Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS40200QDRQ1

Texas Instruments · DC-DC Converters · SOIC-8

TPS40200QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC input Switching frequency setting RC network with a capacitor from RC to GND and a resistor from VIN to RC; can be synchronized to an external clock by pulling it to GND with an open-drain output, and the sync pulse width should not be excessive.
2 SS input Soft-start programming pin where a capacitor to GND sets soft-start time; pulling it below 150 mV stops output switching (shutdown) and it also acts as the restart timer for overcurrent events.
3 COMP output Error amplifier output to which the control loop compensation network is connected from COMP to FB (absolute maximum -0.3 V to 9 V).
4 FB input Error amplifier inverting input connected to the center tap of the feedback resistor network (absolute maximum -0.3 V to 5.5 V).
5 GND power_in Device ground.
6 GDRV output Driver output for the external P-channel MOSFET, rated from VDD-10 V to VDD.
7 ISNS input Current-sense comparator input with a current sense resistor connected between ISNS and VDD to set the overcurrent threshold (absolute maximum -0.3 V to 52 V).
8 VDD power_in System input voltage of 4.5 V to 52 V recommended, with a local bypass capacitor connected from VDD to GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Supply Chip
Pins 8

CAD (KiCad official)

  • Symbol: TPS40200QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tps40200qdrq1-etched.step / tps40200qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps40200qdrq1.step / tps40200qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 7e7a3a742966a621, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF