main
Ray
tps54160adgqr: specified limits as data (metadata.characteristics, 60 rows from the datasheet)
729ecea
TPS54160ADGQR
Texas Instruments · DC-DC Converters · MSOP-10-EP
TPS54160ADGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap capacitor pin; 0.1μF ceramic capacitor required between BOOT and PH with voltage 0V to 73V for high-side MOSFET gate drive. |
| 2 | VIN | power_in | Input supply voltage 3.5V to 60V operating range (absolute maximum 65V) with required ceramic X5R/X7R bypass capacitor. |
| 3 | EN | input | Enable pin with 1.25V typical threshold; pull below 1.2V to disable or float to enable; external resistors adjust input voltage undervoltage lockout. |
| 4 | SS/TR | bidirectional | Slow-start and tracking pin with 2μA charge current and 112μA discharge current for controlling output voltage rise time and ratiometric power supply sequencing. |
| 5 | RT/CLK | input | Resistor timing and external clock input; resistor to ground sets switching frequency 100kHz to 2500kHz or pull above 2.2V threshold for PLL synchronization. |
| 6 | PWRGD | tri_state | Open drain power good output with 50Ω on-resistance; asserts low when output falls below 92% or exceeds 109% of nominal internal reference voltage. |
| 7 | VSENSE | input | Inverting input of transconductance error amplifier for closed-loop output voltage regulation with voltage range -0.3V to 3V. |
| 8 | COMP | output | Error amplifier output and switch current comparator input with voltage range -0.3V to 3V; connect frequency compensation network to this pin. |
| 9 | GND | power_in | Ground reference providing electrical connection to PCB ground plane and exposed thermal pad for proper circuit operation. |
| 10 | PH | output | High-side MOSFET source output switching node with voltage range -0.6V to 65V; connect to catch diode cathode and output filter inductor. |
| 11 | Thermal Pad | power_in | Exposed thermal pad for GND connection; must be soldered to PCB ground plane via multiple vias for proper thermal management and operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Power Management (PMIC) |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN | VIN | -0.3 | 65 | V | Over operating temperature range | 5 | |
| Enable pin voltage | EN | -0.3 | 5 | V | Over operating temperature range | 5 | |
| Boot voltage | BOOT | 73 | V | Over operating temperature range | 5 | ||
| VSENSE voltage | VSENSE | -0.3 | 3 | V | Over operating temperature range | 5 | |
| COMP voltage | COMP | -0.3 | 3 | V | Over operating temperature range | 5 | |
| PWRGD voltage | PWRGD | -0.3 | 6 | V | Over operating temperature range | 5 | |
| SS/TR voltage | SS/TR | -0.3 | 3 | V | Over operating temperature range | 5 | |
| RT/CLK voltage | RT/CLK | -0.3 | 3.6 | V | Over operating temperature range | 5 | |
| BOOT-PH voltage | BOOT-PH | 8 | V | Over operating temperature range | 5 | ||
| Output voltage PH | PH | -0.6 | 65 | V | Over operating temperature range | 5 | |
| PH transient voltage | PH | -2 | 65 | V | 10-ns transient | 5 | |
| Voltage difference PAD to GND | -200 | 200 | mV | 5 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Supply input voltage range | VIN | 3.5 | 60 | V | Over operating free-air temperature range | 6 | |
| Output voltage range | VO | 0.8 | 58 | V | Over operating free-air temperature range | 6 | |
| Output current range | IO | 0 | 1.5 | A | Over operating free-air temperature range | 6 | |
| Junction temperature | TJ | -40 | 150 | °C | Over operating free-air temperature range | 6 | |
| Operating input voltage | 3.5 | 60 | V | 6 | |||
| Shutdown supply current | 1.3 | 4 | μA | EN = 0 V, 25°C, 3.5 V ≤ VIN ≤ 60 V | 6 | ||
| Operating nonswitching supply current | 116 | 136 | μA | VSENSE = 0.83 V, VIN = 12 V, 25°C | 6 | ||
| Enable threshold voltage (TPS54160A) | 1.11 | 1.25 | 1.36 | V | No voltage hysteresis, rising and falling | 6 | |
| Hysteresis current | 1.91 | 2.95 | 3.99 | μA | 6 | ||
| Voltage reference | 0.792 | 0.8 | 0.808 | V | TJ = 25°C | 6 | |
| Voltage reference | 0.784 | 0.8 | 0.816 | V | 6 | ||
| On-resistance (high-side MOSFET) | 200 | 410 | mΩ | VIN = 12 V, BOOT-PH = 6 V | 6 | ||
| Error amplifier dc gain | 10000 | V/V | V(VSENSE) = 0.8 V | 6 | |||
| Error amplifier source/sink current | -7 | 7 | μA | V(COMP) = 1 V, 100-mV overdrive | 6 | ||
| Current limit threshold | 1.8 | 2.7 | A | VIN = 12 V, TJ = 25°C | 7 | ||
| Switching frequency range using RT mode | fSW | 100 | 2500 | kHz | 7 | ||
| Switching frequency | fSW | 450 | 581 | 720 | kHz | RT = 200 kΩ | 7 |
| Switching frequency range using CLK mode | fSW | 300 | 2200 | kHz | 7 | ||
| RT/CLK high threshold | 1.9 | 2.2 | V | 7 | |||
| RT/CLK low threshold | 0.5 | 0.7 | V | 7 | |||
| Minimum vin for defined output (PWRGD) | 0.95 | 1.5 | V | V(PWRGD) < 0.5 V, I(PWRGD) = 100 μA | 7 | ||
| Input current (Enable threshold +50 mV) | -3.8 | μA | Enable threshold +50 mV | 6 | |||
| Input current (Enable threshold -50 mV) | -0.9 | μA | Enable threshold -50 mV | 6 | |||
| On-resistance (high-side MOSFET) | 300 | mΩ | VIN = 3.5 V, BOOT-PH = 3 V | 6 | |||
| Error amplifier input current | 50 | nA | 6 | ||||
| Error amplifier transconductance (gM) | 97 | μMhos | -2 μA < I(COMP) < 2 μA, V(COMP) = 1 V | 6 | |||
| Error amplifier transconductance (gM) during slow start | 26 | μMhos | -2 μA < I(COMP) < 2 μA, V(COMP) = 1 V, during slow start, V(VSENSE) = 0.4 V | 6 | |||
| Error amplifier bandwidth | 2700 | kHz | 6 | ||||
| COMP to switch current transconductance | 6 | A/V | 6 | ||||
| Thermal shutdown | 182 | °C | 7 | ||||
| Minimum CLK input pulse width | 40 | ns | 7 | ||||
| SS/TR charge current | 2 | μA | VSS/TR = 0.4 V | 7 | |||
| SS/TR-to-VSENSE matching | 45 | mV | VSS/TR = 0.4 V | 7 | |||
| SS/TR-to-reference crossover | 1 | V | 98% nominal | 7 | |||
| SS/TR discharge current (overload) | 112 | μA | VSENSE = 0 V, V(SS/TR) = 0.4 V | 7 | |||
| PWRGD VSENSE threshold | VSENSE | 92 | % | VSENSE falling | 7 | ||
| PWRGD VSENSE threshold | VSENSE | 94 | % | VSENSE rising | 7 | ||
| PWRGD VSENSE threshold | VSENSE | 109 | % | VSENSE rising | 7 | ||
| PWRGD VSENSE threshold | VSENSE | 107 | % | VSENSE falling | 7 | ||
| PWRGD hysteresis | 2 | % | VSENSE falling | 7 | |||
| PWRGD on resistance | 50 | Ω | I(PWRGD) = 3 mA, VSENSE < 0.79 V | 7 | |||
| Junction-to-ambient thermal resistance (standard board) | θJA | 62.5 | °C/W | DGQ (10 pins), standard board | 6 | ||
| Junction-to-case (top) thermal resistance | θJCtop | 83 | °C/W | DGQ (10 pins) | 6 | ||
| Junction-to-board thermal resistance | θJB | 28 | °C/W | DGQ (10 pins) | 6 | ||
| Junction-to-top characterization parameter | ψJT | 1.7 | °C/W | DGQ (10 pins) | 6 | ||
| Junction-to-board characterization parameter | ψJB | 20.1 | °C/W | DGQ (10 pins) | 6 | ||
| Junction-to-case (bottom) thermal resistance | θJCbot | 21 | °C/W | DGQ (10 pins) | 6 |
CAD (KiCad official)
- Symbol:
TPS54160ADGQR - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
tps54160adgqr-etched.step/tps54160adgqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54160adgqr.step/tps54160adgqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (61 pp, sha256
d7b6a95c275eefaf, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS54160ADGQR
**Texas Instruments** · DC-DC Converters · MSOP-10-EP
TPS54160ADGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap capacitor pin; 0.1μF ceramic capacitor required between BOOT and PH with voltage 0V to 73V for high-side MOSFET gate drive. |
| 2 | VIN | power_in | Input supply voltage 3.5V to 60V operating range (absolute maximum 65V) with required ceramic X5R/X7R bypass capacitor. |
| 3 | EN | input | Enable pin with 1.25V typical threshold; pull below 1.2V to disable or float to enable; external resistors adjust input voltage undervoltage lockout. |
| 4 | SS/TR | bidirectional | Slow-start and tracking pin with 2μA charge current and 112μA discharge current for controlling output voltage rise time and ratiometric power supply sequencing. |
| 5 | RT/CLK | input | Resistor timing and external clock input; resistor to ground sets switching frequency 100kHz to 2500kHz or pull above 2.2V threshold for PLL synchronization. |
| 6 | PWRGD | tri_state | Open drain power good output with 50Ω on-resistance; asserts low when output falls below 92% or exceeds 109% of nominal internal reference voltage. |
| 7 | VSENSE | input | Inverting input of transconductance error amplifier for closed-loop output voltage regulation with voltage range -0.3V to 3V. |
| 8 | COMP | output | Error amplifier output and switch current comparator input with voltage range -0.3V to 3V; connect frequency compensation network to this pin. |
| 9 | GND | power_in | Ground reference providing electrical connection to PCB ground plane and exposed thermal pad for proper circuit operation. |
| 10 | PH | output | High-side MOSFET source output switching node with voltage range -0.6V to 65V; connect to catch diode cathode and output filter inductor. |
| 11 | Thermal Pad | power_in | Exposed thermal pad for GND connection; must be soldered to PCB ground plane via multiple vias for proper thermal management and operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Power Management (PMIC) |
| Pins | 11 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN | VIN | -0.3 | | 65 | V | Over operating temperature range | 5 |
| Enable pin voltage | EN | -0.3 | | 5 | V | Over operating temperature range | 5 |
| Boot voltage | BOOT | | | 73 | V | Over operating temperature range | 5 |
| VSENSE voltage | VSENSE | -0.3 | | 3 | V | Over operating temperature range | 5 |
| COMP voltage | COMP | -0.3 | | 3 | V | Over operating temperature range | 5 |
| PWRGD voltage | PWRGD | -0.3 | | 6 | V | Over operating temperature range | 5 |
| SS/TR voltage | SS/TR | -0.3 | | 3 | V | Over operating temperature range | 5 |
| RT/CLK voltage | RT/CLK | -0.3 | | 3.6 | V | Over operating temperature range | 5 |
| BOOT-PH voltage | BOOT-PH | | | 8 | V | Over operating temperature range | 5 |
| Output voltage PH | PH | -0.6 | | 65 | V | Over operating temperature range | 5 |
| PH transient voltage | PH | -2 | | 65 | V | 10-ns transient | 5 |
| Voltage difference PAD to GND | | -200 | | 200 | mV | | 5 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 5 |
| Supply input voltage range | VIN | 3.5 | | 60 | V | Over operating free-air temperature range | 6 |
| Output voltage range | VO | 0.8 | | 58 | V | Over operating free-air temperature range | 6 |
| Output current range | IO | 0 | | 1.5 | A | Over operating free-air temperature range | 6 |
| Junction temperature | TJ | -40 | | 150 | °C | Over operating free-air temperature range | 6 |
| Operating input voltage | | 3.5 | | 60 | V | | 6 |
| Shutdown supply current | | | 1.3 | 4 | μA | EN = 0 V, 25°C, 3.5 V ≤ VIN ≤ 60 V | 6 |
| Operating nonswitching supply current | | | 116 | 136 | μA | VSENSE = 0.83 V, VIN = 12 V, 25°C | 6 |
