TPS3703A7330DSER

{
  "slug": "tps3703a7330dser",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Supervisor And Reset ICs, WSON-6(1.5x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps3703a7330dser",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps3703a7330dser.kicad_sym",
    "tps3703a7330dser.kicad_mod",
    "tps3703a7330dser.glb",
    "tps3703a7330dser.step",
    "tps3703a7330dser.lbr",
    "docs/hero.png",
    "docs/tps3703a7330dser-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps3703a7330dser-hero.glb",
    "tps3703a7330dser-hero.overlay.json",
    "tps3703a7330dser-etched.glb"
  ],
  "component": {
    "mpn": "TPS3703A7330DSER",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6(1.5x1.5)",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps3703.pdf",
    "parts": {
      "symbol": "tps3703a7330dser.kicad_sym",
      "footprint": "tps3703a7330dser.kicad_mod",
      "model_3d": "tps3703a7330dser-hero.glb",
      "model_3d_plain": "tps3703a7330dser-etched.glb",
      "model_3d_step": "tps3703a7330dser-etched.step",
      "model_3d_step_plain": "tps3703a7330dser.step",
      "lbr": "tps3703a7330dser.lbr"
    },
    "distributor_links": {
      "lcsc": "C2861206",
      "digikey": "296-TPS3703A7330DSERTR-ND",
      "mouser": "595-TPS3703A7330DSER"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T23:45:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS3703A7330DSERTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS3703A7330DSER",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SENSE",
        "type": "input",
        "description": "Input for the monitored supply voltage rail; when SENSE goes above the overvoltage threshold or below the undervoltage threshold, RESET is driven low, and it should connect to VDD when monitoring VDD."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage input pin, with a 0.1-µF ceramic capacitor recommended close to this pin."
      },
      {
        "number": "3",
        "name": "CT",
        "type": "input",
        "description": "Capacitor time delay pin: connecting it to VDD or leaving it floating selects one of two fixed time delays, and an external capacitor to ground programs the delay."
      },
      {
        "number": "4",
        "name": "RESET",
        "type": "output",
        "description": "Active-low, open-drain output that goes low when SENSE is above VIT+ (OV) or below VIT- (UV), and requires a pull-up resistor to the desired pull-up voltage."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin."
      },
      {
        "number": "6",
        "name": "MR",
        "type": "input",
        "description": "Manual reset input: pulling it to a logic low (VMR_L) asserts a reset, the output goes high after the reset delay time (tD) expires once MR is released, and MR can be left floating when not in use."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout taken from the Pin Functions table on page 4 for the DSE (WSON-6) package. The top-view figur"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0173,
        "at": "2026-11-05T23:45:04"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps3703.pdf",
        "pages": 40,
        "sha256": "cc65714774e50c97",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps3703a7330dser.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.5,
          1.48,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b286efb19ee878f7094913552ef4b3d65067278c4f8bce5547303f697797652f",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps3703a7330dser-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.5,
          1.48,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cd5bcdb1fe652fc81830fb8e1f280cdaed49e7142a827122f66bf37f525e5dc9",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}