Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS40200D

Texas Instruments · DC-DC Converters · SOIC-8

TPS40200D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC input Oscillator timing pin; connect resistor from VDD (≤750 μA maximum pull-down current) and capacitor to GND to set switching frequency over the 35-500 kHz range; can be synchronised by pulling below 150 mV for ≥20 ns via open-drain output; absolute maximum −0.3 V to 5.5 V.
2 SS input Soft-start programming pin; connect capacitor from SS to GND; internal pull-up resistance 65-170 kΩ; switching disabled when pulled below 150 mV (VSSRST reset threshold 100-200 mV); also serves as restart timer during hiccup overcurrent recovery; absolute maximum −0.3 V to 9.0 V.
3 COMP output Error amplifier output; connect control-loop Type-II compensation network between COMP and FB; source current 100-250 μA (VFB = 0.6 V, VCOMP = 1 V), sink current 1.0-2.5 mA (VFB = 1.2 V, VCOMP = 1 V); open-loop gain ≥60 dB, gain-bandwidth product 1.5-3 MHz; absolute maximum −0.3 V to 9.0 V.
4 FB input Error amplifier inverting input; regulation threshold 679-710 mV over −40°C to 125°C and 4.5-52 V VDD; input bias current 100-250 nA; connect centre-tap of output feedback resistor divider to this pin; absolute maximum −0.3 V to 5.5 V.
5 GND power_in Device ground reference; all internal voltages referenced to this pin; connect local bypass capacitor from VDD to GND.
6 GDRV output P-channel MOSFET gate driver output; gate drive voltage (VDD − VGDRV) = 6-10 V for VDD 12-52 V; pull-up source current 125-300 mA, pull-down sink current 200-300 mA; driver current folds back once gate is pulled to 8 V to limit dissipation at high input voltages; absolute maximum VIN − 10 V to VIN.
7 ISNS input Current-sense comparator input; connect a current-sense resistor between VDD and ISNS; overcurrent declared when voltage drop from VDD to ISNS exceeds 55-140 mV (VILIM, −40°C to 125°C, 4.5-52 V); absolute maximum −0.3 V to 52 V.
8 VDD power_in System input supply voltage; operating range 4.5-52 V; UVLO turn-on threshold 3.8-4.5 V with 110-275 mV hysteresis; quiescent current 1.5 mA typ / 3.0 mA max at fOSC = 300 kHz; connect local bypass capacitor from VDD to GND; absolute maximum −0.3 V to 52 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: TPS40200D
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tps40200d-etched.step / tps40200d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps40200d.step / tps40200d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 a3e23ec7367038ec, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF