input | Enable control input; float to enable converter or pull below 1.25 V threshold to disable; internal pull-up current source (1-3 μA) available for external UVLO threshold divider programming; rated -0.3 V to 6 V absolute maximum. |
| 4 | SS | passive | Slow start network node; external capacitor (1-27 nF recommended) connects to ground and charges from 2 μA current source to set output voltage rise time from 1 ms to 10 ms; rated -0.3 V to 3 V absolute maximum; 200 μA sink current specified. |
| 5 | VSENSE | input | Inverting input to transconductance error amplifier (92 μA/V gain, 800 V/V DC gain); connect output voltage divider tap for feedback regulation and closed-loop control; rated -0.3 V to 3 V absolute maximum; 10 μA sink current specified. |
| 6 | COMP | output | Error amplifier output and PWM comparator input; attach frequency compensation network (series R and C to ground) to set loop crossover frequency and phase margin; rated -0.3 V to 3 V absolute maximum; source/sink current ±7 μA at 1 V nominal; maximum clamp limits peak inductor current. |
| 7 | GND | power_in | Ground reference; provides return path for all power supplies and signal circuits; fused lead frame improves thermal dissipation; connect to ground plane via multiple vias for heat removal. |
| 8 | PH | output | Switching node output of integrated high-side MOSFET (80 mΩ typical on-resistance); voltage swings from 0 V to BOOT-PH voltage level during switching; connect to output inductor and catch diode cathode to complete buck converter power stage; rated -0.6 V to 30 V absolute maximum; source current 6 A specified. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN pin) | VIN | -0.3 | 30 | V | 4 | ||
| EN pin input voltage | EN | -0.3 | 6 | V | 4 | ||
| BOOT pin voltage | BOOT | 38 | V | 4 | |||
| VSENSE pin voltage | VSENSE | -0.3 | 3 | V | 4 | ||
| COMP pin voltage | COMP | -0.3 | 3 | V | 4 | ||
| SS pin voltage | SS | -0.3 | 3 | V | 4 | ||
| BOOT-PH voltage | BOOT-PH | 8 | V | 4 | |||
| PH output voltage | PH | -0.6 | 30 | V | 4 | ||
| PH transient voltage | PH | -5 | V | 10 ns transient from ground to negative peak | 4 | ||
| EN source current | 100 | μA | 4 | ||||
| BOOT source current | 100 | mA | 4 | ||||
| VSENSE source current | 10 | μA | 4 | ||||
| PH source current | 6 | A | 4 | ||||
| VIN source current | 6 | A | 4 | ||||
| COMP sink current | 100 | μA | 4 | ||||
| SS sink current | 200 | μA | 4 | ||||
| Operating junction temperature (absolute maximum) | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | -65 | 150 | °C | 4 | |||
| Operating input voltage (VIN pin) | VIN | 3.5 | 28 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Voltage reference | 0.772 | 0.8 | 0.828 | V | 5 | ||
| High-side MOSFET on resistance | RDS(on) | 115 | 200 | mΩ | BOOT-PH = 3 V, VIN = 3.5 V | 5 | |
| High-side MOSFET on resistance | RDS(on) | 80 | 150 | mΩ | BOOT-PH = 6 V, VIN = 12 V | 5 | |
| Error amplifier source/sink current | -7 | 7 | μA | V(COMP) = 1 V, 100 mV overdrive | 5 | ||
| Current limit threshold | 2.3 | 3.5 | A | VIN = 12 V | 5 | ||
| Minimum controllable on time | 105 | 130 | ns | VIN = 12 V, 25°C | 5 | ||
| Device switching frequency | fsw | 210 | 300 | 390 | kHz | VIN = 12 V | 5 |
| Maximum controllable duty ratio | 90 | 93 | % | BOOT-PH = 6 V | 5 | ||
| Shutdown supply current | 1 | 4 | μA | EN = 0 V, VIN = 12 V, –40°C to 85°C | 5 | ||
| Operating non-switching supply current | 75 | 110 | μA | VSENSE = 0.85 V | 5 | ||
| Enable threshold | 1.25 | 1.35 | V | Rising and Falling | 5 | ||
| Internal undervoltage lockout threshold | 3.5 | V | Rising and Falling | 5 | |||
| Input current at enable threshold − 50 mV | -1 | μA | Enable threshold − 50 mV | 5 | |||
| Input current at enable threshold + 50 mV | -4 | μA | Enable threshold + 50 mV | 5 | |||
| Error amplifier transconductance (gm) | gm | 92 | μmhos | –2 μA < I(COMP) < 2 μA, V(COMP) = 1 V | 5 | ||
| Error amplifier DC gain | 800 | V/V | VSENSE = 0.8 V | 5 | |||
| Error amplifier unity gain bandwidth | 2.7 | MHz | 5 pF capacitance from COMP to GND pins | 5 | |||
| Switch current to COMP transconductance | 9 | A/V | VIN = 12 V | 5 | |||
| Pulse skipping Eco-mode switch current threshold | 100 | mA | 5 | ||||
| Thermal shutdown | 165 | °C | 5 | ||||
| Slow start charge current | 2 | μA | V(SS) = 0.4 V | 5 | |||
| SS to VSENSE matching | 10 | mV | V(SS) = 0.4 V | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 116.7 | °C/W | D package, 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 62.4 | °C/W | D package, 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 57 | °C/W | D package, 8 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 14.5 | °C/W | D package, 8 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 56.5 | °C/W | D package, 8 pins | 4 |
CAD (KiCad official)
- Symbol:
TPS54233DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps54233dr-etched.step/tps54233dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54233dr.step/tps54233dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
82b6671a411fda8e, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS54233DR
**Texas Instruments** · DC-DC Converters · SOIC-8
TPS54233DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | passive | Bootstrap supply node; connect 0.1 μF ceramic capacitor between BOOT and PH; integrated boot regulator sources this node; MOSFET disabled if BOOT-PH voltage falls below 2.1 V typical; rated 0-38 V absolute maximum. |
| 2 | VIN | power_in | Input power supply; accepts regulated DC voltage from 3.5 V to 28 V; rated -0.3 V to 30 V absolute maximum; internal supply bias and high-side MOSFET gate driver powered from this pin. |
| 3 | EN | input | Enable control input; float to enable converter or pull below 1.25 V threshold to disable; internal pull-up current source (1-3 μA) available for external UVLO threshold divider programming; rated -0.3 V to 6 V absolute maximum. |
| 4 | SS | passive | Slow start network node; external capacitor (1-27 nF recommended) connects to ground and charges from 2 μA current source to set output voltage rise time from 1 ms to 10 ms; rated -0.3 V to 3 V absolute maximum; 200 μA sink current specified. |
| 5 | VSENSE | input | Inverting input to transconductance error amplifier (92 μA/V gain, 800 V/V DC gain); connect output voltage divider tap for feedback regulation and closed-loop control; rated -0.3 V to 3 V absolute maximum; 10 μA sink current specified. |
| 6 | COMP | output | Error amplifier output and PWM comparator input; attach frequency compensation network (series R and C to ground) to set loop crossover frequency and phase margin; rated -0.3 V to 3 V absolute maximum; source/sink current ±7 μA at 1 V nominal; maximum clamp limits peak inductor current. |
| 7 | GND | power_in | Ground reference; provides return path for all power supplies and signal circuits; fused lead frame improves thermal dissipation; connect to ground plane via multiple vias for heat removal. |
| 8 | PH | output | Switching node output of integrated high-side MOSFET (80 mΩ typical on-resistance); voltage swings from 0 V to BOOT-PH voltage level during switching; connect to output inductor and catch diode cathode to complete buck converter power stage; rated -0.6 V to 30 V absolute maximum; source current 6 A specified. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN pin) | VIN | -0.3 | | 30 | V | | 4 |
| EN pin input voltage | EN | -0.3 | | 6 | V | | 4 |
| BOOT pin voltage | BOOT | | | 38 | V | | 4 |
| VSENSE pin voltage | VSENSE | -0.3 | | 3 | V | | 4 |
| COMP pin voltage | COMP | -0.3 | | 3 | V | | 4 |
| SS pin voltage | SS | -0.3 | | 3 | V | | 4 |
| BOOT-PH voltage | BOOT-PH | | | 8 | V | | 4 |
| PH output voltage | PH | -0.6 | | 30 | V | | 4 |
| PH transient voltage | PH | -5 | | | V | 10 ns transient from ground to negative peak | 4 |
| EN source current | | | | 100 | μA | | 4 |
| BOOT source current | | | | 100 | mA | | 4 |
| VSENSE source current | | | | 10 | μA | | 4 |
| PH source current | | | | 6 | A | | 4 |
| VIN source current | | | | 6 | A | | 4 |
| COMP sink current | | | | 100 | μA | | 4 |
| SS sink current | | | | 200 | μA | | 4 |
| Operating junction temperature (absolute maximum) | TJ | -40 | | 150 | °C | | 4 |
| Storage temperature | | -65 | | 150 | °C | | 4 |
| Operating input voltage (VIN pin) | VIN | 3.5 | | 28 | V | | 4 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Voltage reference | | 0.772 | 0.8 | 0.828 | V | | 5 |
| High-side MOSFET on resistance | RDS(on) | | 115 | 200 | mΩ | BOOT-PH = 3 V, VIN = 3.5 V | 5 |
| High-side MOSFET on resistance | RDS(on) | | 80 | 150 | mΩ | BOOT-PH = 6 V, VIN = 12 V | 5 |
| Error amplifier source/sink current | | -7 | | 7 | μA | V(COMP) = 1 V, 100 mV overdrive | 5 |
| Current limit threshold | | 2.3 | | 3.5 | A | VIN = 12 V | 5 |
| Minimum controllable on time | | 105 | | 130 | ns | VIN = 12 V, 25°C | 5 |
| Device switching frequency | fsw | 210 | 300 | 390 | kHz | VIN = 12 V | 5 |
| Maximum controllable duty ratio | | 90 | | 93 | % | BOOT-PH = 6 V | 5 |
| Shutdown supply current | | | 1 | 4 | μA | EN = 0 V, VIN = 12 V, –40°C to 85°C | 5 |
| Operating non-switching supply current | | | 75 | 110 | μA | VSENSE = 0.85 V | 5 |
| Enable threshold | | | 1.25 | 1.35 | V | Rising and Falling | 5 |
| Internal undervoltage lockout threshold | | | 3.5 | | V | Rising and Falling | 5 |
| Input current at enable threshold − 50 mV | | | -1 | | μA | Enable threshold − 50 mV | 5 |
| Input current at enable threshold + 50 mV | | | -4 | | μA | Enable threshold + 50 mV | 5 |
| Error amplifier transconductance (gm) | gm | | 92 | | μmhos | –2 μA < I(COMP) < 2 μA, V(COMP) = 1 V | 5 |
| Error amplifier DC gain | | | 800 | | V/V | VSENSE = 0.8 V | 5 |
| Error amplifier unity gain bandwidth | | | 2.7 | | MHz | 5 pF capacitance from COMP to GND pins | 5 |
| Switch current to COMP transconductance | | | 9 | | A/V | VIN = 12 V | 5 |
| Pulse skipping Eco-mode switch current threshold | | | 100 | | mA | | 5 |
| Thermal shutdown | | | 165 | | °C | | 5 |
| Slow start charge current | | | 2 | | μA | V(SS) = 0.4 V | 5 |
| SS to VSENSE matching | | | 10 | | mV | V(SS) = 0.4 V | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 116.7 | | °C/W | D package, 8 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 62.4 | | °C/W | D package, 8 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 57 | | °C/W | D package, 8 pins | 4 |
| Junction-to-top characterization parameter | ψJT | | 14.5 | | °C/W | D package, 8 pins | 4 |
| Junction-to-board characterization parameter | ψJB | | 56.5 | | °C/W | D package, 8 pins | 4 |
## CAD (KiCad official)
- Symbol: `TPS54233DR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `tps54233dr-etched.step` / `tps54233dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps54233dr.step` / `tps54233dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps54233.pdf) (33 pp, sha256 `82b6671a411fda8e`, retrieved 2026-09-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps54233dr-datasheet.pdf)