main
Ray tps51219rter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 332366e
{
  "slug": "tps51219rter",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps51219rter",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps51219rter.kicad_sym",
    "tps51219rter.kicad_mod",
    "tps51219rter.glb",
    "tps51219rter.step",
    "tps51219rter.lbr",
    "docs/hero.png",
    "docs/tps51219rter-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS51219RTER",
    "manufacturer": "Texas Instruments",
    "package": "QFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps51219",
    "parts": {
      "symbol": "tps51219rter.kicad_sym",
      "footprint": "tps51219rter.kicad_mod",
      "model_3d": "tps51219rter-etched.glb",
      "model_3d_plain": "tps51219rter.glb",
      "model_3d_step": "tps51219rter-etched.step",
      "model_3d_step_plain": "tps51219rter.step",
      "lbr": "tps51219rter.lbr"
    },
    "distributor_links": {
      "lcsc": "C411815"
    },
    "pins": [
      {
        "number": "1",
        "name": "VREF",
        "type": "power_in",
        "description": "2.0-V ±0.8% voltage reference output with 300-µA maximum current capability."
      },
      {
        "number": "2",
        "name": "REFIN",
        "type": "input",
        "description": "Output voltage setting input; accepts 0.5-V to 2.0-V for programmable output voltage control."
      },
      {
        "number": "3",
        "name": "GSNS",
        "type": "input",
        "description": "Ground sense input for differential feedback; short to GND if remote sensing not used."
      },
      {
        "number": "4",
        "name": "VSNS",
        "type": "input",
        "description": "Voltage sense input for differential output voltage feedback at load point."
      },
      {
        "number": "5",
        "name": "COMP",
        "type": "input",
        "description": "Compensation network connection for integrator feedback in control loop."
      },
      {
        "number": "6",
        "name": "TRIP",
        "type": "input",
        "description": "Current sensing threshold configuration input with 10-µA source current and 4700-ppm/°C temperature coefficient."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground reference; connect to quiet point on system ground plane."
      },
      {
        "number": "8",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground return for low-side gate driver; connect as close as possible to device."
      },
      {
        "number": "9",
        "name": "V5",
        "type": "power_in",
        "description": "5V power supply for internal circuits and gate drivers; operating range 4.5-V to 5.5-V."
      },
      {
        "number": "10",
        "name": "DL",
        "type": "output",
        "description": "Low-side MOSFET gate driver output with source resistance 0.9-2.0 Ω and sink resistance 0.5-1.2 Ω."
      },
      {
        "number": "11",
        "name": "DH",
        "type": "output",
        "description": "High-side MOSFET gate driver output with source resistance 1.6-3.0 Ω and sink resistance 0.6-1.5 Ω."
      },
      {
        "number": "12",
        "name": "SW",
        "type": "bidirectional",
        "description": "Switching node return and RDS(on) current sense (-) input; voltage range -5V to 30V."
      },
      {
        "number": "13",
        "name": "BST",
        "type": "power_in",
        "description": "Bootstrap voltage input for high-side gate driver; absolute maximum -0.3V to 36V."
      },
      {
        "number": "14",
        "name": "EN",
        "type": "input",
        "description": "Enable control input with 100-ns debounce; VIH 1.8V, VIL 0.5V, hysteresis 0.25V."
      },
      {
        "number": "15",
        "name": "MODE",
        "type": "input",
        "description": "Mode and frequency selection via resistor-to-GND divider with 16.7-µA source current."
      },
      {
        "number": "16",
        "name": "PGOOD",
        "type": "tri_state",
        "description": "Open-drain power-good comparator output; indicates when output voltage within ±8% (typ) of target."
      },
      {
        "number": "17",
        "name": "Thermal Pad",
        "type": "passive",
        "description": "Thermal pad for heat dissipation; connect directly to system ground plane with multiple vias."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 36,
        "cost_usd": 0.3828,
        "at": "2026-09-23T18:06:14"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps51219",
        "pages": 36,
        "sha256": "d6e730c2602800ae",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps51219rter.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps51219rter-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "414d309ea15f2dcd1b489baed4cb4dbf5967cd9ed530c6cc7dbb6149afe784b1",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}