main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps40055pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps40055pwpr: viewers · Ray
package.json tps40055pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps40055pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps40055pwpr · Ray
tps40055pwpr-etched.fit.json tps40055pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps40055pwpr-etched.glb tps40055pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps40055pwpr-etched.step tps40055pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps40055pwpr.glb Publish 0.1.0 · Ray
tps40055pwpr.kicad_mod Publish 0.1.0 · Ray
tps40055pwpr.kicad_sym Publish 0.1.0 · Ray
tps40055pwpr.lbr Publish 0.1.0 · Ray
tps40055pwpr.step Publish 0.1.0 · Ray

TPS40055PWPR

Texas Instruments · DC-DC Converters · HTSSOP-16-EP

TPS40055PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 KFF input Resistor from this pin to VIN programs voltage feedforward compensation and UVLO threshold level, with internal current division controlling PWM ramp slope.
2 RT input Resistor from this pin to ground sets the switching frequency of the internal oscillator according to fSW = 17.82×10⁶/(RT + 17 kΩ).
3 BP5 power_out 5-V voltage reference output; bypass to ground with 0.1-µF ceramic capacitor and limit external DC load to 1 mA maximum.
4 SYNC input Synchronization input for external oscillator clock source, or connect to SGND for free-running operation at RT-programmed frequency.
5 SGND power_in Signal ground reference for the device; must make single point connection to PGND plane.
6 SS/SD input Soft-start and shutdown control pin; capacitor charged at 2.3-µA internal source creates startup ramp from 0.85 V to 1.55 V regulation threshold.
7 VFB input Inverting input to error amplifier with 0.7-V internal reference voltage; feedback network connected from COMP pin regulates closed-loop output voltage.
8 COMP output Error amplifier output and PWM comparator input; internally clamped above peak ramp voltage to improve large signal transient response.
9 PGND power_in Power ground reference requiring low-impedance connection path to lower MOSFET source or sources.
10 LDRV tri_state Gate driver output for N-channel synchronous rectifier MOSFET, switching between BP10 voltage (on) and ground (off).
11 BP10 power_out 10-V voltage reference output for synchronous rectifier gate drive; bypass with 1-µF ceramic capacitor and limit external DC load to 1 mA maximum.
12 SW input Switched node connection point for overcurrent sensing; voltage (VIN - SW) across high-side MOSFET compared to ILIM voltage.
13 HDRV tri_state Floating gate driver output for high-side N-channel MOSFET, switching between BOOST voltage (on) and SW node voltage (off).
14 BOOST power_out Bootstrap gate drive supply voltage for high-side MOSFET gate driver; nominally 9 V greater than SW voltage, bypass with 0.1-µF ceramic capacitor.
15 VIN power_in Supply voltage input for device operation over 8 V to 40 V input range; recommend 8 V to 40 V per Recommended Operating Conditions.
16 ILIM input Current limit setting input with internal 8.5-µA current sink; resistor from VIN sets overcurrent threshold by comparing voltage drop across resistor to (VIN - SW).
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-16-EP
Category Power Management (PMIC)
Pins 17

CAD (KiCad official)

  • Symbol: TPS40055PWPR
  • Footprint: Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: tps40055pwpr-etched.step / tps40055pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps40055pwpr.step / tps40055pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 8efd3db408deb44b, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF