main
Ray tps2h160bqpwprq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) e239cf7
{
  "schema_version": 1,
  "type": "component",
  "slug": "tps2h160bqpwprq1",
  "title": "TPS2H160BQPWPRQ1",
  "brief": "Texas Instruments Power Distribution Switches, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "tps2h160bqpwprq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS2H160BQPWPRQ1",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-16-EP",
    "pin_count": 17,
    "category": "Power Supply Chip",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps2h160-q1",
    "parts": {
      "symbol": "tps2h160bqpwprq1.kicad_sym",
      "footprint": "tps2h160bqpwprq1.kicad_mod",
      "model_3d": "tps2h160bqpwprq1-etched.glb",
      "model_3d_plain": "tps2h160bqpwprq1.glb",
      "model_3d_step": "tps2h160bqpwprq1-etched.step",
      "model_3d_step_plain": "tps2h160bqpwprq1.step",
      "lbr": "tps2h160bqpwprq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2680441"
    },
    "pins": [
      {
        "number": "1",
        "name": "IN1",
        "type": "input",
        "description": "Logic input control for channel-1 activation (VIH ≥ 2 V, VIL ≤ 0.8 V); internal pulldown resistor to GND."
      },
      {
        "number": "2",
        "name": "IN2",
        "type": "input",
        "description": "Logic input control for channel-2 activation (VIH ≥ 2 V, VIL ≤ 0.8 V); internal pulldown resistor to GND."
      },
      {
        "number": "3",
        "name": "DIAG_EN",
        "type": "input",
        "description": "Enable/disable pin for diagnostic functions; internal pulldown resistor, logic levels VIH ≥ 2 V / VIL ≤ 0.8 V."
      },
      {
        "number": "4",
        "name": "FAULT",
        "type": "output",
        "description": "Global open-drain fault report (OR of both channels' fault conditions); pulled low (VOL ≤ 0.2 V at IFAULT = 2 mA) when a fault occurs, requires external 3.3 V or 5 V pullup, version B only."
      },
      {
        "number": "5",
        "name": "SEL",
        "type": "input",
        "description": "Current-sense channel-selection input that multiplexes the shared CS output between channel 1 (SEL = 0) and channel 2 (SEL = 1); internal pulldown."
      },
      {
        "number": "6",
        "name": "CS",
        "type": "output",
        "description": "Current-sense analog output that sources 1/K(CS) (K(CS) = 290 typ) of the selected channel's load current into an external resistor, producing a 0-4 V linear signal, and reports faults by pulling up to VCS(H) (4.5-6.5 V)."
      },
      {
        "number": "7",
        "name": "CL",
        "type": "input",
        "description": "Adjustable current-limit set pin; connect an external resistor to set the current-limit threshold (ICL(th) with K(CL) = 2500 typ), or connect directly to device GND to use the fixed internal current limit (ICL(int), 9-15 A)."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference pin; can source/sink current up to -100/250 mA for t < 2 minutes (Absolute Maximum Ratings)."
      },
      {
        "number": "9",
        "name": "THER",
        "type": "input",
        "description": "Thermal-shutdown behavior control input; internal pulldown, THER low selects auto-retry mode and THER high selects latch-off mode after thermal shutdown."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "11",
        "name": "OUT2",
        "type": "output",
        "description": "High-side switch output for channel 2, connected to the load; combined with pin 12 for the channel-2 output."
      },
      {
        "number": "12",
        "name": "OUT2",
        "type": "output",
        "description": "High-side switch output for channel 2, connected to the load; combined with pin 11 for the channel-2 output."
      },
      {
        "number": "13",
        "name": "VS",
        "type": "power_in",
        "description": "Power-supply input pin, operating range 4 V to 40 V nominal (3.4 V turn-on to 40 V max per front page), 48 V max for t < 400 ms; combined with pin 14."
      },
      {
        "number": "14",
        "name": "VS",
        "type": "power_in",
        "description": "Power-supply input pin, operating range 4 V to 40 V nominal, 48 V max for t < 400 ms; combined with pin 13."
      },
      {
        "number": "15",
        "name": "OUT1",
        "type": "output",
        "description": "High-side switch output for channel 1, connected to the load; combined with pin 16 for the channel-1 output."
      },
      {
        "number": "16",
        "name": "OUT1",
        "type": "output",
        "description": "High-side switch output for channel 1, connected to the load; combined with pin 15 for the channel-1 output."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin diagram labeling discrepancy on PAGE 3: The diagram labeled 'TPS2H160-Q1 Version B Top View' sho; Version comparison consistency: The Device Comparison Table on PAGE 3 states 'TPS2H160-Q1 Version B ",
          "exposed pad 17 added from the footprint"
        ],
        "pages_sent": 40,
        "cost_usd": 0.4372,
        "at": "2026-09-23T04:17:47"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps2h160-q1",
        "pages": 40,
        "sha256": "3efb7de2cb9fa29f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps2h160bqpwprq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps2h160bqpwprq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "28a50380d731439de85b350150b1926d651f52b40b077700df5b7728ed4b47a7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-16-EP",
      "Category": "Power Supply Chip",
      "Pins": "17"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps2h160bqpwprq1"
  ],
  "discovery_pitch": "TPS2H160BQPWPRQ1 (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps2h160bqpwprq1.kicad_sym",
    "tps2h160bqpwprq1.kicad_mod",
    "tps2h160bqpwprq1.glb",
    "tps2h160bqpwprq1.step",
    "tps2h160bqpwprq1.lbr",
    "docs/hero.png",
    "docs/tps2h160bqpwprq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T11:58:29.331Z"
}