| Enable threshold voltage (TPS54160A) | | 1.11 | 1.25 | 1.36 | V | No voltage hysteresis, rising and falling | 6 |
| Hysteresis current | | 1.91 | 2.95 | 3.99 | μA | | 6 |
| Voltage reference | | 0.792 | 0.8 | 0.808 | V | TJ = 25°C | 6 |
| Voltage reference | | 0.784 | 0.8 | 0.816 | V | | 6 |
| On-resistance (high-side MOSFET) | | | 200 | 410 | mΩ | VIN = 12 V, BOOT-PH = 6 V | 6 |
| Error amplifier dc gain | | | 10000 | | V/V | V(VSENSE) = 0.8 V | 6 |
| Error amplifier source/sink current | | -7 | | 7 | μA | V(COMP) = 1 V, 100-mV overdrive | 6 |
| Current limit threshold | | 1.8 | | 2.7 | A | VIN = 12 V, TJ = 25°C | 7 |
| Switching frequency range using RT mode | fSW | 100 | | 2500 | kHz | | 7 |
| Switching frequency | fSW | 450 | 581 | 720 | kHz | RT = 200 kΩ | 7 |
| Switching frequency range using CLK mode | fSW | 300 | | 2200 | kHz | | 7 |
| RT/CLK high threshold | | 1.9 | | 2.2 | V | | 7 |
| RT/CLK low threshold | | 0.5 | | 0.7 | V | | 7 |
| Minimum vin for defined output (PWRGD) | | | 0.95 | 1.5 | V | V(PWRGD) < 0.5 V, I(PWRGD) = 100 μA | 7 |
| Input current (Enable threshold +50 mV) | | | -3.8 | | μA | Enable threshold +50 mV | 6 |
| Input current (Enable threshold -50 mV) | | | -0.9 | | μA | Enable threshold -50 mV | 6 |
| On-resistance (high-side MOSFET) | | | 300 | | mΩ | VIN = 3.5 V, BOOT-PH = 3 V | 6 |
| Error amplifier input current | | | 50 | | nA | | 6 |
| Error amplifier transconductance (gM) | | | 97 | | μMhos | -2 μA < I(COMP) < 2 μA, V(COMP) = 1 V | 6 |
| Error amplifier transconductance (gM) during slow start | | | 26 | | μMhos | -2 μA < I(COMP) < 2 μA, V(COMP) = 1 V, during slow start, V(VSENSE) = 0.4 V | 6 |
| Error amplifier bandwidth | | | 2700 | | kHz | | 6 |
| COMP to switch current transconductance | | | 6 | | A/V | | 6 |
| Thermal shutdown | | | 182 | | °C | | 7 |
| Minimum CLK input pulse width | | | 40 | | ns | | 7 |
| SS/TR charge current | | | 2 | | μA | VSS/TR = 0.4 V | 7 |
| SS/TR-to-VSENSE matching | | | 45 | | mV | VSS/TR = 0.4 V | 7 |
| SS/TR-to-reference crossover | | | 1 | | V | 98% nominal | 7 |
| SS/TR discharge current (overload) | | | 112 | | μA | VSENSE = 0 V, V(SS/TR) = 0.4 V | 7 |
| PWRGD VSENSE threshold | VSENSE | | 92 | | % | VSENSE falling | 7 |
| PWRGD VSENSE threshold | VSENSE | | 94 | | % | VSENSE rising | 7 |
| PWRGD VSENSE threshold | VSENSE | | 109 | | % | VSENSE rising | 7 |
| PWRGD VSENSE threshold | VSENSE | | 107 | | % | VSENSE falling | 7 |
| PWRGD hysteresis | | | 2 | | % | VSENSE falling | 7 |
| PWRGD on resistance | | | 50 | | Ω | I(PWRGD) = 3 mA, VSENSE < 0.79 V | 7 |
| Junction-to-ambient thermal resistance (standard board) | θJA | | 62.5 | | °C/W | DGQ (10 pins), standard board | 6 |
| Junction-to-case (top) thermal resistance | θJCtop | | 83 | | °C/W | DGQ (10 pins) | 6 |
| Junction-to-board thermal resistance | θJB | | 28 | | °C/W | DGQ (10 pins) | 6 |
| Junction-to-top characterization parameter | ψJT | | 1.7 | | °C/W | DGQ (10 pins) | 6 |
| Junction-to-board characterization parameter | ψJB | | 20.1 | | °C/W | DGQ (10 pins) | 6 |
| Junction-to-case (bottom) thermal resistance | θJCbot | | 21 | | °C/W | DGQ (10 pins) | 6 |
## CAD (KiCad official)
- Symbol: `TPS54160ADGQR`
- Footprint: `Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm`
- 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files: `tps54160adgqr-etched.step` / `tps54160adgqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps54160adgqr.step` / `tps54160adgqr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps54160a) (61 pp, sha256 `d7b6a95c275eefaf`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps54160adgqr-datasheet.pdf)