main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps3306-33qdrq1: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps3306-33qdrq1-etched.glb Publish 0.1.0 · Ray
tps3306-33qdrq1-etched.step tps3306-33qdrq1: factory component page (tier=mfr) · Ray
tps3306-33qdrq1-hero.glb tps3306-33qdrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tps3306-33qdrq1-hero.overlay.json Publish 0.1.0 · Ray
tps3306-33qdrq1.glb Publish 0.1.0 · Ray
tps3306-33qdrq1.kicad_mod Publish 0.1.0 · Ray
tps3306-33qdrq1.kicad_sym Publish 0.1.0 · Ray
tps3306-33qdrq1.lbr Publish 0.1.0 · Ray
tps3306-33qdrq1.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

TPS3306-33QDRQ1

Texas Instruments · Supervisor And Reset ICs · SOIC-8

TPS3306-33QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SENSE1 input Sense voltage 1 input; RESET is asserted while SENSE1 is below its negative-going threshold VIT (4.55 V typ for the TPS3306-33) and the input must stay within 0 V to (VDD + 0.3 V) × VIT / 1.25 V.
2 SENSE2 input Sense voltage 2 input; RESET is asserted while SENSE2 is below its negative-going threshold VIT (2.93 V typ for the TPS3306-33) and the input must stay within 0 V to (VDD + 0.3 V) × VIT / 1.25 V.
3 PFI input Power-fail comparator input compared against an internal 1.25 V reference (VPFI typ 1.25 V), with input voltage limited to 0 V to VDD + 0.3 V; if unused, connect to ground.
4 GND power_in Ground reference for all device voltages, with all voltage values specified with respect to GND.
5 RESET output Active-low, open-drain reset output that goes low when SENSE1 or SENSE2 falls below its threshold or the watchdog times out, and it stays low for td (100 ms typ) after the monitored voltages recover.
6 PFO output Open-drain power-fail output that goes low when PFI falls below 1.25 V (typ) and returns high when PFI rises above about 1.25 V plus 10 mV hysteresis.
7 WDI input Watchdog timer input that must toggle (either edge) within the 0.5 s to 1.2 s time-out (0.8 s typ) to prevent a RESET, with VIH of 0.7 × VDD and VIL of 0.3 × VDD; leaving it unconnected disables the watchdog.
8 VDD power_in Supply voltage, specified from 2.7 V to 6 V (7 V absolute maximum), which must be above 1.1 V for RESET to be defined.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VDD 7 V Voltages with respect to GND (Note 1) 6
All other pins voltage -0.3 7 V 6
Maximum low output current IOL 5 mA 6
Maximum high output current IOH -5 mA 6
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 6
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 6
Continuous total power dissipation 725 mW Package D, TA ≤ 25°C (Dissipation Rating Table) 6
Operating free-air temperature range (absolute maximum) TA -40 125 °C 6
Storage temperature range Tstg -65 150 °C 6
Soldering temperature 260 °C 6
Supply voltage (recommended) VDD 2.7 6 V 6
Input voltage at WDI and PFI VI 0 V 6
Input voltage at SENSE1 and SENSE2 VI 0 V 6
Operating free-air temperature range (recommended) TA -40 125 °C 6
Low-level output voltage RESET, PFO VOL 0.2 V VDD = 2.7 V to 6 V, IOL = 20 µA 7
Low-level output voltage RESET, PFO VOL 0.4 V VDD = 3.3 V, IOL = 2 mA 7
Power-up reset voltage 0.4 V VDD ≥ 1.1 V, IOL = 20 µA 7
Negative-going input threshold voltage, SENSE1 (TPS3306-33) VIT 4.44 4.55 4.68 V VDD = 2.7 V to 6 V 7
Negative-going input threshold voltage, SENSE2 (TPS3306-33) VIT 2.84 2.93 3.04 V VDD = 2.7 V to 6 V, TA = −40°C to 125°C 7
Power-fail input threshold voltage (PFI) VPFI 1.2 1.25 1.3 V 7
Average high-level input current, WDI IH(AV) 100 150 µA WDI = VDD = 6 V, time average (dc = 88%) 7
Average low-level input current, WDI IL(AV) -15 -20 µA WDI = 0 V, VDD = 6 V, time average (dc = 12%) 7
High-level input current, WDI IH 120 170 µA WDI = VDD = 6 V 7
High-level input current, SENSE1 IH 5 10 µA VSENSE1 = VDD = 6 V 7
High-level input current, SENSE2 IH 6 10 µA VSENSE2 = VDD = 6 V 7
Low-level input current, WDI IL -120 -170 µA WDI = 0 V, VDD = 6 V 7
Input current, PFI II -30 30 nA VDD = 6 V, 0 V ≤ VI ≤ VDD 7
Supply current IDD 15 40 µA 7
Pulse width, SENSEn tw 6 µs VSENSEnL = VIT − 0.2 V, VSENSEnH = VIT + 0.2 V 7
Pulse width, WDI tw 100 ns VIH = 0.7 × VDD, VIL = 0.3 × VDD 7
Watchdog time-out tt(out) 0.5 0.8 1.2 s VI(SENSEn) ≥ VIT + 0.2 V 8
Delay time td 70 100 140 ms VI(SENSEn) ≥ VIT + 0.2 V 8
Propagation delay, high- to low-level output, SENSEn to RESET tPHL 1 5 µs VIH = VIT + 0.2 V, VIL = VIT − 0.2 V 8
Propagation delay, high- to low-level output, PFI to PFO tPHL 0.5 1 s 8
Propagation delay, low- to high-level output, PFI to PFO tPLH 0.5 1 µs 8

CAD (KiCad official)

  • Symbol: TPS3306-33QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tps3306-33qdrq1-etched.step / tps3306-33qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps3306-33qdrq1.step / tps3306-33qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 eef613f38c3d1330, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF