main
Ray
Publish 0.1.0
48d52c8
TPS51200QDRCRQ1
Texas Instruments · Power Management - Specialized · VSON-10-EP(3x3)
TPS51200QDRCRQ1 from Texas Instruments, in a VSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFIN | input | Reference input that accepts 0.5 V to 1.8 V per the recommended operating conditions, allowing tracking directly or through a resistor divider. |
| 2 | VLDOIN | input | Supply voltage for the LDO, with a recommended range of -0.1 V to 3.5 V and an absolute maximum of 3.6 V. |
| 3 | VO | output | Power output for the LDO that requires a minimum of 20 µF of capacitance with no maximum limit. |
| 4 | PGND | power_in | Power ground output for the LDO, with a recommended range of -0.1 V to 0.1 V relative to GND. |
| 5 | VOSNS | input | Voltage sense pin for the LDO that connects to the positive pin of the output capacitor or the load, with a recommended range of -0.1 V to 3.5 V. |
| 6 | REFOUT | output | Buffered reference output that must connect to GND through a 0.1 µF ceramic capacitor, must not be left open, and keeps total capacitance below 1 µF if a DDR-side capacitor is used. |
| 7 | EN | input | Enable input that connects to SLP_S3 for DDR VTT applications, and must be kept at or below the VIN voltage at all times, with a recommended range of -0.1 V to 3.5 V. |
| 8 | GND | power_in | Signal ground that connects to the negative pin of the output capacitor. |
| 9 | PGOOD | output | Open-drain output that indicates regulation, with a recommended range of -0.1 V to 3.5 V and an absolute maximum of 6.5 V. |
| 10 | VIN | power_in | 2.5 V or 3.3 V power supply input with a recommended supply range of 2.375 V to 3.500 V, requiring a ceramic decoupling capacitor between 1 µF and 4.7 µF. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSON-10-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN, VLDOIN, VOSNS, REFIN | -0.3 | 3.6 | V | 4 | |||
| Input voltage EN | -0.3 | 6.5 | V | 4 | |||
| PGND to GND | -0.3 | 0.3 | V | 4 | |||
| Output voltage VO, REFOUT | -0.3 | 3.6 | V | 4 | |||
| Output voltage PGOOD | -0.3 | 6.5 | V | 4 | |||
| Operating junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Supply voltage | VIN | 2.375 | 3.5 | V | 4 | ||
| Voltage range EN, VLDOIN, VOSNS | -0.1 | 3.5 | V | 4 | |||
| Voltage range REFIN | 0.5 | 1.8 | V | 4 | |||
| Voltage range VO, PGOOD | -0.1 | 3.5 | V | 4 | |||
| Voltage range REFOUT | -0.1 | 1.8 | V | 4 | |||
| Voltage range PGND | -0.1 | 0.1 | V | 4 | |||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Input current supply | IIN | 0.7 | 1 | mA | TA = 25 °C, VEN = 3.3 V, No Load | 5 | |
| Shutdown current | IIN(SDN) | 65 | 80 | μA | TA = 25 °C, VEN = 0 V, VREFIN = 0, No Load | 5 | |
| Shutdown current | IIN(SDN) | 200 | 400 | μA | TA = 25 °C, VEN = 0 V, VREFIN > 0.4 V, No Load | 5 | |
| Supply current of VLDOIN | ILDOIN | 1 | 50 | μA | TA = 25 °C, VEN = 3.3 V, No Load | 5 | |
| Shutdown current of VLDOIN | ILDOIN(SDN) | 0.1 | 50 | μA | TA = 25 °C, VEN = 0 V, No Load | 5 | |
| Input current, REFIN | IREFIN | 1 | μA | VEN = 3.3 V | 5 | ||
| Output DC voltage, VO | VVOSNS | -15 | 15 | mV | VREFOUT = 1.25 V (DDR1), IO = 0 A | 5 | |
| Output voltage tolerance to REFOUT | VVOTOL | -25 | 25 | mV | -2A < IVO < 2A | 5 | |
| VO source current limit | IVOSRCL | 3 | 4.5 | A | With reference to REFOUT, VOSNS = 90% × VREFOUT | 5 | |
| VO sink current limit | IVOSNCL | 3.5 | 5.5 | A | With reference to REFOUT, VOSNS = 110% × VREFOUT | 5 | |
| Discharge current, VO | IDSCHRG | 18 | 25 | Ω | VREFIN = 0 V, VVO = 0.3 V, VEN = 0 V, TA = 25°C | 5 | |
| VO PGOOD threshold lower | VTH(PG) | -23.5 | -20 | -17.5 | % | PGOOD window lower threshold with respect to REFOUT | 5 |
| VO PGOOD threshold upper | VTH(PG) | 17.5 | 20 | 23.5 | % | PGOOD window upper threshold with respect to REFOUT | 5 |
| Output low voltage | VPGOODLOW | 0.4 | V | ISINK = 4 mA | 5 | ||
| Leakage current | IPGOODLK | 1 | μA | VOSNS = VREFIN (PGOOD high impedance), PGOOD = VIN + 0.2 V | 5 | ||
| REFIN voltage range | VREFIN | 0.5 | 1.8 | V | 5 | ||
| REFIN undervoltage lockout | VREFINUVLO | 360 | 390 | 420 | mV | REFIN rising | 5 |
| REFOUT voltage tolerance to VREFIN | VREFOUTTOL | -15 | 15 | mV | -10 mA ≤ IREFOUT ≤ 10 mA, 0.6 V ≤ VREFIN ≤ 1.25 V | 5 | |
| REFOUT voltage tolerance to VREFIN | VREFOUTTOL | -12 | 12 | mV | -1 mA ≤ IREFOUT ≤ 1 mA, 0.6 V ≤ VREFIN ≤ 1.25 V | 5 | |
| REFOUT source current limit | IREFOUTSRCL | 10 | 40 | mA | VREFOUT = 0.5 V | 5 | |
| REFOUT sink current limit | IREFOUTSNCL | 10 | 40 | mA | VREFOUT = 1.5 V | 5 | |
| VIN UVLO threshold | VVINUVVIN | 2.2 | 2.3 | 2.375 | V | Wake up, TA = 25°C | 5 |
| High-level input voltage Enable | VENIH | 1.7 | V | 5 | |||
| Low-level input voltage Enable | VENIL | 0.3 | V | 5 | |||
| Logic input leakage current EN | IENLEAK | -1 | 1 | μA | TA = 25°C | 5 | |
| PGOOD startup delay | TPGSTUPDLY | 2 | ms | Startup rising edge, VOSNS within 15% of REFOUT | 6 | ||
| PGOOD bad delay | TPBADDLY | 10 | μs | VOSNS is outside of the ±20% PGOOD window | 6 | ||
| REFIN undervoltage lockout hysteresis | VREFINUVHYS | 20 | mV | 5 | |||
| PGOOD hysteresis | 5 | % | 5 | ||||
| Hysteresis (VIN UVLO) | 50 | mV | 5 | ||||
| Hysteresis voltage Enable | VENYST | 0.5 | V | 5 | |||
| Thermal shutdown threshold | TSON | 150 | °C | Shutdown temperature | 5 | ||
| Thermal shutdown hysteresis | 25 | °C | 5 | ||||
| Junction-to-ambient thermal resistance | RθJA | 52.7 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJCtop | 63.9 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 28.4 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 3.5 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 28.6 | °C/W | 4 | |||
| Junction-to-case (bottom) thermal resistance | RθJCbot | 16.1 | °C/W | 4 |
CAD (Adom-generated)
- Symbol:
TPS51200QDRCRQ1 - Footprint:
Adom_Gen:Texas_Instruments_TPS51200_efd923 - 3D model: generated to fit the land (STEP)
- 3D model files:
tps51200qdrcrq1-etched.step/tps51200qdrcrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps51200qdrcrq1.step/tps51200qdrcrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
6258a3b10816e7f9, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# TPS51200QDRCRQ1
**Texas Instruments** · Power Management - Specialized · VSON-10-EP(3x3)
TPS51200QDRCRQ1 from Texas Instruments, in a VSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFIN | input | Reference input that accepts 0.5 V to 1.8 V per the recommended operating conditions, allowing tracking directly or through a resistor divider. |
| 2 | VLDOIN | input | Supply voltage for the LDO, with a recommended range of -0.1 V to 3.5 V and an absolute maximum of 3.6 V. |
| 3 | VO | output | Power output for the LDO that requires a minimum of 20 µF of capacitance with no maximum limit. |
| 4 | PGND | power_in | Power ground output for the LDO, with a recommended range of -0.1 V to 0.1 V relative to GND. |
| 5 | VOSNS | input | Voltage sense pin for the LDO that connects to the positive pin of the output capacitor or the load, with a recommended range of -0.1 V to 3.5 V. |
| 6 | REFOUT | output | Buffered reference output that must connect to GND through a 0.1 µF ceramic capacitor, must not be left open, and keeps total capacitance below 1 µF if a DDR-side capacitor is used. |
| 7 | EN | input | Enable input that connects to SLP_S3 for DDR VTT applications, and must be kept at or below the VIN voltage at all times, with a recommended range of -0.1 V to 3.5 V. |
| 8 | GND | power_in | Signal ground that connects to the negative pin of the output capacitor. |
| 9 | PGOOD | output | Open-drain output that indicates regulation, with a recommended range of -0.1 V to 3.5 V and an absolute maximum of 6.5 V. |
| 10 | VIN | power_in | 2.5 V or 3.3 V power supply input with a recommended supply range of 2.375 V to 3.500 V, requiring a ceramic decoupling capacitor between 1 µF and 4.7 µF. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSON-10-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 11 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage VIN, VLDOIN, VOSNS, REFIN | | -0.3 | | 3.6 | V | | 4 |
| Input voltage EN | | -0.3 | | 6.5 | V | | 4 |
| PGND to GND | | -0.3 | | 0.3 | V | | 4 |
| Output voltage VO, REFOUT | | -0.3 | | 3.6 | V | | 4 |
| Output voltage PGOOD | | -0.3 | | 6.5 | V | | 4 |
| Operating junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| Supply voltage | VIN | 2.375 | | 3.5 | V | | 4 |
| Voltage range EN, VLDOIN, VOSNS | | -0.1 | | 3.5 | V | | 4 |
| Voltage range REFIN | | 0.5 | | 1.8 | V | | 4 |
| Voltage range VO, PGOOD | | -0.1 | | 3.5 | V | | 4 |
| Voltage range REFOUT | | -0.1 | | 1.8 | V | | 4 |
| Voltage range PGND | | -0.1 | | 0.1 | V | | 4 |
| Operating free-air temperature | TA | -40 | | 125 | °C | | 4 |
| Input current supply | IIN | | 0.7 | 1 | mA | TA = 25 °C, VEN = 3.3 V, No Load | 5 |
| Shutdown current | IIN(SDN) | | 65 | 80 | μA | TA = 25 °C, VEN = 0 V, VREFIN = 0, No Load | 5 |
| Shutdown current | IIN(SDN) | | 200 | 400 | μA | TA = 25 °C, VEN = 0 V, VREFIN > 0.4 V, No Load | 5 |
| Supply current of VLDOIN | ILDOIN | | 1 | 50 | μA | TA = 25 °C, VEN = 3.3 V, No Load | 5 |
| Shutdown current of VLDOIN | ILDOIN(SDN) | | 0.1 | 50 | μA | TA = 25 °C, VEN = 0 V, No Load | 5 |
| Input current, REFIN | IREFIN | | | 1 | μA | VEN = 3.3 V | 5 |
| Output DC voltage, VO | VVOSNS | -15 | | 15 | mV | VREFOUT = 1.25 V (DDR1), IO = 0 A | 5 |
| Output voltage tolerance to REFOUT | VVOTOL | -25 | | 25 | mV | -2A < IVO < 2A | 5 |
| VO source current limit | IVOSRCL | 3 | | 4.5 | A | With reference to REFOUT, VOSNS = 90% × VREFOUT | 5 |
| VO sink current limit | IVOSNCL | 3.5 | | 5.5 | A | With reference to REFOUT, VOSNS = 110% × VREFOUT | 5 |
| Discharge current, VO | IDSCHRG | 18 | | 25 | Ω | VREFIN = 0 V, VVO = 0.3 V, VEN = 0 V, TA = 25°C | 5 |
| VO PGOOD threshold lower | VTH(PG) | -23.5 | -20 | -17.5 | % | PGOOD window lower threshold with respect to REFOUT | 5 |
| VO PGOOD threshold upper | VTH(PG) | 17.5 | 20 | 23.5 | % | PGOOD window upper threshold with respect to REFOUT | 5 |
| Output low voltage | VPGOODLOW | | | 0.4 | V | ISINK = 4 mA | 5 |
| Leakage current | IPGOODLK | | | 1 | μA | VOSNS = VREFIN (PGOOD high impedance), PGOOD = VIN + 0.2 V | 5 |
| REFIN voltage range | VREFIN | 0.5 | | 1.8 | V | | 5 |
| REFIN undervoltage lockout | VREFINUVLO | 360 | 390 | 420 | mV | REFIN rising | 5 |
| REFOUT voltage tolerance to VREFIN | VREFOUTTOL | -15 | | 15 | mV | -10 mA ≤ IREFOUT ≤ 10 mA, 0.6 V ≤ VREFIN ≤ 1.25 V | 5 |
| REFOUT voltage tolerance to VREFIN | VREFOUTTOL | -12 | | 12 | mV | -1 mA ≤ IREFOUT ≤ 1 mA, 0.6 V ≤ VREFIN ≤ 1.25 V | 5 |
| REFOUT source current limit | IREFOUTSRCL | 10 | | 40 | mA | VREFOUT = 0.5 V | 5 |
| REFOUT sink current limit | IREFOUTSNCL | 10 | | 40 | mA | VREFOUT = 1.5 V | 5 |
| VIN UVLO threshold | VVINUVVIN | 2.2 | 2.3 | 2.375 | V | Wake up, TA = 25°C | 5 |
| High-level input voltage Enable | VENIH | 1.7 | | | V | | 5 |
| Low-level input voltage Enable | VENIL | | | 0.3 | V | | 5 |
| Logic input leakage current EN | IENLEAK | -1 | | 1 | μA | TA = 25°C | 5 |
| PGOOD startup delay | TPGSTUPDLY | | 2 | | ms | Startup rising edge, VOSNS within 15% of REFOUT | 6 |
| PGOOD bad delay | TPBADDLY | | 10 | | μs | VOSNS is outside of the ±20% PGOOD window | 6 |
| REFIN undervoltage lockout hysteresis | VREFINUVHYS | | 20 | | mV | | 5 |
| PGOOD hysteresis | | | 5 | | % | | 5 |
| Hysteresis (VIN UVLO) | | | 50 | | mV | | 5 |
| Hysteresis voltage Enable | VENYST | | 0.5 | | V | | 5 |
| Thermal shutdown threshold | TSON | | 150 | | °C | Shutdown temperature | 5 |
| Thermal shutdown hysteresis | | | 25 | | °C | | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 52.7 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance | RθJCtop | | 63.9 | | °C/W | | 4 |
| Junction-to-board thermal resistance | RθJB | | 28.4 | | °C/W | | 4 |
| Junction-to-top characterization parameter | ψJT | | 3.5 | | °C/W | | 4 |
| Junction-to-board characterization parameter | ψJB | | 28.6 | | °C/W | | 4 |
| Junction-to-case (bottom) thermal resistance | RθJCbot | | 16.1 | | °C/W | | 4 |
## CAD (Adom-generated)
- Symbol: `TPS51200QDRCRQ1`
- Footprint: `Adom_Gen:Texas_Instruments_TPS51200_efd923`
- 3D model: generated to fit the land (STEP)
- 3D model files: `tps51200qdrcrq1-etched.step` / `tps51200qdrcrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps51200qdrcrq1.step` / `tps51200qdrcrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps51200-q1.pdf) (38 pp, sha256 `6258a3b10816e7f9`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/tps51200qdrcrq1-datasheet.pdf)