← Commit history
page.json+9−6@@ -60,7 +60,7 @@ }, { "number": "5",- "name": "ISNS\u2013",+ "name": "ISNS–", "type": "input", "description": "Inductor current sense comparator inverting input pin; normally connected to inductor side of current sense resistor." },@@ -80,7 +80,7 @@ "number": "8", "name": "LDRV", "type": "output",- "description": "Low-side gate driver output; connect to gate of low-side N-channel MOSFET; when VIN bias is removed, internal 200-k\u03a9 resistor pulls LDRV to PGND."+ "description": "Low-side gate driver output; connect to gate of low-side N-channel MOSFET; when VIN bias is removed, internal 200-kΩ resistor pulls LDRV to PGND." }, { "number": "9",@@ -92,7 +92,7 @@ "number": "10", "name": "VCC", "type": "power_out",- "description": "Output of internal LDO and power supply for internal control circuits and gate drivers; VCC typically 5.5 V for TPS43061; connect low-ESR ceramic capacitor from this pin to PGND with recommended capacitance range 0.47 to 10 \u00b5F."+ "description": "Output of internal LDO and power supply for internal control circuits and gate drivers; VCC typically 5.5 V for TPS43061; connect low-ESR ceramic capacitor from this pin to PGND with recommended capacitance range 0.47 to 10 µF." }, { "number": "11",@@ -110,13 +110,13 @@ "number": "13", "name": "HDRV", "type": "output",- "description": "High-side gate driver output; connect to gate of high-side synchronous rectifier MOSFET; when VIN bias is removed, internally connected to SW through 200-k\u03a9 resistor."+ "description": "High-side gate driver output; connect to gate of high-side synchronous rectifier MOSFET; when VIN bias is removed, internally connected to SW through 200-kΩ resistor." }, { "number": "14", "name": "PGOOD", "type": "output",- "description": "Power good indicator; open-drain output indicates when output voltage is within predetermined limits; TI recommends 10-k\u03a9 pullup resistor to VCC or external logic supply pin."+ "description": "Power good indicator; open-drain output indicates when output voltage is within predetermined limits; TI recommends 10-kΩ pullup resistor to VCC or external logic supply pin." }, { "number": "15",@@ -212,5 +212,8 @@ "docs/tps43061rter-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }