← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# TPS40055PWPR++**Texas Instruments** · DC-DC Converters · HTSSOP-16-EP++TPS40055PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | KFF | input | Resistor from this pin to VIN programs voltage feedforward compensation and UVLO threshold level, with internal current division controlling PWM ramp slope. |+| 2 | RT | input | Resistor from this pin to ground sets the switching frequency of the internal oscillator according to fSW = 17.82×10⁶/(RT + 17 kΩ). |+| 3 | BP5 | power_out | 5-V voltage reference output; bypass to ground with 0.1-µF ceramic capacitor and limit external DC load to 1 mA maximum. |+| 4 | SYNC | input | Synchronization input for external oscillator clock source, or connect to SGND for free-running operation at RT-programmed frequency. |+| 5 | SGND | power_in | Signal ground reference for the device; must make single point connection to PGND plane. |+| 6 | SS/SD | input | Soft-start and shutdown control pin; capacitor charged at 2.3-µA internal source creates startup ramp from 0.85 V to 1.55 V regulation threshold. |+| 7 | VFB | input | Inverting input to error amplifier with 0.7-V internal reference voltage; feedback network connected from COMP pin regulates closed-loop output voltage. |+| 8 | COMP | output | Error amplifier output and PWM comparator input; internally clamped above peak ramp voltage to improve large signal transient response. |+| 9 | PGND | power_in | Power ground reference requiring low-impedance connection path to lower MOSFET source or sources. |+| 10 | LDRV | tri_state | Gate driver output for N-channel synchronous rectifier MOSFET, switching between BP10 voltage (on) and ground (off). |+| 11 | BP10 | power_out | 10-V voltage reference output for synchronous rectifier gate drive; bypass with 1-µF ceramic capacitor and limit external DC load to 1 mA maximum. |+| 12 | SW | input | Switched node connection point for overcurrent sensing; voltage (VIN - SW) across high-side MOSFET compared to ILIM voltage. |+| 13 | HDRV | tri_state | Floating gate driver output for high-side N-channel MOSFET, switching between BOOST voltage (on) and SW node voltage (off). |+| 14 | BOOST | power_out | Bootstrap gate drive supply voltage for high-side MOSFET gate driver; nominally 9 V greater than SW voltage, bypass with 0.1-µF ceramic capacitor. |+| 15 | VIN | power_in | Supply voltage input for device operation over 8 V to 40 V input range; recommend 8 V to 40 V per Recommended Operating Conditions. |+| 16 | ILIM | input | Current limit setting input with internal 8.5-µA current sink; resistor from VIN sets overcurrent threshold by comparing voltage drop across resistor to (VIN - SW). |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS40055PWPR`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `tps40055pwpr-etched.step` / `tps40055pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps40055pwpr.step` / `tps40055pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps40055) (43 pp, sha256 `8efd3db408deb44b`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps40055pwpr-datasheet.pdf)
page.jsonadded+197@@ -0,0 +1,197 @@+{+ "slug": "tps40055pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps40055pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps40055pwpr.kicad_sym",+ "tps40055pwpr.kicad_mod",+ "tps40055pwpr.glb",+ "tps40055pwpr.step",+ "tps40055pwpr.lbr",+ "docs/hero.png",+ "docs/tps40055pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS40055PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-16-EP",+ "pin_count": 17,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps40055",+ "parts": {+ "symbol": "tps40055pwpr.kicad_sym",+ "footprint": "tps40055pwpr.kicad_mod",+ "model_3d": "tps40055pwpr-etched.glb",+ "model_3d_plain": "tps40055pwpr.glb",+ "model_3d_step": "tps40055pwpr-etched.step",+ "model_3d_step_plain": "tps40055pwpr.step",+ "lbr": "tps40055pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C69340"+ },+ "pins": [+ {+ "number": "1",+ "name": "KFF",+ "type": "input",+ "description": "Resistor from this pin to VIN programs voltage feedforward compensation and UVLO threshold level, with internal current division controlling PWM ramp slope."+ },+ {+ "number": "2",+ "name": "RT",+ "type": "input",+ "description": "Resistor from this pin to ground sets the switching frequency of the internal oscillator according to fSW = 17.82×10⁶/(RT + 17 kΩ)."+ },+ {+ "number": "3",+ "name": "BP5",+ "type": "power_out",+ "description": "5-V voltage reference output; bypass to ground with 0.1-µF ceramic capacitor and limit external DC load to 1 mA maximum."+ },+ {+ "number": "4",+ "name": "SYNC",+ "type": "input",+ "description": "Synchronization input for external oscillator clock source, or connect to SGND for free-running operation at RT-programmed frequency."+ },+ {+ "number": "5",+ "name": "SGND",+ "type": "power_in",+ "description": "Signal ground reference for the device; must make single point connection to PGND plane."+ },+ {+ "number": "6",+ "name": "SS/SD",+ "type": "input",+ "description": "Soft-start and shutdown control pin; capacitor charged at 2.3-µA internal source creates startup ramp from 0.85 V to 1.55 V regulation threshold."+ },+ {+ "number": "7",+ "name": "VFB",+ "type": "input",+ "description": "Inverting input to error amplifier with 0.7-V internal reference voltage; feedback network connected from COMP pin regulates closed-loop output voltage."+ },+ {+ "number": "8",+ "name": "COMP",+ "type": "output",+ "description": "Error amplifier output and PWM comparator input; internally clamped above peak ramp voltage to improve large signal transient response."+ },+ {+ "number": "9",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground reference requiring low-impedance connection path to lower MOSFET source or sources."+ },+ {+ "number": "10",+ "name": "LDRV",+ "type": "tri_state",+ "description": "Gate driver output for N-channel synchronous rectifier MOSFET, switching between BP10 voltage (on) and ground (off)."+ },+ {+ "number": "11",+ "name": "BP10",+ "type": "power_out",+ "description": "10-V voltage reference output for synchronous rectifier gate drive; bypass with 1-µF ceramic capacitor and limit external DC load to 1 mA maximum."+ },+ {+ "number": "12",+ "name": "SW",+ "type": "input",+ "description": "Switched node connection point for overcurrent sensing; voltage (VIN - SW) across high-side MOSFET compared to ILIM voltage."+ },+ {+ "number": "13",+ "name": "HDRV",+ "type": "tri_state",+ "description": "Floating gate driver output for high-side N-channel MOSFET, switching between BOOST voltage (on) and SW node voltage (off)."+ },+ {+ "number": "14",+ "name": "BOOST",+ "type": "power_out",+ "description": "Bootstrap gate drive supply voltage for high-side MOSFET gate driver; nominally 9 V greater than SW voltage, bypass with 0.1-µF ceramic capacitor."+ },+ {+ "number": "15",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply voltage input for device operation over 8 V to 40 V input range; recommend 8 V to 40 V per Recommended Operating Conditions."+ },+ {+ "number": "16",+ "name": "ILIM",+ "type": "input",+ "description": "Current limit setting input with internal 8.5-µA current sink; resistor from VIN sets overcurrent threshold by comparing voltage drop across resistor to (VIN - SW)."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 43,+ "cost_usd": 0.4414,+ "at": "2026-09-24T02:02:41"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps40055",+ "pages": 43,+ "sha256": "8efd3db408deb44b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}