main
History Download
Ray tps51219rter: specified limits as data (metadata.characteristics, 58 rows from the datasheet) 96665c4

TPS51219RTER

Texas Instruments · DC-DC Converters · QFN-16-EP(3x3)

TPS51219RTER from Texas Instruments, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VREF power_in 2.0-V ±0.8% voltage reference output with 300-µA maximum current capability.
2 REFIN input Output voltage setting input; accepts 0.5-V to 2.0-V for programmable output voltage control.
3 GSNS input Ground sense input for differential feedback; short to GND if remote sensing not used.
4 VSNS input Voltage sense input for differential output voltage feedback at load point.
5 COMP input Compensation network connection for integrator feedback in control loop.
6 TRIP input Current sensing threshold configuration input with 10-µA source current and 4700-ppm/°C temperature coefficient.
7 GND power_in Analog ground reference; connect to quiet point on system ground plane.
8 PGND power_in Power ground return for low-side gate driver; connect as close as possible to device.
9 V5 power_in 5V power supply for internal circuits and gate drivers; operating range 4.5-V to 5.5-V.
10 DL output Low-side MOSFET gate driver output with source resistance 0.9-2.0 Ω and sink resistance 0.5-1.2 Ω.
11 DH output High-side MOSFET gate driver output with source resistance 1.6-3.0 Ω and sink resistance 0.6-1.5 Ω.
12 SW bidirectional Switching node return and RDS(on) current sense (-) input; voltage range -5V to 30V.
13 BST power_in Bootstrap voltage input for high-side gate driver; absolute maximum -0.3V to 36V.
14 EN input Enable control input with 100-ns debounce; VIH 1.8V, VIL 0.5V, hysteresis 0.25V.
15 MODE input Mode and frequency selection via resistor-to-GND divider with 16.7-µA source current.
16 PGOOD tri_state Open-drain power-good comparator output; indicates when output voltage within ±8% (typ) of target.
17 Thermal Pad passive Thermal pad for heat dissipation; connect directly to system ground plane with multiple vias.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package QFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range BST BST -0.3 36 V wrt network ground (note 2) 2
Input voltage range BST(3) BST(3) -0.3 6 V wrt SW (note 3) 2
Input voltage range SW SW -5 30 V wrt network ground (note 2) 2
Input voltage range EN, MODE, TRIP, V5 EN, MODE, TRIP, V5 -0.3 6 V wrt network ground (note 2) 2
Input voltage range COMP, REFIN, VSNS COMP, REFIN, VSNS -0.3 3.6 V wrt network ground (note 2) 2
Input voltage range GSNS GSNS -0.35 0.35 V wrt network ground (note 2) 2
Input voltage range PGND PGND -0.3 0.3 V wrt network ground (note 2) 2
Output voltage range DH DH -5 36 V wrt network ground (note 2) 2
Output voltage range DH(3) DH(3) -0.3 6 V wrt SW (note 3) 2
Output voltage range DL DL -0.3 6 V wrt network ground (note 2) 2
Output voltage range PGOOD PGOOD -0.3 6 V wrt network ground (note 2) 2
Output voltage range VREF VREF -0.3 3.6 V wrt network ground (note 2) 2
Junction temperature range TJ 125 °C 2
Storage temperature range TSTG -55 150 °C 2
Supply voltage V5 4.5 5.5 V 3
Input voltage range BST BST -0.1 33.5 V 3
Input voltage range BST(1) BST(1) -0.1 5.5 V wrt SW (note 1) 3
Input voltage range SW SW -3 28 V 3
Input voltage range SW(2) SW(2) -4.5 28 V applied for less than 30% of repetitive period (note 2) 3
Input voltage range EN, TRIP, MODE EN, TRIP, MODE -0.1 5.5 V 3
Input voltage range REFIN, VSNS, COMP REFIN, VSNS, COMP -0.1 3.5 V 3
Input voltage range GSNS GSNS -0.3 0.3 V 3
Input voltage range PGND PGND -0.1 0.1 V 3
Output voltage range DH DH -3 33.5 V 3
Output voltage range DH(1) DH(1) -0.1 5.5 V wrt SW (note 1) 3
Output voltage range DH(2) DH(2) -4.5 33.5 V applied for less than 30% of repetitive period (note 2) 3
Output voltage range DL DL -0.1 5.5 V 3
Output voltage range PGOOD PGOOD -0.1 5.5 V 3
Output voltage range VREF VREF -0.1 3.5 V 3
Operating free-air temperature TA -40 85 °C 3
VREF output voltage tolerance VVREF(tol) -0.8 0.8 % 0 μA ≤ IVREF < 30 μA, TA = 0°C to 85°C 4
VREF output voltage tolerance VVREF(tol) -1.2 1.2 % 0 μA ≤ IVREF < 300 μA, TA = –40°C to 85°C 4
VREF current limit IVREF(ocl) 0.4 1 mA VVREF-GSNS = 1.7 V 4
VSNS regulation voltage tolerance VVSNS(tol) -9 9 mV VREFIN = 0 V, 0°C ≤ TA ≤ 85°C 4
VSNS regulation voltage tolerance VVSNS(tol) -14 14 mV VREFIN = 0 V, -40°C ≤ TA ≤ 85°C 4
VSNS regulation voltage tolerance VVSNS(tol) -5 5 mV VREFIN = 0.5 V and VREFIN = 2.0 V 4
VSNS discharge current IVSNS(dis) 5 12 mA VEN = 0 V, VVSNS = 0.5 V 4
DH resistance (source) RDH 1.6 3 Ω Source, IDH = –50 mA 4
DH resistance (sink) RDH 0.6 1.5 Ω Sink, IDH = 50 mA 4
DL resistance (source) RDL 0.9 2 Ω Source, IDL = –50 mA 4
DL resistance (sink) RDL 0.5 1.2 Ω Sink, IDL = 50 mA 4
Forward voltage VFBST 0.1 0.2 V VV5-BST, TA = 25°C, IF = 10 mA 4
BST leakage current IBSTLK 0.01 1.5 μA TA = 25°C, VBST = 33 V, VSW = 28 V 4
V5 UVLO threshold voltage (wake-up) VUVLO 4.2 4.4 4.5 V Wake-up 6
V5 UVLO threshold voltage (shutdown) VUVLO 3.7 3.9 4.1 V Shutdown 6
OVP threshold voltage VOVP 118 120 122 % OVP detect voltage 6
UVP threshold voltage VUVP 66 68 70 % UVP detect voltage 6
TRIP source current ITRIP 9 10 11 μA TA = 25°C, VTRIP = 0.4 V, RDS(on) sensing 5
VTRIP voltage range VTRIP 0.2 3 V RDS(on) sensing 5
Current limit threshold VOCL 360 375 390 mV VTRIP = 3.0 V, RDS(on) sensing 5
Current limit threshold VOCL 190 200 210 mV VTRIP = 1.6 V, RDS(on) sensing 5
Current limit threshold VOCL 20 25 30 mV VTRIP = 0.2 V, RDS(on) sensing 5
Junction-to-ambient thermal resistance θJA 48.5 °C/W 3
Junction-to-case (top) thermal resistance θJCtop 49.5 °C/W 3
Junction-to-board thermal resistance θJB 22.1 °C/W 3
Junction-to-top characterization parameter ψJT 0.7 °C/W 3
Junction-to-board characterization parameter ψJB 22.1 °C/W 3
Junction-to-case (bottom) thermal resistance θJCbot 7.1 °C/W 3

CAD (KiCad official)

  • Symbol: TPS51219RTER
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps51219rter-etched.step / tps51219rter-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps51219rter.step / tps51219rter.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 d6e730c2602800ae, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF