TPS54062DRBT

{
  "slug": "tps54062drbt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, SON-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps54062drbt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps54062drbt.kicad_sym",
    "tps54062drbt.kicad_mod",
    "tps54062drbt.glb",
    "tps54062drbt.step",
    "tps54062drbt.lbr",
    "docs/hero.png",
    "docs/tps54062drbt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps54062drbt-hero.glb",
    "tps54062drbt-hero.overlay.json",
    "tps54062drbt-etched.glb"
  ],
  "component": {
    "mpn": "TPS54062DRBT",
    "manufacturer": "Texas Instruments",
    "package": "SON-8-EP(3x3)",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps54062.pdf",
    "parts": {
      "symbol": "tps54062drbt.kicad_sym",
      "footprint": "tps54062drbt.kicad_mod",
      "model_3d": "tps54062drbt-hero.glb",
      "model_3d_plain": "tps54062drbt-etched.glb",
      "model_3d_step": "tps54062drbt-etched.step",
      "model_3d_step_plain": "tps54062drbt.step",
      "lbr": "tps54062drbt.lbr"
    },
    "distributor_links": {
      "lcsc": "C2878088",
      "digikey": "296-30078-2-ND",
      "mouser": "595-TPS54062DRBT"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T22:05:15Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-30078-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS54062DRBT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "output",
        "description": "A bootstrap capacitor is required between BOOT and PH, and if its voltage falls below the minimum required by the output device the output is forced off until the capacitor is refreshed."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage, 4.7 V to 60 V."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable pin with internal pull-up current source; pull below 1.14 V to disable and float to enable, and the input undervoltage lockout can be adjusted with two resistors."
      },
      {
        "number": "4",
        "name": "RT/CLK",
        "type": "input",
        "description": "Resistor timing and external clock pin that holds a fixed voltage to set the switching frequency with a resistor to ground, or becomes a high-impedance PLL synchronization input when pulled above the PLL upper threshold."
      },
      {
        "number": "5",
        "name": "VSENSE",
        "type": "input",
        "description": "Inverting input of the transconductance (gm) error amplifier."
      },
      {
        "number": "6",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output and input to the output switch current comparator, where frequency compensation components connect."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "8",
        "name": "PH",
        "type": "output",
        "description": "Source of the internal high-side power MOSFET and drain of the internal low-side MOSFET."
      },
      {
        "number": "9",
        "name": "Thermal Pad",
        "type": "power_in",
        "description": "The GND pin must be electrically connected to the exposed pad on the printed circuit board for proper operation; this pad applies to the VSON-8 package only."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Thermal pad (pin 9) type is not stated in the datasheet table; power_in was assigned because the tex"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0123,
        "at": "2026-11-05T22:05:07"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps54062.pdf",
        "pages": 44,
        "sha256": "6c49a9788f84977e",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps54062drbt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cbee016fb8ee69c44b13d8818fcf65dcf240f5fdca70b22700521eb617c5311a",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps54062drbt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "37336f9e5f5f85443797232c03bf7d903619c33881ca4725cbfbd5a983995892",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}