TPS3808G15DRVR

{
  "slug": "tps3808g15drvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Supervisor And Reset ICs, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps3808g15drvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps3808g15drvr.kicad_sym",
    "tps3808g15drvr.kicad_mod",
    "tps3808g15drvr.glb",
    "tps3808g15drvr.step",
    "tps3808g15drvr.lbr",
    "docs/hero.png",
    "docs/tps3808g15drvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps3808g15drvr-hero.glb",
    "tps3808g15drvr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS3808G15DRVR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6-EP(2x2)",
    "pin_count": 7,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps3808",
    "parts": {
      "symbol": "tps3808g15drvr.kicad_sym",
      "footprint": "tps3808g15drvr.kicad_mod",
      "model_3d": "tps3808g15drvr-hero.glb",
      "model_3d_plain": "tps3808g15drvr.glb",
      "model_3d_step": "tps3808g15drvr-etched.step",
      "model_3d_step_plain": "tps3808g15drvr.step",
      "lbr": "tps3808g15drvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2066795",
      "digikey": "296-19708-2-ND",
      "mouser": "595-TPS3808G15DRVR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T05:46:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-19708-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS3808G15DRVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage input with a recommended operating range of 1.7 V to 6.5 V; place a 0.1 µF ceramic capacitor near this pin."
      },
      {
        "number": "2",
        "name": "SENSE",
        "type": "input",
        "description": "Monitored voltage input; RESET is asserted when the voltage on this pin falls below the threshold voltage VIT, with a recommended 1 nF to 10 nF bypass capacitor."
      },
      {
        "number": "3",
        "name": "CT",
        "type": "input",
        "description": "Reset delay programming pin: a 40 kΩ to 200 kΩ resistor to VDD gives a fixed 300 ms delay, leaving it open gives a fixed 20 ms delay, and a ground-referenced capacitor of at least 100 pF gives a user-programmable 1.25 ms to 10 s delay; VCT is limited to VDD."
      },
      {
        "number": "4",
        "name": "MR",
        "type": "input",
        "description": "Manual reset input; driving it low asserts RESET, and it is internally pulled up to VDD through 90 kΩ (VIL max 0.3·VDD, VIH min 0.7·VDD, absolute maximum 6.5 V)."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "6",
        "name": "RESET",
        "type": "output",
        "description": "Open-drain active-low reset output that requires a pull-up resistor of 10 kΩ to 1 MΩ and is rated up to 6.5 V with a maximum sink current of 5 mA."
      },
      {
        "number": "7",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad (labeled 'THERMAL PAD' in Figure 5-2) is not assigned a pin number in the da; The TPS3808G15DRVR orderable part number is listed in the package addendum as WSON (DRV), 6 pins, so",
          "exposed pad 7 added from the footprint"
        ],
        "pages_sent": 24,
        "cost_usd": 0.1166,
        "at": "2026-10-11T05:46:29"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps3808",
        "pages": 40,
        "sha256": "508cd6b5f24c9f25",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps3808g15drvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps3808g15drvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fe61eafa3c7ce5ddf648fd03d5a4d3102a6a52daf80ed6f3047f28b74cf85c60",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}