main
History Download
Ray tps54140adgqr: specified limits as data (metadata.characteristics, 58 rows from the datasheet) 1eec6a7

TPS54140ADGQR

Texas Instruments · DC-DC Converters · MSOP-10-EP

TPS54140ADGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT output Bootstrap capacitor node requiring 0.1 μF capacitor to PH pin for high-side gate driver supply from internal regulator.
2 VIN power_in Input supply voltage with operating range of 3.5 V to 42 V.
3 EN input Enable pin with internal pull-up; pull below 1.2 V to disable or float to enable, with adjustable UVLO voltage via external resistors.
4 SS/TR bidirectional Slow-start and tracking pin where external capacitor sets output rise time and voltage overrides internal reference for power sequencing.
5 RT/CLK input Timing resistor or external clock input; internal amplifier maintains fixed voltage for frequency setting or acts as PLL synchronization input.
6 PWRGD output Open-drain power-good output asserts low when output voltage is low due to thermal shutdown, dropout, over-voltage, or EN shutdown.
7 VSENSE input Inverting input of transconductance error amplifier connected to output feedback voltage divider.
8 COMP output Error amplifier output for connection of frequency compensation components.
9 GND power_in Ground reference and connection point to exposed thermal pad on PCB.
10 PH output Source of internal high-side power MOSFET serving as switching node connected to output inductor and catch diode.
11 Thermal Pad passive Exposed ground pad that must be soldered to PCB for optimal thermal and mechanical performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10-EP
Category Power Management ICs
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (VIN) VIN -0.3 47 V 4
EN EN -0.3 5 V 4
BOOT BOOT 55 V 4
PH-BOOT PH-BOOT 8 V 4
PH PH -0.6 47 V 4
PH 10-ns transient PH -2 47 V 10-ns transient 4
Voltage difference PAD to GND -200 200 mV 4
VSENSE VSENSE -0.3 3 V 4
COMP COMP -0.3 3 V 4
PWRGD PWRGD -0.3 6 V 4
SS/TR SS/TR -0.3 3 V 4
RT/CLK RT/CLK -0.3 3.6 V 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature -65 150 °C 4
Source current BOOT BOOT 100 mA 4
Source current EN EN 100 μA 4
Source current VSENSE VSENSE 10 μA 4
Source current RT/CLK RT/CLK 100 μA 4
Sink current COMP COMP 100 μA 4
Sink current PWRGD PWRGD 10 mA 4
Sink current SS/TR SS/TR 200 μA 4
Supply input voltage range (VIN) VIN 3.5 42 V 5
Output voltage range (VO) VO 0.8 39 V 5
Operating input voltage 3.5 42 V 6
Enable threshold voltage 1.11 1.25 1.36 V No voltage hysteresis, rising and falling 6
Hysteresis current 1.91 2.95 3.99 μA 6
Voltage reference 0.792 0.8 0.808 V TJ = 25°C 6
Voltage reference 0.784 0.8 0.816 V 6
On-resistance (high-side MOSFET) 200 410 mΩ VIN = 12 V, BOOT-PH = 6 V 6
Current limit threshold 1.8 2.7 A VIN = 12 V, TJ = 25°C 6
Error amplifier source/sink current -7 7 μA V(COMP) = 1 V, 100 mV overdrive 6
Switching frequency range (RT mode) fSW 100 2500 kHz RT mode 6
Switching frequency fSW 450 581 720 kHz RT = 200 kΩ 6
Switching frequency range (CLK mode) fSW 300 2200 kHz CLK mode 6
RT/CLK high threshold 1.9 2.2 V 6
RT/CLK low threshold 0.5 0.7 V 6
Minimum VIN for defined output (PWRGD) 0.95 1.5 V V(PWRGD) < 0.5 V, I(PWRGD) = 100 μA 7
Operating nonswitching supply current 116 136 μA VSENSE = 0.83 V, VIN = 12 V, 25°C 6
Shutdown supply current 1.3 4 μA EN = 0 V, 25°C, 3.5 V ≤ VIN ≤ 42 V 6
Internal undervoltage lockout threshold 2.5 V No voltage hysteresis, rising and falling 6
On-resistance (high-side MOSFET) 300 mΩ VIN = 3.5 V, BOOT-PH = 3 V 6
Error amplifier transconductance (gM) gM 97 μS ±2 μA < I(COMP) < 2 μA, V(COMP) = 1 V 6
Error amplifier transconductance (gM) during slow start gM 26 μS ±2 μA < I(COMP) < 2 μA, V(COMP) = 1 V, VSENSE = 0.4 V 6
Error amplifier DC gain 10000 V/V VSENSE = 0.8 V 6
Error amplifier bandwidth 2700 kHz 6
COMP to switch current transconductance 6 A/V 6
Thermal shutdown 182 °C 6
SS/TR charge current 2 μA VSS/TR = 0.4 V 6
SS/TR-to-VSENSE matching 45 mV VSS/TR = 0.4 V 6
SS/TR discharge current (overload) 112 μA VSENSE = 0 V, V(SS/TR) = 0.4 V 7
PWRGD VSENSE threshold (falling) 92 % VSENSE falling 7
PWRGD VSENSE threshold (rising) 94 % VSENSE rising 7
PWRGD VSENSE threshold (rising, OV) 109 % VSENSE rising 7
PWRGD VSENSE threshold (falling, OV) 107 % VSENSE falling 7
Junction-to-ambient thermal resistance (standard board) RθJA 52.3 °C/W DGQ (MSOP), 10 pins, standard board 5
Junction-to-case (top) thermal resistance RθJC(top) 46.3 °C/W DGQ (MSOP), 10 pins 5
Junction-to-board thermal resistance RθJB 33 °C/W DGQ (MSOP), 10 pins 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 5.9 °C/W DGQ (MSOP), 10 pins 5

CAD (KiCad official)

  • Symbol: TPS54140ADGQR
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: tps54140adgqr-etched.step / tps54140adgqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps54140adgqr.step / tps54140adgqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (62 pp, sha256 02f73b94e523a2e4, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF