TPS53632RSMR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps53632rsmr",
  "title": "TPS53632RSMR",
  "brief": "Texas Instruments DC-DC Controllers, VQFN-32-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "tps53632rsmr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS53632RSMR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-32-EP(4x4)",
    "pin_count": 33,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps53632",
    "parts": {
      "symbol": "tps53632rsmr.kicad_sym",
      "footprint": "tps53632rsmr.kicad_mod",
      "model_3d": "tps53632rsmr-hero.glb",
      "model_3d_plain": "tps53632rsmr.glb",
      "model_3d_step": "tps53632rsmr-etched.step",
      "model_3d_step_plain": "tps53632rsmr.step",
      "lbr": "tps53632rsmr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2658028",
      "digikey": "296-40780-2-ND",
      "mouser": "595-TPS53632RSMR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T22:54:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-40780-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS53632RSMR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial digital I/O line of the I2C interface; recommended input range is -0.1 V to 3.5 V."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "3.3-V digital power input, recommended supply 3.1 V to 3.5 V, bypass to GND with a capacitor of at least 1 µF."
      },
      {
        "number": "3",
        "name": "PGOOD",
        "type": "output",
        "description": "Power-good output, open-drain; recommended voltage range is -0.1 V to 3.5 V."
      },
      {
        "number": "4",
        "name": "PWM1",
        "type": "output",
        "description": "PWM control for the external driver at 5-V logic level; the controller forces the tri-state level when needed."
      },
      {
        "number": "5",
        "name": "PWM2",
        "type": "output",
        "description": "PWM control for the external driver at 5-V logic level; the controller forces the tri-state level when needed."
      },
      {
        "number": "6",
        "name": "PWM3",
        "type": "output",
        "description": "PWM control for the external driver at 5-V logic level; the controller forces the tri-state level when needed."
      },
      {
        "number": "7",
        "name": "SKIP",
        "type": "output",
        "description": "When high, the driver enters FCCM mode, otherwise DCM mode; driving the tri-state level puts the drivers into a low-power sleep mode."
      },
      {
        "number": "8",
        "name": "EN",
        "type": "input",
        "description": "Enable input with 100-ns de-bounce; the regulator enters low-power mode but retains start-up settings when brought low."
      },
      {
        "number": "9",
        "name": "PU",
        "type": "input",
        "description": "Pull-up to VREF through a 10-kΩ resistor."
      },
      {
        "number": "10",
        "name": "FREQ-P",
        "type": "input",
        "description": "A resistor to GND sets the per-phase switching frequency; a resistor to VREF disables dynamic phase add and drop operation."
      },
      {
        "number": "11",
        "name": "RAMP",
        "type": "input",
        "description": "Voltage divider to VREF with a resistor to GND sets the ramp setting voltage and can override the factory ramp setting."
      },
      {
        "number": "12",
        "name": "OCP-I",
        "type": "bidirectional",
        "description": "Voltage divider to IMON; a resistor to GND (ROCP) selects one of 8 OCP levels per phase, latched at start-up."
      },
      {
        "number": "13",
        "name": "IMON",
        "type": "output",
        "description": "Analog current monitor output following VIMON = ΣVISENSE × (1 + RIMON/ROCP)."
      },
      {
        "number": "14",
        "name": "VINTF",
        "type": "input",
        "description": "Input voltage to the interface logic; voltage can be between 1.62 V and 3.5 V."
      },
      {
        "number": "15",
        "name": "SLEWA",
        "type": "input",
        "description": "Voltage sets the 3 LSBs of the I2C address and resistance to GND selects 1 of 8 slew rates; start-up slew is SLEWRATE/2, with both values latched at start-up."
      },
      {
        "number": "16",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage information for the on-time circuits via a 10-kΩ resistor; must be connected to the conversion input voltage and must not exceed 28 V."
      },
      {
        "number": "17",
        "name": "CSP1",
        "type": "input",
        "description": "Positive current sense input for phase 1; connect to the most positive node of the sense resistor or DCR network, and tie to a 3.3-V supply to disable the phase."
      },
      {
        "number": "18",
        "name": "CSN1",
        "type": "input",
        "description": "Negative current sense input for phase 1 with a secondary OVP comparator and soft-stop pull-down transistor; connect to the most negative sense node."
      },
      {
        "number": "19",
        "name": "CSN2",
        "type": "input",
        "description": "Negative current sense input for phase 2; connect to the most negative node of the sense resistor or DCR network."
      },
      {
        "number": "20",
        "name": "CSP2",
        "type": "input",
        "description": "Positive current sense input for phase 2; connect to the most positive node of the sense resistor or DCR network, and tie to a 3.3-V supply to disable the phase."
      },
      {
        "number": "21",
        "name": "CSP3",
        "type": "input",
        "description": "Positive current sense input for phase 3; connect to the most positive node of the sense resistor or DCR network, and tie to a 3.3-V supply to disable the phase."
      },
      {
        "number": "22",
        "name": "CSN3",
        "type": "input",
        "description": "Negative current sense input for phase 3; connect to the most negative node of the sense resistor or DCR network."
      },
      {
        "number": "23",
        "name": "GFB",
        "type": "input",
        "description": "Voltage sense return; recommended range is -0.1 V to 0.1 V, tie to PCB GND with a 10-Ω resistor when the microprocessor is not populated."
      },
      {
        "number": "24",
        "name": "VFB",
        "type": "input",
        "description": "Voltage sense line tied directly to the processor VOUT sense point, with resistance to GFB greater than 1 MΩ; recommended range is -0.1 V to 3.5 V."
      },
      {
        "number": "25",
        "name": "DROOP",
        "type": "output",
        "description": "Error amplifier output; resistors between DROOP and VREF and between COMP and DROOP set the droop gain ADROOP = 1 + RDROOP / RCOMP."
      },
      {
        "number": "26",
        "name": "COMP",
        "type": "input",
        "description": "Error amplifier summing node; resistors RCOMP (to VREF) and RDROOP (to DROOP) set the droop gain."
      },
      {
        "number": "27",
        "name": "VREF",
        "type": "power_in",
        "description": "1.7-V, 500-µA reference output; bypass to GND with a 0.22-µF ceramic capacitor."
      },
      {
        "number": "28",
        "name": "V5A",
        "type": "power_in",
        "description": "5-V power input for analog circuits, recommended 4.5 V to 5.5 V, connected through a resistor to the 5-V plane and bypassed with at least 1 µF ceramic."
      },
      {
        "number": "29",
        "name": "GND",
        "type": "power_in",
        "description": "Analog circuit reference; tie to a quiet point on the ground plane."
      },
      {
        "number": "30",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "31",
        "name": "SCL",
        "type": "input",
        "description": "Serial digital clock line of the I2C interface; recommended input range is -0.1 V to 3.5 V."
      },
      {
        "number": "32",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad (printed as 'PAD GND', 'Thermal pad: tie to the ground plane with multiple vias') ha; Pages 3 and 4 give the pin table for the RSM (VQFN) 32-pin package, which matches TPS53632RSMR (orde; The output schema has no field for electrical specs, so the headline ratings (for example V5A 4.5-5.",
          "exposed pad 33 added from the footprint"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0874,
        "at": "2026-10-08T22:52:58"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps53632",
        "pages": 42,
        "sha256": "bdf4d8bd7d372ccf",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps53632rsmr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.6
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7b482a511cdf2cf875c31931f9fea7f745b8dac2ea6203531cd6604f40a290cb",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps53632rsmr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.6
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "352d658c33bcebb2ab683536e9216f2124efabe3f4eef4a9ca05a76a5a6656b7",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-32-EP(4x4)",
      "Category": "Power Supply Chip",
      "Pins": "33"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "bdf4d8bd7d372ccf",
      "rows": [
        {
          "name": "Input voltage, PWM3, PWM2, PWM1, SKIP, V5A",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input voltage, VIN",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 30,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input voltage, COMP, CSP1-CSP3, CSN1-CSN3, DROOP, EN, FREQ-P, IMON, OCP-I, O-USR, RAMP, SCL, SDA, SLEWA, VDD, VFB, VINTF, VREF",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "GFB voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.2,
          "typ": null,
          "max": 0.2,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output voltage, PGOOD",
          "symbol": "VO",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Operating junction temperature",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input voltage, CSN1-CSN3, CSP1-CSP3, IMON, OCP-I, O-USR, RAMP, SCL, SDA, VDD, VFB, VINTF, VREF",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "V",
          "min": -0.1,
          "typ": null,
          "max": 3.5,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Input voltage, VIN",
          "symbol": "VIN",
          "kind": "recommended_operating",
          "unit": "V",
          "min": -0.1,
          "typ": null,
          "max": 28,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Input voltage, COMP, DROOP, EN, FREQ-P, PWM3, PWM2, PWM1, SKIP, SLEWA, V5A",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "V",
          "min": -0.1,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output voltage, GFB",
          "symbol": "VO",
          "kind": "recommended_operating",
          "unit": "V",
          "min": -0.1,
          "typ": null,
          "max": 0.1,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output voltage, PGOOD",
          "symbol": "VO",
          "kind": "recommended_operating",
          "unit": "V",
          "min": -0.1,
          "typ": null,
          "max": 3.5,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Operating ambient temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -10,
          "typ": null,
          "max": 105,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-ambient thermal resistance",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 37.2,
          "max": null,
          "conditions": "JEDEC high-K board, natural convection (JESD51-7)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-case (top) thermal resistance",
          "symbol": "θJCtop",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 31.9,
          "max": null,
          "conditions": "Cold plate test on package top",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-board thermal resistance",
          "symbol": "θJB",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 8.1,
          "max": null,
          "conditions": "Ring cold plate fixture (JESD51-8)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-top characterization parameter",
          "symbol": "ψJT",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 0.4,
          "max": null,
          "conditions": "Extracted from JESD51-2a simulation",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-board characterization parameter",
          "symbol": "ψJB",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 7.9,
          "max": null,
          "conditions": "Extracted from JESD51-2a simulation",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-case (bottom) thermal resistance",
          "symbol": "θJCbot",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 2.2,
          "max": null,
          "conditions": "Cold plate test on exposed (power) pad",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "V5A supply current, 3-phase operation",
          "symbol": "IV5-3P",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 3.6,
          "max": 6,
          "conditions": "3-phase operation, VDAC < VVFB < (VDAC + 100 mV), EN = 'HI'",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VDD supply current, 3-phase operation",
          "symbol": "IVDD-3P",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 0.2,
          "max": 0.8,
          "conditions": "3-phase operation, VDAC < VVFB < (VDAC + 100 mV), EN = 'HI', digital buses idle",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "V5A supply current, 1-phase operation",
          "symbol": "IV5-1P",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 3.5,
          "max": 6,
          "conditions": "1-phase operation, VDAC < VVFB < (VDAC + 100 mV), EN = 'HI'",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VDD supply current, 1-phase operation",
          "symbol": "IVDD-1P",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 0.2,
          "max": 0.8,
          "conditions": "1-phase operation, VDAC < VVFB < (VDAC + 100 mV), EN = 'HI', digital buses idle",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "V5A standby current",
          "symbol": "IV5STBY",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 125,
          "max": 200,
          "conditions": "EN = 'LO'",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VDD standby current",
          "symbol": "IVDDSTBY",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 23,
          "max": 40,
          "conditions": "EN = 'LO'",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VINTF supply current",
          "symbol": "IVDD-1P8",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 1.7,
          "max": 5,
          "conditions": "All conditions, digital buses idle",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "V5A UVLO OK threshold",
          "symbol": "VUVLOH",
          "kind": "electrical",
          "unit": "V",
          "min": 4.2,
          "typ": 4.4,
          "max": 4.52,
          "conditions": "VVFB < 200 mV, Ramp up, VVDD > 3 V, EN = 'HI', switching begins",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "V5A UVLO fault threshold",
          "symbol": "VUVLOL",
          "kind": "electrical",
          "unit": "V",
          "min": 4,
          "typ": 4.2,
          "max": 4.35,
          "conditions": "Ramp down, EN = 'HI', VVDD > 3 V, VVFB = 100 mV",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "V5A fault latch reset threshold",
          "symbol": "VPOR",
          "kind": "electrical",
          "unit": "V",
          "min": 1.2,
          "typ": 1.9,
          "max": 2.5,
          "conditions": "Ramp down, EN = 'HI', VVDD > 3 V; can restart if 5-V rises to VUVLOH and no other faults present",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VDD UVLO OK threshold",
          "symbol": "V3UVLOH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.5,
          "typ": 2.8,
          "max": 3,
          "conditions": "VVFB < 200 mV. Ramp up, VV5A > 4.5 V, EN = 'HI', switching begins",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VDD UVLO fault threshold",
          "symbol": "V3UVLOL",
          "kind": "electrical",
          "unit": "V",
          "min": 2.4,
          "typ": 2.6,
          "max": 2.8,
          "conditions": "Ramp down, EN = 'HI', V5A > 4.5 V, VFB = 100 mV",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VDD fault latch reset threshold",
          "symbol": "VPOR",
          "kind": "electrical",
          "unit": "V",
          "min": 1.2,
          "typ": 1.9,
          "max": 2.5,
          "conditions": "Ramp down, EN = 'HI', V5A > 4.5 V; can restart if 5-V supply rises to VUVLOH and no other faults present",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VINTF UVLO OK threshold",
          "symbol": "VINTFUVLOH",
          "kind": "electrical",
          "unit": "V",
          "min": 1.4,
          "typ": 1.5,
          "max": 1.6,
          "conditions": "Ramp up, EN = 'HI', VV5A > 4.5 V, VVFB = 100 mV",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VINTF UVLO falling threshold",
          "symbol": "VINTFUVLOL",
          "kind": "electrical",
          "unit": "V",
          "min": 1.3,
          "typ": 1.4,
          "max": 1.5,
          "conditions": "Ramp down, EN = 'HI', VV5A > 4.5 V, VVFB = 100 mV",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VFB tolerance",
          "symbol": "VDAC1",
          "kind": "tolerance",
          "unit": "mV",
          "min": -9,
          "typ": null,
          "max": 9,
          "conditions": "No load active, 1.36 V ≤ VVFB ≤ 1.52 V, IOUT = 0 A",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VFB tolerance",
          "symbol": "VDAC2",
          "kind": "tolerance",
          "unit": "mV",
          "min": -8,
          "typ": null,
          "max": 8,
          "conditions": "No load medium, 1.0 V ≤ VVFB ≤ 1.35 V, IOUT = 0 A",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VFB tolerance",
          "symbol": "VDAC2",
          "kind": "tolerance",
          "unit": "mV",
          "min": -7,
          "typ": null,
          "max": 7,
          "conditions": "No load medium, 0.5 V ≤ VVFB ≤ 0.99 V, IOUT = 0 A",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VREF output",
          "symbol": "VVREF",
          "kind": "electrical",
          "unit": "V",
          "min": 1.66,
          "typ": 1.7,
          "max": 1.74,
          "conditions": "4.5 V ≤ VV5A ≤ 5.5 V, IVREF = 0 A",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VREF output source",
          "symbol": "VVREFSRC",
          "kind": "tolerance",
          "unit": "mV",
          "min": -4,
          "typ": null,
          "max": -3,
          "conditions": "0 A ≤ IREF ≤ 500 µA, HP-2",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VREF output sink",
          "symbol": "VVREFSNK",
          "kind": "tolerance",
          "unit": "mV",
          "min": 3,
          "typ": null,
          "max": 4,
          "conditions": "-500 A ≤ IREF ≤ 0 A, HP-2",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Internal VFB initial boot voltage",
          "symbol": "VVBOOT",
          "kind": "electrical",
          "unit": "V",
          "min": 0.99,
          "typ": 1,
          "max": 1.01,
          "conditions": "Initial DAC boot voltage",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "GFB differential GND to GFB",
          "symbol": "VDELGND",
          "kind": "tolerance",
          "unit": "mV",
          "min": -100,
          "typ": null,
          "max": 100,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "OCP voltage (valley current limit)",
          "symbol": "VOCPP",
          "kind": "electrical",
          "unit": "mV",
          "min": 3.7,
          "typ": 7.6,
          "max": 11.4,
          "conditions": "ROCP-I = 20 kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "OCP voltage (valley current limit)",
          "symbol": "VOCPP",
          "kind": "electrical",
          "unit": "mV",
          "min": 6.6,
          "typ": 10.5,
          "max": 14.1,
          "conditions": "ROCP-I = 24 kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "OCP voltage (valley current limit)",
          "symbol": "VOCPP",
          "kind": "electrical",
          "unit": "mV",
          "min": 10.6,
          "typ": 14.5,
          "max": 18,
          "conditions": "ROCP-I = 30 kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "OCP voltage (valley current limit)",
          "symbol": "VOCPP",
          "kind": "electrical",
          "unit": "mV",
          "min": 15.4,
          "typ": 19.5,
          "max": 23,
          "conditions": "ROCP-I = 39 kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "OCP voltage (valley current limit)",
          "symbol": "VOCPP",
          "kind": "electrical",
          "unit": "mV",
          "min": 21.3,
          "typ": 25.4,
          "max": 29,
          "conditions": "ROCP-I = 56 kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "OCP voltage (valley current limit)",
          "symbol": "VOCPP",
          "kind": "electrical",
          "unit": "mV",
          "min": 28.4,
          "typ": 32.5,
          "max": 36.2,
          "conditions": "ROCP-I = 75 kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "OCP voltage (valley current limit)",
          "symbol": "VOCPP",
          "kind": "electrical",
          "unit": "mV",
          "min": 36.3,
          "typ": 40.5,
          "max": 44,
          "conditions": "ROCP-I = 100 kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "OCP voltage (valley current limit)",
          "symbol": "VOCPP",
          "kind": "electrical",
          "unit": "mV",
          "min": 45,
          "typ": 49.3,
          "max": 53,
          "conditions": "ROCP-I = 150 kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "CS pin input bias current",
          "symbol": "ICS",
          "kind": "electrical",
          "unit": "nA",
          "min": -500,
          "typ": 0.2,
          "max": 500,
          "conditions": "CSPx and CSNx",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Internal current sense gain",
          "symbol": "ACSINT",
          "kind": "electrical",
          "unit": "V/V",
          "min": 5.8,
          "typ": 6,
          "max": 6.2,
          "conditions": "Gain from CSPx – CSNx to PWM comparator, RSKIP = Open",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Fixed OVP voltage",
          "symbol": "VOVPH",
          "kind": "electrical",
          "unit": "V",
          "min": 1.6,
          "typ": 1.7,
          "max": 1.8,
          "conditions": "VCSN1 > VOVPH for 1 µs",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "PGOOD high threshold",
          "symbol": "VPGDH",
          "kind": "electrical",
          "unit": "mV",
          "min": 190,
          "typ": null,
          "max": 245,
          "conditions": "Measured at the VFB pin w/r/t VID code, device latches OFF",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "PGOOD low threshold",
          "symbol": "VPGDL",
          "kind": "electrical",
          "unit": "mV",
          "min": -348,
          "typ": null,
          "max": -280,
          "conditions": "Measured at the VFB pin w/r/t VID code, device latches OFF",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "PWMx/SKIP output low voltage",
          "symbol": "VP-S_L",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.15,
          "max": 0.3,
          "conditions": "PWMILOAD = ± 1 mA, SKIPILOAD = ± 100 µA",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "PWMx tri-state level",
          "symbol": "VPW-SKLK",
          "kind": "electrical",
          "unit": "V",
          "min": 1.6,
          "typ": 1.7,
          "max": 1.8,
          "conditions": "PWMILOAD = ± 100 µA",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Logic leakage current",
          "symbol": "IVRTTLK",
          "kind": "electrical",
          "unit": "µA",
          "min": -2,
          "typ": 0.2,
          "max": 2,
          "conditions": "VSCL = 1.8 V, VSDA = 1.8 V, VPGOOD = 3.3 V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "I/O leakage, EN",
          "symbol": "IENH",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 24,
          "max": 40,
          "conditions": "VEN = 1.8 V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "VIN resistance",
          "symbol": "RVIN",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 350,
          "typ": null,
          "max": 600,
          "conditions": "EN = HI",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "PGOOD low state time after EN goes low",
          "symbol": "tPG2",
          "kind": "timing",
          "unit": "µs",
          "min": 225,
          "typ": 250,
          "max": 275,
          "conditions": "Low state time after EN goes low",
          "source_page": 8,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps53632rsmr"
  ],
  "discovery_pitch": "TPS53632RSMR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps53632rsmr.kicad_sym",
    "tps53632rsmr.kicad_mod",
    "tps53632rsmr.glb",
    "tps53632rsmr.step",
    "tps53632rsmr.lbr",
    "docs/hero.png",
    "docs/tps53632rsmr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps53632rsmr-hero.glb",
    "tps53632rsmr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}