main
Ray
Publish 0.1.0
01dcb83
TPS40200QDRQ1
Texas Instruments · DC-DC Converters · SOIC-8
TPS40200QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC | input | Switching frequency setting RC network with a capacitor from RC to GND and a resistor from VIN to RC; can be synchronized to an external clock by pulling it to GND with an open-drain output, and the sync pulse width should not be excessive. |
| 2 | SS | input | Soft-start programming pin where a capacitor to GND sets soft-start time; pulling it below 150 mV stops output switching (shutdown) and it also acts as the restart timer for overcurrent events. |
| 3 | COMP | output | Error amplifier output to which the control loop compensation network is connected from COMP to FB (absolute maximum -0.3 V to 9 V). |
| 4 | FB | input | Error amplifier inverting input connected to the center tap of the feedback resistor network (absolute maximum -0.3 V to 5.5 V). |
| 5 | GND | power_in | Device ground. |
| 6 | GDRV | output | Driver output for the external P-channel MOSFET, rated from VDD-10 V to VDD. |
| 7 | ISNS | input | Current-sense comparator input with a current sense resistor connected between ISNS and VDD to set the overcurrent threshold (absolute maximum -0.3 V to 52 V). |
| 8 | VDD | power_in | System input voltage of 4.5 V to 52 V recommended, with a local bypass capacitor connected from VDD to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS40200QDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps40200qdrq1-etched.step/tps40200qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps40200qdrq1.step/tps40200qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
7e7a3a742966a621, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS40200QDRQ1
**Texas Instruments** · DC-DC Converters · SOIC-8
TPS40200QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC | input | Switching frequency setting RC network with a capacitor from RC to GND and a resistor from VIN to RC; can be synchronized to an external clock by pulling it to GND with an open-drain output, and the sync pulse width should not be excessive. |
| 2 | SS | input | Soft-start programming pin where a capacitor to GND sets soft-start time; pulling it below 150 mV stops output switching (shutdown) and it also acts as the restart timer for overcurrent events. |
| 3 | COMP | output | Error amplifier output to which the control loop compensation network is connected from COMP to FB (absolute maximum -0.3 V to 9 V). |
| 4 | FB | input | Error amplifier inverting input connected to the center tap of the feedback resistor network (absolute maximum -0.3 V to 5.5 V). |
| 5 | GND | power_in | Device ground. |
| 6 | GDRV | output | Driver output for the external P-channel MOSFET, rated from VDD-10 V to VDD. |
| 7 | ISNS | input | Current-sense comparator input with a current sense resistor connected between ISNS and VDD to set the overcurrent threshold (absolute maximum -0.3 V to 52 V). |
| 8 | VDD | power_in | System input voltage of 4.5 V to 52 V recommended, with a local bypass capacitor connected from VDD to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `TPS40200QDRQ1`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `tps40200qdrq1-etched.step` / `tps40200qdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps40200qdrq1.step` / `tps40200qdrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps40200-q1) (41 pp, sha256 `7e7a3a742966a621`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps40200qdrq1-datasheet.pdf)