main
Ray tps40211dgqr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) b293813
{
  "slug": "tps40211dgqr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, MSOP-10-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps40211dgqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps40211dgqr.kicad_sym",
    "tps40211dgqr.kicad_mod",
    "tps40211dgqr.glb",
    "tps40211dgqr.step",
    "tps40211dgqr.lbr",
    "docs/hero.png",
    "docs/tps40211dgqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS40211DGQR",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps40211",
    "parts": {
      "symbol": "tps40211dgqr.kicad_sym",
      "footprint": "tps40211dgqr.kicad_mod",
      "model_3d": "tps40211dgqr-etched.glb",
      "model_3d_plain": "tps40211dgqr.glb",
      "model_3d_step": "tps40211dgqr-etched.step",
      "model_3d_step_plain": "tps40211dgqr.step",
      "lbr": "tps40211dgqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C473356"
    },
    "pins": [
      {
        "number": "1",
        "name": "RC",
        "type": "input",
        "description": "Oscillator frequency setting pin; connect resistor between RC and VDD and capacitor between RC and GND to set switching frequency."
      },
      {
        "number": "2",
        "name": "SS",
        "type": "input",
        "description": "Soft start timing pin; connect capacitor to GND to program soft start ramp time and overcurrent retry timeout duration."
      },
      {
        "number": "3",
        "name": "DIS/EN",
        "type": "input",
        "description": "Disable/enable pin with internal 1 MΩ pull-down to GND; pulling above 1.2 V typical disables device and BP regulator; below 1.05 V typical enables device."
      },
      {
        "number": "4",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output; connect loop compensation network between COMP and FB pins for control loop response."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Error amplifier inverting input; connect voltage divider from output to this pin to set output voltage; compensation network between FB and COMP pins."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference."
      },
      {
        "number": "7",
        "name": "ISNS",
        "type": "input",
        "description": "Current sense input; connect external sense resistor between this pin and GND; overcurrent protection triggers when voltage exceeds 150 mV typical."
      },
      {
        "number": "8",
        "name": "GDRV",
        "type": "output",
        "description": "Gate drive output for N-channel power MOSFET; provides up to 400 mA source and sink current capability."
      },
      {
        "number": "9",
        "name": "BP",
        "type": "power_out",
        "description": "Linear regulator output pin; 8 V nominal with 7 V to 9 V operating range; bypass with 1.0 μF capacitor to GND."
      },
      {
        "number": "10",
        "name": "VDD",
        "type": "power_in",
        "description": "Input power supply voltage; accepts 4.5 V to 52 V; bypass capacitor to GND required; can connect to converter output for slope compensation."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 11 added from the footprint"
        ],
        "pages_sent": 50,
        "cost_usd": 0.5779,
        "at": "2026-09-23T22:44:09"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps40211",
        "pages": 50,
        "sha256": "7213a870ac0ef0d9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps40211dgqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps40211dgqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "add8bfc29699a867321ebc08f553a8acc3638dd3615aa17792e5a6288e61e3e7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}