main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps54160adgqr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps54160adgqr: viewers · Ray
package.json tps54160adgqr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps54160adgqr: specified limits as data (metadata.characteristics, 60 rows from the datasheet) · Ray
README.md tps54160adgqr: specified limits as data (metadata.characteristics, 60 rows from the datasheet) · Ray
tps54160adgqr-etched.fit.json tps54160adgqr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54160adgqr-etched.glb tps54160adgqr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54160adgqr-etched.step tps54160adgqr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps54160adgqr.glb Publish 0.1.0 · Ray
tps54160adgqr.kicad_mod Publish 0.1.0 · Ray
tps54160adgqr.kicad_sym Publish 0.1.0 · Ray
tps54160adgqr.lbr Publish 0.1.0 · Ray
tps54160adgqr.step Publish 0.1.0 · Ray

TPS54160ADGQR

Texas Instruments · DC-DC Converters · MSOP-10-EP

TPS54160ADGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT output Bootstrap capacitor pin; 0.1μF ceramic capacitor required between BOOT and PH with voltage 0V to 73V for high-side MOSFET gate drive.
2 VIN power_in Input supply voltage 3.5V to 60V operating range (absolute maximum 65V) with required ceramic X5R/X7R bypass capacitor.
3 EN input Enable pin with 1.25V typical threshold; pull below 1.2V to disable or float to enable; external resistors adjust input voltage undervoltage lockout.
4 SS/TR bidirectional Slow-start and tracking pin with 2μA charge current and 112μA discharge current for controlling output voltage rise time and ratiometric power supply sequencing.
5 RT/CLK input Resistor timing and external clock input; resistor to ground sets switching frequency 100kHz to 2500kHz or pull above 2.2V threshold for PLL synchronization.
6 PWRGD tri_state Open drain power good output with 50Ω on-resistance; asserts low when output falls below 92% or exceeds 109% of nominal internal reference voltage.
7 VSENSE input Inverting input of transconductance error amplifier for closed-loop output voltage regulation with voltage range -0.3V to 3V.
8 COMP output Error amplifier output and switch current comparator input with voltage range -0.3V to 3V; connect frequency compensation network to this pin.
9 GND power_in Ground reference providing electrical connection to PCB ground plane and exposed thermal pad for proper circuit operation.
10 PH output High-side MOSFET source output switching node with voltage range -0.6V to 65V; connect to catch diode cathode and output filter inductor.
11 Thermal Pad power_in Exposed thermal pad for GND connection; must be soldered to PCB ground plane via multiple vias for proper thermal management and operation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10-EP
Category Power Management (PMIC)
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN VIN -0.3 65 V Over operating temperature range 5
Enable pin voltage EN -0.3 5 V Over operating temperature range 5
Boot voltage BOOT 73 V Over operating temperature range 5
VSENSE voltage VSENSE -0.3 3 V Over operating temperature range 5
COMP voltage COMP -0.3 3 V Over operating temperature range 5
PWRGD voltage PWRGD -0.3 6 V Over operating temperature range 5
SS/TR voltage SS/TR -0.3 3 V Over operating temperature range 5
RT/CLK voltage RT/CLK -0.3 3.6 V Over operating temperature range 5
BOOT-PH voltage BOOT-PH 8 V Over operating temperature range 5
Output voltage PH PH -0.6 65 V Over operating temperature range 5
PH transient voltage PH -2 65 V 10-ns transient 5
Voltage difference PAD to GND -200 200 mV 5
Operating junction temperature TJ -40 150 °C 5
Supply input voltage range VIN 3.5 60 V Over operating free-air temperature range 6
Output voltage range VO 0.8 58 V Over operating free-air temperature range 6
Output current range IO 0 1.5 A Over operating free-air temperature range 6
Junction temperature TJ -40 150 °C Over operating free-air temperature range 6
Operating input voltage 3.5 60 V 6
Shutdown supply current 1.3 4 μA EN = 0 V, 25°C, 3.5 V ≤ VIN ≤ 60 V 6
Operating nonswitching supply current 116 136 μA VSENSE = 0.83 V, VIN = 12 V, 25°C 6
Enable threshold voltage (TPS54160A) 1.11 1.25 1.36 V No voltage hysteresis, rising and falling 6
Hysteresis current 1.91 2.95 3.99 μA 6
Voltage reference 0.792 0.8 0.808 V TJ = 25°C 6
Voltage reference 0.784 0.8 0.816 V 6
On-resistance (high-side MOSFET) 200 410 mΩ VIN = 12 V, BOOT-PH = 6 V 6
Error amplifier dc gain 10000 V/V V(VSENSE) = 0.8 V 6
Error amplifier source/sink current -7 7 μA V(COMP) = 1 V, 100-mV overdrive 6
Current limit threshold 1.8 2.7 A VIN = 12 V, TJ = 25°C 7
Switching frequency range using RT mode fSW 100 2500 kHz 7
Switching frequency fSW 450 581 720 kHz RT = 200 kΩ 7
Switching frequency range using CLK mode fSW 300 2200 kHz 7
RT/CLK high threshold 1.9 2.2 V 7
RT/CLK low threshold 0.5 0.7 V 7
Minimum vin for defined output (PWRGD) 0.95 1.5 V V(PWRGD) < 0.5 V, I(PWRGD) = 100 μA 7
Input current (Enable threshold +50 mV) -3.8 μA Enable threshold +50 mV 6
Input current (Enable threshold -50 mV) -0.9 μA Enable threshold -50 mV 6
On-resistance (high-side MOSFET) 300 mΩ VIN = 3.5 V, BOOT-PH = 3 V 6
Error amplifier input current 50 nA 6
Error amplifier transconductance (gM) 97 μMhos -2 μA < I(COMP) < 2 μA, V(COMP) = 1 V 6
Error amplifier transconductance (gM) during slow start 26 μMhos -2 μA < I(COMP) < 2 μA, V(COMP) = 1 V, during slow start, V(VSENSE) = 0.4 V 6
Error amplifier bandwidth 2700 kHz 6
COMP to switch current transconductance 6 A/V 6
Thermal shutdown 182 °C 7
Minimum CLK input pulse width 40 ns 7
SS/TR charge current 2 μA VSS/TR = 0.4 V 7
SS/TR-to-VSENSE matching 45 mV VSS/TR = 0.4 V 7
SS/TR-to-reference crossover 1 V 98% nominal 7
SS/TR discharge current (overload) 112 μA VSENSE = 0 V, V(SS/TR) = 0.4 V 7
PWRGD VSENSE threshold VSENSE 92 % VSENSE falling 7
PWRGD VSENSE threshold VSENSE 94 % VSENSE rising 7
PWRGD VSENSE threshold VSENSE 109 % VSENSE rising 7
PWRGD VSENSE threshold VSENSE 107 % VSENSE falling 7
PWRGD hysteresis 2 % VSENSE falling 7
PWRGD on resistance 50 Ω I(PWRGD) = 3 mA, VSENSE < 0.79 V 7
Junction-to-ambient thermal resistance (standard board) θJA 62.5 °C/W DGQ (10 pins), standard board 6
Junction-to-case (top) thermal resistance θJCtop 83 °C/W DGQ (10 pins) 6
Junction-to-board thermal resistance θJB 28 °C/W DGQ (10 pins) 6
Junction-to-top characterization parameter ψJT 1.7 °C/W DGQ (10 pins) 6
Junction-to-board characterization parameter ψJB 20.1 °C/W DGQ (10 pins) 6
Junction-to-case (bottom) thermal resistance θJCbot 21 °C/W DGQ (10 pins) 6

CAD (KiCad official)

  • Symbol: TPS54160ADGQR
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: tps54160adgqr-etched.step / tps54160adgqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54160adgqr.step / tps54160adgqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (61 pp, sha256 d7b6a95c275eefaf, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF