component
TPS53647RTAR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, WQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+12−9@@ -124,19 +124,19 @@ "number": "13", "name": "VREF", "type": "power_out",- "description": "1.7-V, 500-\u00b5A, LDO reference voltage output; bypass to GND with 0.33 \u00b5F capacitor; connect to REFIN of TI power stages as current-sense reference."+ "description": "1.7-V, 500-µA, LDO reference voltage output; bypass to GND with 0.33 µF capacitor; connect to REFIN of TI power stages as current-sense reference." }, { "number": "14", "name": "V3R3", "type": "power_out",- "description": "3.3-V LDO output from V5; bypass to GND with 1-\u00b5F or larger ceramic capacitor; powers internal digital circuits and provides pull-up source for open-drain outputs."+ "description": "3.3-V LDO output from V5; bypass to GND with 1-µF or larger ceramic capacitor; powers internal digital circuits and provides pull-up source for open-drain outputs." }, { "number": "15", "name": "V5", "type": "power_in",- "description": "5-V power input; bypass to GND with 1-\u00b5F or larger ceramic capacitor; supplies all internal analog circuits; rated 4.5 V to 5.5 V operating range."+ "description": "5-V power input; bypass to GND with 1-µF or larger ceramic capacitor; supplies all internal analog circuits; rated 4.5 V to 5.5 V operating range." }, { "number": "16",@@ -154,13 +154,13 @@ "number": "18", "name": "VR_RDY", "type": "tri_state",- "description": "Power good open-drain output; typically pulled up to V3R3 through 3-k\u03a9 or larger resistor; asserts high when output voltage in regulation within UVP/OVP thresholds."+ "description": "Power good open-drain output; typically pulled up to V3R3 through 3-kΩ or larger resistor; asserts high when output voltage in regulation within UVP/OVP thresholds." }, { "number": "19", "name": "VR_HOT", "type": "tri_state",- "description": "Thermal flag open-drain output, active low; typically pulled up to V3R3 through 3-k\u03a9 or larger resistor; asserts low when sensed temperature exceeds 110\u00b0C default warning threshold."+ "description": "Thermal flag open-drain output, active low; typically pulled up to V3R3 through 3-kΩ or larger resistor; asserts low when sensed temperature exceeds 110°C default warning threshold." }, { "number": "20",@@ -220,7 +220,7 @@ "number": "29", "name": "SLEW-MODE", "type": "input",- "description": "Voltage divider to VREF pin; resistor (RSLEW-MODE) to GND selects output voltage change slew rate (0.34 to 2.74 mV/\u00b5s); voltage sets 4-bit operation mode bits for DAC mode, phase interleaving, dynamic phase shedding, and zero load-line."+ "description": "Voltage divider to VREF pin; resistor (RSLEW-MODE) to GND selects output voltage change slew rate (0.34 to 2.74 mV/µs); voltage sets 4-bit operation mode bits for DAC mode, phase interleaving, dynamic phase shedding, and zero load-line." }, { "number": "30",@@ -238,7 +238,7 @@ "number": "32", "name": "F-IMAX", "type": "input",- "description": "Voltage divider to VREF pin; resistor (RF-IMAX) to GND sets switching frequency from 300 kHz to 1 MHz; voltage sets maximum operating current (IMAX) with 8-bit A/D where IMAX = (VF-IMAX/VREF) \u00d7 256 - 0.5."+ "description": "Voltage divider to VREF pin; resistor (RF-IMAX) to GND sets switching frequency from 300 kHz to 1 MHz; voltage sets maximum operating current (IMAX) with 8-bit A/D where IMAX = (VF-IMAX/VREF) × 256 - 0.5." }, { "number": "33",@@ -286,7 +286,7 @@ "number": "40", "name": "TSEN", "type": "input",- "description": "Temperature sense input; connect to TAO/FAULT pin of TI smart power stages to sense highest die temperature and power stage fault signals; 0\u00b0C to 127.9\u00b0C measurement range."+ "description": "Temperature sense input; connect to TAO/FAULT pin of TI smart power stages to sense highest die temperature and power stage fault signals; 0°C to 127.9°C measurement range." }, { "number": "41",@@ -373,5 +373,8 @@ "docs/tps53647rtar-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }