Generated by kicad-footprint-generator · KiCad file format 20260206
TPS54140ADGQR
Texas Instruments · DC-DC Converters · MSOP-10-EP
TPS54140ADGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap capacitor node requiring 0.1 μF capacitor to PH pin for high-side gate driver supply from internal regulator. |
| 2 | VIN | power_in | Input supply voltage with operating range of 3.5 V to 42 V. |
| 3 | EN | input | Enable pin with internal pull-up; pull below 1.2 V to disable or float to enable, with adjustable UVLO voltage via external resistors. |
| 4 | SS/TR | bidirectional | Slow-start and tracking pin where external capacitor sets output rise time and voltage overrides internal reference for power sequencing. |
| 5 | RT/CLK | input | Timing resistor or external clock input; internal amplifier maintains fixed voltage for frequency setting or acts as PLL synchronization input. |
| 6 | PWRGD | output | Open-drain power-good output asserts low when output voltage is low due to thermal shutdown, dropout, over-voltage, or EN shutdown. |
| 7 | VSENSE | input | Inverting input of transconductance error amplifier connected to output feedback voltage divider. |
| 8 | COMP | output | Error amplifier output for connection of frequency compensation components. |
| 9 | GND | power_in | Ground reference and connection point to exposed thermal pad on PCB. |
| 10 | PH | output | Source of internal high-side power MOSFET serving as switching node connected to output inductor and catch diode. |
| 11 | Thermal Pad | passive | Exposed ground pad that must be soldered to PCB for optimal thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Power Management ICs |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (VIN) | VIN | -0.3 | 47 | V | 4 | ||
| EN | EN | -0.3 | 5 | V | 4 | ||
| BOOT | BOOT | 55 | V | 4 | |||
| PH-BOOT | PH-BOOT | 8 | V | 4 | |||
| PH | PH | -0.6 | 47 | V | 4 | ||
| PH 10-ns transient | PH | -2 | 47 | V | 10-ns transient | 4 | |
| Voltage difference PAD to GND | -200 | 200 | mV | 4 | |||
| VSENSE | VSENSE | -0.3 | 3 | V | 4 | ||
| COMP | COMP | -0.3 | 3 | V | 4 | ||
| PWRGD | PWRGD | -0.3 | 6 | V | 4 | ||
| SS/TR | SS/TR | -0.3 | 3 | V | 4 | ||
| RT/CLK | RT/CLK | -0.3 | 3.6 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | -65 | 150 | °C | 4 | |||
| Source current BOOT | BOOT | 100 | mA | 4 | |||
| Source current EN | EN | 100 | μA | 4 | |||
| Source current VSENSE | VSENSE | 10 | μA | 4 | |||
| Source current RT/CLK | RT/CLK | 100 | μA | 4 | |||
| Sink current COMP | COMP | 100 | μA | 4 | |||
| Sink current PWRGD | PWRGD | 10 | mA | 4 | |||
| Sink current SS/TR | SS/TR | 200 | μA | 4 | |||
| Supply input voltage range (VIN) | VIN | 3.5 | 42 | V | 5 | ||
| Output voltage range (VO) | VO | 0.8 | 39 | V | 5 | ||
| Operating input voltage | 3.5 | 42 | V | 6 | |||
| Enable threshold voltage | 1.11 | 1.25 | 1.36 | V | No voltage hysteresis, rising and falling | 6 | |
| Hysteresis current | 1.91 | 2.95 | 3.99 | μA | 6 | ||
| Voltage reference | 0.792 | 0.8 | 0.808 | V | TJ = 25°C | 6 | |
| Voltage reference | 0.784 | 0.8 | 0.816 | V | 6 | ||
| On-resistance (high-side MOSFET) | 200 | 410 | mΩ | VIN = 12 V, BOOT-PH = 6 V | 6 | ||
| Current limit threshold | 1.8 | 2.7 | A | VIN = 12 V, TJ = 25°C | 6 | ||
| Error amplifier source/sink current | -7 | 7 | μA | V(COMP) = 1 V, 100 mV overdrive | 6 | ||
| Switching frequency range (RT mode) | fSW | 100 | 2500 | kHz | RT mode | 6 | |
| Switching frequency | fSW | 450 | 581 | 720 | kHz | RT = 200 kΩ | 6 |
| Switching frequency range (CLK mode) | fSW | 300 | 2200 | kHz | CLK mode | 6 | |
| RT/CLK high threshold | 1.9 | 2.2 | V | 6 | |||
| RT/CLK low threshold | 0.5 | 0.7 | V | 6 | |||
| Minimum VIN for defined output (PWRGD) | 0.95 | 1.5 | V | V(PWRGD) < 0.5 V, I(PWRGD) = 100 μA | 7 | ||
| Operating nonswitching supply current | 116 | 136 | μA | VSENSE = 0.83 V, VIN = 12 V, 25°C | 6 | ||
| Shutdown supply current | 1.3 | 4 | μA | EN = 0 V, 25°C, 3.5 V ≤ VIN ≤ 42 V | 6 | ||
| Internal undervoltage lockout threshold | 2.5 | V | No voltage hysteresis, rising and falling | 6 | |||
| On-resistance (high-side MOSFET) | 300 | mΩ | VIN = 3.5 V, BOOT-PH = 3 V | 6 | |||
| Error amplifier transconductance (gM) | gM | 97 | μS | ±2 μA < I(COMP) < 2 μA, V(COMP) = 1 V | 6 | ||
| Error amplifier transconductance (gM) during slow start | gM | 26 | μS | ±2 μA < I(COMP) < 2 μA, V(COMP) = 1 V, VSENSE = 0.4 V | 6 | ||
| Error amplifier DC gain | 10000 | V/V | VSENSE = 0.8 V | 6 | |||
| Error amplifier bandwidth | 2700 | kHz | 6 | ||||
| COMP to switch current transconductance | 6 | A/V | 6 | ||||
| Thermal shutdown | 182 | °C | 6 | ||||
| SS/TR charge current | 2 | μA | VSS/TR = 0.4 V | 6 | |||
| SS/TR-to-VSENSE matching | 45 | mV | VSS/TR = 0.4 V | 6 | |||
| SS/TR discharge current (overload) | 112 | μA | VSENSE = 0 V, V(SS/TR) = 0.4 V | 7 | |||
| PWRGD VSENSE threshold (falling) | 92 | % | VSENSE falling | 7 | |||
| PWRGD VSENSE threshold (rising) | 94 | % | VSENSE rising | 7 | |||
| PWRGD VSENSE threshold (rising, OV) | 109 | % | VSENSE rising | 7 | |||
| PWRGD VSENSE threshold (falling, OV) | 107 | % | VSENSE falling | 7 | |||
| Junction-to-ambient thermal resistance (standard board) | RθJA | 52.3 | °C/W | DGQ (MSOP), 10 pins, standard board | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 46.3 | °C/W | DGQ (MSOP), 10 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 33 | °C/W | DGQ (MSOP), 10 pins | 5 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 5.9 | °C/W | DGQ (MSOP), 10 pins | 5 |
CAD (KiCad official)
- Symbol:
TPS54140ADGQR - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
tps54140adgqr-etched.step/tps54140adgqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54140adgqr.step/tps54140adgqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (62 pp, sha256
02f73b94e523a2e4, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).