TPS40210DGQ

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps40210dgq",
  "title": "TPS40210DGQ",
  "brief": "Texas Instruments DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tps40210dgq",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS40210DGQ",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps40210",
    "parts": {
      "symbol": "tps40210dgq.kicad_sym",
      "footprint": "tps40210dgq.kicad_mod",
      "model_3d": "tps40210dgq-hero.glb",
      "model_3d_plain": "tps40210dgq.glb",
      "model_3d_step": "tps40210dgq-etched.step",
      "model_3d_step_plain": "tps40210dgq.step",
      "lbr": "tps40210dgq.lbr"
    },
    "distributor_links": {
      "lcsc": "C1519417",
      "digikey": "296-24813-5-ND",
      "mouser": "595-TPS40210DGQ"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T21:47:23Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-24813-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS40210DGQ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RC",
        "type": "input",
        "description": "Oscillator timing pin: a resistor from RC to VDD and a capacitor from RC to GND set the switching frequency (35 kHz to 1000 kHz range), and RC must be pulled below 150 mV for at least 20 ns to synchronize to an external clock."
      },
      {
        "number": "2",
        "name": "SS",
        "type": "input",
        "description": "Soft-start pin: a capacitor from SS to GND sets the closed-loop soft-start time and also serves as the restart timer during overcurrent faults."
      },
      {
        "number": "3",
        "name": "DIS/EN",
        "type": "input",
        "description": "Active-high disable input: pulling it above the 1.2 V typical threshold shuts the controller down and turns off the BP regulator, while leaving it open enables the device."
      },
      {
        "number": "4",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output: the loop compensation network is connected between COMP and FB."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Error amplifier inverting input: a divider from the output sets the output voltage, with a 700 mV typical reference for TPS40210 (the TPS40211 uses 260 mV)."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground; the VDD and BP bypass capacitors must return to this pin."
      },
      {
        "number": "7",
        "name": "ISNS",
        "type": "input",
        "description": "Current sense input: an external sense resistor is connected between ISNS and GND, and the overcurrent threshold is 150 mV typical; absolute maximum voltage is 8 V."
      },
      {
        "number": "8",
        "name": "GDRV",
        "type": "output",
        "description": "Gate driver output that drives the gate of the external power N-channel MOSFET, with a 400 mA typical gate drive rating; absolute maximum is 9 V."
      },
      {
        "number": "9",
        "name": "BP",
        "type": "power_out",
        "description": "Internal linear regulator output of 8 V nominal that must be bypassed with a 1.0 µF capacitor to GND and powers the controller's internal circuitry including the gate driver."
      },
      {
        "number": "10",
        "name": "VDD",
        "type": "power_in",
        "description": "System input supply operating from 4.5 V to 52 V (absolute maximum 52 V), which must be bypassed close to GND."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package name mismatch: the datasheet lists TPS40210DGQ as HVSSOP (DGQ), 10 pins, with a PowerPAD exp; The exposed thermal pad (PowerPAD) on the DGQ package is shown in the stencil drawing but is not giv; The DIS/EN internal pull-down value is inconsistent within the datasheet (1 MΩ in the pin table, 1.1",
          "exposed pad 11 added from the footprint"
        ],
        "pages_sent": 35,
        "cost_usd": 0.1561,
        "at": "2026-10-10T21:47:08"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps40210",
        "pages": 50,
        "sha256": "7213a870ac0ef0d9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps40210dgq.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          0.95
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps40210dgq-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          0.95
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1c4285a544d1db184852f775ab2981696c6bf6d2e0e2bcb2aa7dd53a73d3804a",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "MSOP-10-EP",
      "Category": "Power Management (PMIC)",
      "Pins": "11"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps40210dgq"
  ],
  "discovery_pitch": "TPS40210DGQ (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps40210dgq.kicad_sym",
    "tps40210dgq.kicad_mod",
    "tps40210dgq.glb",
    "tps40210dgq.step",
    "tps40210dgq.lbr",
    "docs/hero.png",
    "docs/tps40210dgq-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps40210dgq-hero.glb",
    "tps40210dgq-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}