← Commit history

Initial commit: component/tps43061rter

Ray ·266160deb6 ·
2 files changed +249
README.mdadded+54
@@ -0,0 +1,54 @@+# TPS43061RTER++**Texas Instruments** · DC-DC Converters · WQFN-16-EP(3x3)++TPS43061RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RT/CLK | input | Resistor timing and external clock pin; external resistor from this pin to AGND programs switching frequency between 50 kHz and 1 MHz, or external clock between 300 kHz to 1 MHz synchronizes switching frequency. |+| 2 | SS | input | Soft-start programming pin; capacitor between SS pin and AGND sets soft-start time. |+| 3 | COMP | output | Output of internal transconductance error amplifier; feedback loop compensation network connects from this pin to AGND. |+| 4 | FB | input | Error amplifier input and feedback pin for voltage regulation; connect to center tap of resistor divider to set output voltage. |+| 5 | ISNS- | input | Inductor current sense comparator inverting input pin; normally connected to inductor side of current sense resistor. |+| 6 | ISNS+ | input | Inductor current sense comparator non-inverting input pin; normally connected to VIN side of current sense resistor. |+| 7 | VIN | power_in | Input supply pin to the IC; connect to supply voltage between 4.5 V and 38 V absolute maximum 40 V. |+| 8 | LDRV | output | Low-side gate driver output; connect to gate of low-side N-channel MOSFET; when VIN bias is removed, internal 200-kΩ resistor pulls LDRV to PGND. |+| 9 | PGND | power_in | Power ground of IC; connect to source of low-side MOSFET; PGND should be connected to AGND via single point on PCB. |+| 10 | VCC | power_out | Output of internal LDO and power supply for internal control circuits and gate drivers; VCC typically 5.5 V for TPS43061; connect low-ESR ceramic capacitor from this pin to PGND with recommended capacitance range 0.47 to 10 µF. |+| 11 | BOOT | passive | Bootstrap capacitor node for high-side MOSFET gate driver; connect bootstrap capacitor from this pin to SW pin. |+| 12 | SW | passive | Switching node of boost converter; connect to junction of drain of low-side MOSFET, source of high-side synchronous MOSFET, and inductor. |+| 13 | HDRV | output | High-side gate driver output; connect to gate of high-side synchronous rectifier MOSFET; when VIN bias is removed, internally connected to SW through 200-kΩ resistor. |+| 14 | PGOOD | output | Power good indicator; open-drain output indicates when output voltage is within predetermined limits; TI recommends 10-kΩ pullup resistor to VCC or external logic supply pin. |+| 15 | EN | input | Enable pin with internal pullup current source; floating enables IC; pull below 1.2 V for standby mode; pull below 0.4 V for shutdown mode; can implement adjustable UVLO with two resistors. |+| 16 | AGND | power_in | Analog signal ground of IC; AGND should be connected to PGND at single point on PCB. |+| 17 | PowerPAD | passive | Thermal pad should be connected to AGND; use thermal vias to connect to internal ground plane for improved power dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS43061RTER`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps43061rter-etched.step` / `tps43061rter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps43061rter.step` / `tps43061rter.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps43061) (44 pp, sha256 `2cd9f6a548135d9e`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps43061rter-datasheet.pdf)
page.jsonadded+195
@@ -0,0 +1,195 @@+{+  "slug": "tps43061rter",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps43061rter",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps43061rter.kicad_sym",+    "tps43061rter.kicad_mod",+    "tps43061rter.glb",+    "tps43061rter.step",+    "tps43061rter.lbr",+    "docs/hero.png",+    "docs/tps43061rter-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS43061RTER",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps43061",+    "parts": {+      "symbol": "tps43061rter.kicad_sym",+      "footprint": "tps43061rter.kicad_mod",+      "model_3d": "tps43061rter-etched.glb",+      "model_3d_plain": "tps43061rter.glb",+      "model_3d_step": "tps43061rter-etched.step",+      "model_3d_step_plain": "tps43061rter.step",+      "lbr": "tps43061rter.lbr"+    },+    "distributor_links": {+      "lcsc": "C527683"+    },+    "pins": [+      {+        "number": "1",+        "name": "RT/CLK",+        "type": "input",+        "description": "Resistor timing and external clock pin; external resistor from this pin to AGND programs switching frequency between 50 kHz and 1 MHz, or external clock between 300 kHz to 1 MHz synchronizes switching frequency."+      },+      {+        "number": "2",+        "name": "SS",+        "type": "input",+        "description": "Soft-start programming pin; capacitor between SS pin and AGND sets soft-start time."+      },+      {+        "number": "3",+        "name": "COMP",+        "type": "output",+        "description": "Output of internal transconductance error amplifier; feedback loop compensation network connects from this pin to AGND."+      },+      {+        "number": "4",+        "name": "FB",+        "type": "input",+        "description": "Error amplifier input and feedback pin for voltage regulation; connect to center tap of resistor divider to set output voltage."+      },+      {+        "number": "5",+        "name": "ISNS–",+        "type": "input",+        "description": "Inductor current sense comparator inverting input pin; normally connected to inductor side of current sense resistor."+      },+      {+        "number": "6",+        "name": "ISNS+",+        "type": "input",+        "description": "Inductor current sense comparator non-inverting input pin; normally connected to VIN side of current sense resistor."+      },+      {+        "number": "7",+        "name": "VIN",+        "type": "power_in",+        "description": "Input supply pin to the IC; connect to supply voltage between 4.5 V and 38 V absolute maximum 40 V."+      },+      {+        "number": "8",+        "name": "LDRV",+        "type": "output",+        "description": "Low-side gate driver output; connect to gate of low-side N-channel MOSFET; when VIN bias is removed, internal 200-kΩ resistor pulls LDRV to PGND."+      },+      {+        "number": "9",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground of IC; connect to source of low-side MOSFET; PGND should be connected to AGND via single point on PCB."+      },+      {+        "number": "10",+        "name": "VCC",+        "type": "power_out",+        "description": "Output of internal LDO and power supply for internal control circuits and gate drivers; VCC typically 5.5 V for TPS43061; connect low-ESR ceramic capacitor from this pin to PGND with recommended capacitance range 0.47 to 10 µF."+      },+      {+        "number": "11",+        "name": "BOOT",+        "type": "passive",+        "description": "Bootstrap capacitor node for high-side MOSFET gate driver; connect bootstrap capacitor from this pin to SW pin."+      },+      {+        "number": "12",+        "name": "SW",+        "type": "passive",+        "description": "Switching node of boost converter; connect to junction of drain of low-side MOSFET, source of high-side synchronous MOSFET, and inductor."+      },+      {+        "number": "13",+        "name": "HDRV",+        "type": "output",+        "description": "High-side gate driver output; connect to gate of high-side synchronous rectifier MOSFET; when VIN bias is removed, internally connected to SW through 200-kΩ resistor."+      },+      {+        "number": "14",+        "name": "PGOOD",+        "type": "output",+        "description": "Power good indicator; open-drain output indicates when output voltage is within predetermined limits; TI recommends 10-kΩ pullup resistor to VCC or external logic supply pin."+      },+      {+        "number": "15",+        "name": "EN",+        "type": "input",+        "description": "Enable pin with internal pullup current source; floating enables IC; pull below 1.2 V for standby mode; pull below 0.4 V for shutdown mode; can implement adjustable UVLO with two resistors."+      },+      {+        "number": "16",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog signal ground of IC; AGND should be connected to PGND at single point on PCB."+      },+      {+        "number": "17",+        "name": "PowerPAD",+        "type": "passive",+        "description": "Thermal pad should be connected to AGND; use thermal vias to connect to internal ground plane for improved power dissipation."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 44,+        "cost_usd": 0.4638,+        "at": "2026-09-24T06:23:18"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps43061",+        "pages": 44,+        "sha256": "2cd9f6a548135d9e",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file