component
TPS53647RTAR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers And Regulators, WQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+78@@ -0,0 +1,78 @@+# TPS53647RTAR++**Texas Instruments** · AC-DC Controllers And Regulators · WQFN-40-EP(6x6)++TPS53647RTAR from Texas Instruments, in a WQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OCL-R | input | Voltage divider to VREF pin; resistor (ROCL-R) to GND sets per-phase overcurrent limit level and selects ramp amplitude from four options. |+| 2 | IMON | output | Analog current monitor output; resistor to GND generates output voltage proportional to sum of phase currents at 5 mV/A scaling. |+| 3 | CSP1 | input | Positive current sense input for phase 1; connect to IOUT pin of TI smart power stages; tie CSP1 to V3R3 to disable phase 1. |+| 4 | CSP2 | input | Positive current sense input for phase 2; connect to IOUT pin of TI smart power stages; tie CSP2 to V3R3 to disable phase 2. |+| 5 | CSP3 | input | Positive current sense input for phase 3; connect to IOUT pin of TI smart power stages; tie CSP3 to V3R3 to disable phase 3. |+| 6 | CSP4 | input | Positive current sense input for phase 4; connect to IOUT pin of TI smart power stages; tie CSP4 to V3R3 to disable phase 4. |+| 7 | NC | unconnected | No internal connection; leave the pin open or pull up to V3R3 pin. |+| 8 | NC | unconnected | No connection. |+| 9 | VSP | input | Positive input of the remote voltage sense amplifier; connect directly to the output voltage being regulated. |+| 10 | VSN | input | Negative input of the remote voltage sense amplifier; connect directly to GND of the load for accurate output voltage sensing. |+| 11 | COMP | output | Output of the gM error amplifier; resistors and capacitors between this pin and VREF pin set the feedback compensation network. |+| 12 | ISUM | output | Current sum output; resistor (RISUM) to VREF pin determines the load-line droop voltage as function of output current. |+| 13 | VREF | power_out | 1.7-V, 500-µA, LDO reference voltage output; bypass to GND with 0.33 µF capacitor; connect to REFIN of TI power stages as current-sense reference. |+| 14 | V3R3 | power_out | 3.3-V LDO output from V5; bypass to GND with 1-µF or larger ceramic capacitor; powers internal digital circuits and provides pull-up source for open-drain outputs. |+| 15 | V5 | power_in | 5-V power input; bypass to GND with 1-µF or larger ceramic capacitor; supplies all internal analog circuits; rated 4.5 V to 5.5 V operating range. |+| 16 | VIN | power_in | Input voltage supply; also used for input voltage sensing for on-time control and UVLO detection; rated 4.5 V to 17 V operating range. |+| 17 | GND | power_in | Ground pin (IC ground); primary ground reference for all internal circuits. |+| 18 | VR_RDY | tri_state | Power good open-drain output; typically pulled up to V3R3 through 3-kΩ or larger resistor; asserts high when output voltage in regulation within UVP/OVP thresholds. |+| 19 | VR_HOT | tri_state | Thermal flag open-drain output, active low; typically pulled up to V3R3 through 3-kΩ or larger resistor; asserts low when sensed temperature exceeds 110°C default warning threshold. |+| 20 | GND | power_in | Ground pin; connect to GND (noted as not IC ground pin in schematic context). |+| 21 | RESET | input | Reset pin; if low for more than 1000 ns, controller pulls output voltage to VBOOT level for adaptive voltage scaling reset function. |+| 22 | GND | power_in | Ground pin; connect to GND (noted as not IC ground pin in schematic context). |+| 23 | ENABLE | input | VR enable control pin; 1-V I/O level with 100-ns debounce; high enables output, low disables output and enters standby mode. |+| 24 | PMB_CLK | input | I2C PMBus clock input; 3.3-V and 1.8-V logic level compatible; part of PMBus communication protocol supporting 100 kHz and 400 kHz bus speeds. |+| 25 | PMB_ALERT | tri_state | I2C PMBus interrupt line, open-drain output; 3.3-V and 1.8-V logic level compatible; asserts low to alert master of fault condition on PMBus. |+| 26 | PMB_DIO | bidirectional | I2C PMBus digital I/O line; 3.3-V and 1.8-V logic level compatible; used for bidirectional PMBus data transmission and communication protocol. |+| 27 | VR_FAULT | tri_state | VR fault indicator, open-drain output, active low; asserts for input overcurrent, over-temperature, output overvoltage, and power stage faults; typically pulled up to V3R3 or left floating if not used. |+| 28 | ADDR-TRISE | input | Voltage divider to VREF pin; resistor (RADDR-TRISE) to GND sets 3 bits for soft-start slew rate and boot voltage LSB; voltage level sets 4 bits of PMBus address (16 possible). |+| 29 | SLEW-MODE | input | Voltage divider to VREF pin; resistor (RSLEW-MODE) to GND selects output voltage change slew rate (0.34 to 2.74 mV/µs); voltage sets 4-bit operation mode bits for DAC mode, phase interleaving, dynamic phase shedding, and zero load-line. |+| 30 | O-USR | input | Voltage divider to VREF pin; resistor (RO-USR) to GND selects one of 7 OSR (overshoot reduction) thresholds or OFF; voltage sets one of 7 USR (undershoot reduction) levels or OFF for transient improvement. |+| 31 | VBOOT | input | Voltage divider to VREF pin; resistor (RVBOOT) to GND sets bits 3:1 of boot voltage VID; voltage sets bits 7:4, total 7 bits set output voltage at startup from 0.5 V to 2.5 V. |+| 32 | F-IMAX | input | Voltage divider to VREF pin; resistor (RF-IMAX) to GND sets switching frequency from 300 kHz to 1 MHz; voltage sets maximum operating current (IMAX) with 8-bit A/D where IMAX = (VF-IMAX/VREF) × 256 - 0.5. |+| 33 | NC | unconnected | No connection. |+| 34 | NC | unconnected | No connection. |+| 35 | PWM4 | output | PWM signal output for phase 4; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off. |+| 36 | PWM3 | output | PWM signal output for phase 3; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off. |+| 37 | PWM2 | output | PWM signal output for phase 2; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off. |+| 38 | PWM1 | output | PWM signal output for phase 1; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off. |+| 39 | SKIP-NVM | output | SKIP-NVM output pin; resistor (RSKIP-NVM) to GND sets pinstrap or NVM configuration mode; can connect to FCCM pin of TI power stages for SKIP or FCCM operation mode selection. |+| 40 | TSEN | input | Temperature sense input; connect to TAO/FAULT pin of TI smart power stages to sense highest die temperature and power stage fault signals; 0°C to 127.9°C measurement range. |+| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-40-EP(6x6) |+| Category | Power Management (PMIC) |+| Pins | 41 |++## CAD (KiCad official)++- Symbol: `TPS53647RTAR`+- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`+- 3D model: WQFN-40-EP(6x6) (KiCad packages3D, STEP)+- 3D model files: `tps53647rtar-etched.step` / `tps53647rtar-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps53647rtar.step` / `tps53647rtar.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps53647) (123 pp, sha256 `2a0c7fc1d7dab847`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps53647rtar-datasheet.pdf)
page.jsonadded+356@@ -0,0 +1,356 @@+{+ "slug": "tps53647rtar",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments AC-DC Controllers And Regulators, WQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps53647rtar",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps53647rtar.kicad_sym",+ "tps53647rtar.kicad_mod",+ "tps53647rtar.glb",+ "tps53647rtar.step",+ "tps53647rtar.lbr",+ "docs/hero.png",+ "docs/tps53647rtar-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS53647RTAR",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-40-EP(6x6)",+ "pin_count": 41,+ "category": "Power Management (PMIC)",+ "subcategory": "AC-DC Controllers And Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps53647",+ "parts": {+ "symbol": "tps53647rtar.kicad_sym",+ "footprint": "tps53647rtar.kicad_mod",+ "model_3d": "tps53647rtar-etched.glb",+ "model_3d_plain": "tps53647rtar.glb",+ "model_3d_step": "tps53647rtar-etched.step",+ "model_3d_step_plain": "tps53647rtar.step",+ "lbr": "tps53647rtar.lbr"+ },+ "distributor_links": {+ "lcsc": "C2659348",+ "digikey": "296-51986-2-ND",+ "mouser": "595-TPS53647RTAR"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T14:35:57Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-51986-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TPS53647RTAR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OCL-R",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (ROCL-R) to GND sets per-phase overcurrent limit level and selects ramp amplitude from four options."+ },+ {+ "number": "2",+ "name": "IMON",+ "type": "output",+ "description": "Analog current monitor output; resistor to GND generates output voltage proportional to sum of phase currents at 5 mV/A scaling."+ },+ {+ "number": "3",+ "name": "CSP1",+ "type": "input",+ "description": "Positive current sense input for phase 1; connect to IOUT pin of TI smart power stages; tie CSP1 to V3R3 to disable phase 1."+ },+ {+ "number": "4",+ "name": "CSP2",+ "type": "input",+ "description": "Positive current sense input for phase 2; connect to IOUT pin of TI smart power stages; tie CSP2 to V3R3 to disable phase 2."+ },+ {+ "number": "5",+ "name": "CSP3",+ "type": "input",+ "description": "Positive current sense input for phase 3; connect to IOUT pin of TI smart power stages; tie CSP3 to V3R3 to disable phase 3."+ },+ {+ "number": "6",+ "name": "CSP4",+ "type": "input",+ "description": "Positive current sense input for phase 4; connect to IOUT pin of TI smart power stages; tie CSP4 to V3R3 to disable phase 4."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; leave the pin open or pull up to V3R3 pin."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "9",+ "name": "VSP",+ "type": "input",+ "description": "Positive input of the remote voltage sense amplifier; connect directly to the output voltage being regulated."+ },+ {+ "number": "10",+ "name": "VSN",+ "type": "input",+ "description": "Negative input of the remote voltage sense amplifier; connect directly to GND of the load for accurate output voltage sensing."+ },+ {+ "number": "11",+ "name": "COMP",+ "type": "output",+ "description": "Output of the gM error amplifier; resistors and capacitors between this pin and VREF pin set the feedback compensation network."+ },+ {+ "number": "12",+ "name": "ISUM",+ "type": "output",+ "description": "Current sum output; resistor (RISUM) to VREF pin determines the load-line droop voltage as function of output current."+ },+ {+ "number": "13",+ "name": "VREF",+ "type": "power_out",+ "description": "1.7-V, 500-µA, LDO reference voltage output; bypass to GND with 0.33 µF capacitor; connect to REFIN of TI power stages as current-sense reference."+ },+ {+ "number": "14",+ "name": "V3R3",+ "type": "power_out",+ "description": "3.3-V LDO output from V5; bypass to GND with 1-µF or larger ceramic capacitor; powers internal digital circuits and provides pull-up source for open-drain outputs."+ },+ {+ "number": "15",+ "name": "V5",+ "type": "power_in",+ "description": "5-V power input; bypass to GND with 1-µF or larger ceramic capacitor; supplies all internal analog circuits; rated 4.5 V to 5.5 V operating range."+ },+ {+ "number": "16",+ "name": "VIN",+ "type": "power_in",+ "description": "Input voltage supply; also used for input voltage sensing for on-time control and UVLO detection; rated 4.5 V to 17 V operating range."+ },+ {+ "number": "17",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin (IC ground); primary ground reference for all internal circuits."+ },+ {+ "number": "18",+ "name": "VR_RDY",+ "type": "tri_state",+ "description": "Power good open-drain output; typically pulled up to V3R3 through 3-kΩ or larger resistor; asserts high when output voltage in regulation within UVP/OVP thresholds."+ },+ {+ "number": "19",+ "name": "VR_HOT",+ "type": "tri_state",+ "description": "Thermal flag open-drain output, active low; typically pulled up to V3R3 through 3-kΩ or larger resistor; asserts low when sensed temperature exceeds 110°C default warning threshold."+ },+ {+ "number": "20",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin; connect to GND (noted as not IC ground pin in schematic context)."+ },+ {+ "number": "21",+ "name": "RESET",+ "type": "input",+ "description": "Reset pin; if low for more than 1000 ns, controller pulls output voltage to VBOOT level for adaptive voltage scaling reset function."+ },+ {+ "number": "22",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin; connect to GND (noted as not IC ground pin in schematic context)."+ },+ {+ "number": "23",+ "name": "ENABLE",+ "type": "input",+ "description": "VR enable control pin; 1-V I/O level with 100-ns debounce; high enables output, low disables output and enters standby mode."+ },+ {+ "number": "24",+ "name": "PMB_CLK",+ "type": "input",+ "description": "I2C PMBus clock input; 3.3-V and 1.8-V logic level compatible; part of PMBus communication protocol supporting 100 kHz and 400 kHz bus speeds."+ },+ {+ "number": "25",+ "name": "PMB_ALERT",+ "type": "tri_state",+ "description": "I2C PMBus interrupt line, open-drain output; 3.3-V and 1.8-V logic level compatible; asserts low to alert master of fault condition on PMBus."+ },+ {+ "number": "26",+ "name": "PMB_DIO",+ "type": "bidirectional",+ "description": "I2C PMBus digital I/O line; 3.3-V and 1.8-V logic level compatible; used for bidirectional PMBus data transmission and communication protocol."+ },+ {+ "number": "27",+ "name": "VR_FAULT",+ "type": "tri_state",+ "description": "VR fault indicator, open-drain output, active low; asserts for input overcurrent, over-temperature, output overvoltage, and power stage faults; typically pulled up to V3R3 or left floating if not used."+ },+ {+ "number": "28",+ "name": "ADDR-TRISE",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RADDR-TRISE) to GND sets 3 bits for soft-start slew rate and boot voltage LSB; voltage level sets 4 bits of PMBus address (16 possible)."+ },+ {+ "number": "29",+ "name": "SLEW-MODE",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RSLEW-MODE) to GND selects output voltage change slew rate (0.34 to 2.74 mV/µs); voltage sets 4-bit operation mode bits for DAC mode, phase interleaving, dynamic phase shedding, and zero load-line."+ },+ {+ "number": "30",+ "name": "O-USR",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RO-USR) to GND selects one of 7 OSR (overshoot reduction) thresholds or OFF; voltage sets one of 7 USR (undershoot reduction) levels or OFF for transient improvement."+ },+ {+ "number": "31",+ "name": "VBOOT",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RVBOOT) to GND sets bits 3:1 of boot voltage VID; voltage sets bits 7:4, total 7 bits set output voltage at startup from 0.5 V to 2.5 V."+ },+ {+ "number": "32",+ "name": "F-IMAX",+ "type": "input",+ "description": "Voltage divider to VREF pin; resistor (RF-IMAX) to GND sets switching frequency from 300 kHz to 1 MHz; voltage sets maximum operating current (IMAX) with 8-bit A/D where IMAX = (VF-IMAX/VREF) × 256 - 0.5."+ },+ {+ "number": "33",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "34",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "35",+ "name": "PWM4",+ "type": "output",+ "description": "PWM signal output for phase 4; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off."+ },+ {+ "number": "36",+ "name": "PWM3",+ "type": "output",+ "description": "PWM signal output for phase 3; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off."+ },+ {+ "number": "37",+ "name": "PWM2",+ "type": "output",+ "description": "PWM signal output for phase 2; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off."+ },+ {+ "number": "38",+ "name": "PWM1",+ "type": "output",+ "description": "PWM signal output for phase 1; 3.3-V logic output; high turns on high-side MOSFET, low turns on low-side MOSFET, tri-state (1.7 V) for both MOSFETs off."+ },+ {+ "number": "39",+ "name": "SKIP-NVM",+ "type": "output",+ "description": "SKIP-NVM output pin; resistor (RSKIP-NVM) to GND sets pinstrap or NVM configuration mode; can connect to FCCM pin of TI power stages for SKIP or FCCM operation mode selection."+ },+ {+ "number": "40",+ "name": "TSEN",+ "type": "input",+ "description": "Temperature sense input; connect to TAO/FAULT pin of TI smart power stages to sense highest die temperature and power stage fault signals; 0°C to 127.9°C measurement range."+ },+ {+ "number": "41",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Thermal pad (exposed pad on bottom of package) listed as GND in datasheet; should be connected to gr",+ "exposed pad 41 added from the footprint"+ ],+ "pages_sent": 123,+ "cost_usd": 0.9959,+ "at": "2026-09-27T14:35:37"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps53647",+ "pages": 123,+ "sha256": "2a0c7fc1d7dab847",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 41,+ "described": 41,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}