main
Ray tps53219argtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) bdc68e0
{
  "slug": "tps53219argtr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, QFN-16(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps53219argtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps53219argtr.kicad_sym",
    "tps53219argtr.kicad_mod",
    "tps53219argtr.glb",
    "tps53219argtr.step",
    "tps53219argtr.lbr",
    "docs/hero.png",
    "docs/tps53219argtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS53219ARGTR",
    "manufacturer": "Texas Instruments",
    "package": "QFN-16(3x3)",
    "pin_count": 17,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps53219a.pdf",
    "parts": {
      "symbol": "tps53219argtr.kicad_sym",
      "footprint": "tps53219argtr.kicad_mod",
      "model_3d": "tps53219argtr-etched.glb",
      "model_3d_plain": "tps53219argtr.glb",
      "model_3d_step": "tps53219argtr-etched.step",
      "model_3d_step_plain": "tps53219argtr.step",
      "lbr": "tps53219argtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C544646"
    },
    "pins": [
      {
        "number": "1",
        "name": "TRIP",
        "type": "input",
        "description": "OCL threshold setting pin sourcing 10 µA typical at 25°C with 4700 ppm/°C temperature compensation and 0.2 V to 3 V programmable range."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable pin with enable threshold 1.7-1.8 V and disable threshold 0.5 V, requiring 1-kΩ series resistor if source voltage exceeds 5.5 V."
      },
      {
        "number": "3",
        "name": "VFB",
        "type": "input",
        "description": "Output feedback input connected to output voltage through resistor divider and compared against 0.6 V internal reference with ±0.8% tolerance."
      },
      {
        "number": "4",
        "name": "RF",
        "type": "input",
        "description": "Switching frequency selection pin connected to GND or VREG through resistor for selection of eight preset frequencies from 250 kHz to 970 kHz."
      },
      {
        "number": "5",
        "name": "MODE",
        "type": "input",
        "description": "Soft-start time and operational mode selection pin with four selectable soft-start times from 0.7 ms to 5.6 ms."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input with operating range 4.5 V to 25 V and typical quiescent current of 420-590 µA at no load condition."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground reference pin for internal circuitry, must be connected to GND plane at single point."
      },
      {
        "number": "8",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground pin for gate drivers and MOSFET source connections, connected to GND plane."
      },
      {
        "number": "9",
        "name": "VREG",
        "type": "power_out",
        "description": "6.2 V LDO regulator output providing 5.76-6.67 V over 0-50 mA output current range for internal and gate driver supply."
      },
      {
        "number": "10",
        "name": "VDRV",
        "type": "power_in",
        "description": "Gate drive supply voltage input accepting 4.5 V to 6.5 V from external source or connected to VREG."
      },
      {
        "number": "11",
        "name": "DRVL",
        "type": "output",
        "description": "Low-side MOSFET gate driver output with 0.5-1.2 Ω on-resistance and 10-35 ns dead-time delay to DRVH."
      },
      {
        "number": "12",
        "name": "SW",
        "type": "power_out",
        "description": "Synchronous buck converter output node connecting the drain of low-side MOSFET to high-side MOSFET drain and output inductor."
      },
      {
        "number": "13",
        "name": "DRVH",
        "type": "output",
        "description": "High-side floating MOSFET gate driver output with 0.7-1.8 Ω on-resistance, bootstrap powered between VBST and SW nodes."
      },
      {
        "number": "14",
        "name": "VBST",
        "type": "power_out",
        "description": "Bootstrap supply pin for high-side gate driver with external capacitor connection from VBST to SW node, internally supplied from VREG."
      },
      {
        "number": "15",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection pin."
      },
      {
        "number": "16",
        "name": "PGOOD",
        "type": "tri_state",
        "description": "Open-drain power-good output flag with 1-ms startup delay rising when output within specified voltage band and 2-µs delay falling outside band."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 17 added from the footprint"
        ],
        "pages_sent": 36,
        "cost_usd": 0.3944,
        "at": "2026-09-23T22:35:38"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps53219a.pdf",
        "pages": 36,
        "sha256": "2aee47feccbc24a8",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps53219argtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps53219argtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0746079b2d4f682b4f6d13649b4a63f73eae5037ab7326ee2396d75df41cb162",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}