main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps2h160bqpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps2h160bqpwprq1: viewers · Ray
package.json tps2h160bqpwprq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps2h160bqpwprq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps2h160bqpwprq1 · Ray
tps2h160bqpwprq1-etched.fit.json tps2h160bqpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps2h160bqpwprq1-etched.glb tps2h160bqpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps2h160bqpwprq1-etched.step tps2h160bqpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps2h160bqpwprq1.glb Publish 0.1.0 · Ray
tps2h160bqpwprq1.kicad_mod Publish 0.1.0 · Ray
tps2h160bqpwprq1.kicad_sym Publish 0.1.0 · Ray
tps2h160bqpwprq1.lbr Publish 0.1.0 · Ray
tps2h160bqpwprq1.step Publish 0.1.0 · Ray

TPS2H160BQPWPRQ1

Texas Instruments · Power Distribution Switches · HTSSOP-16-EP

TPS2H160BQPWPRQ1 from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1 input Logic input control for channel-1 activation (VIH ≥ 2 V, VIL ≤ 0.8 V); internal pulldown resistor to GND.
2 IN2 input Logic input control for channel-2 activation (VIH ≥ 2 V, VIL ≤ 0.8 V); internal pulldown resistor to GND.
3 DIAG_EN input Enable/disable pin for diagnostic functions; internal pulldown resistor, logic levels VIH ≥ 2 V / VIL ≤ 0.8 V.
4 FAULT output Global open-drain fault report (OR of both channels' fault conditions); pulled low (VOL ≤ 0.2 V at IFAULT = 2 mA) when a fault occurs, requires external 3.3 V or 5 V pullup, version B only.
5 SEL input Current-sense channel-selection input that multiplexes the shared CS output between channel 1 (SEL = 0) and channel 2 (SEL = 1); internal pulldown.
6 CS output Current-sense analog output that sources 1/K(CS) (K(CS) = 290 typ) of the selected channel's load current into an external resistor, producing a 0-4 V linear signal, and reports faults by pulling up to VCS(H) (4.5-6.5 V).
7 CL input Adjustable current-limit set pin; connect an external resistor to set the current-limit threshold (ICL(th) with K(CL) = 2500 typ), or connect directly to device GND to use the fixed internal current limit (ICL(int), 9-15 A).
8 GND power_in Device ground reference pin; can source/sink current up to -100/250 mA for t < 2 minutes (Absolute Maximum Ratings).
9 THER input Thermal-shutdown behavior control input; internal pulldown, THER low selects auto-retry mode and THER high selects latch-off mode after thermal shutdown.
10 NC unconnected No internal connection.
11 OUT2 output High-side switch output for channel 2, connected to the load; combined with pin 12 for the channel-2 output.
12 OUT2 output High-side switch output for channel 2, connected to the load; combined with pin 11 for the channel-2 output.
13 VS power_in Power-supply input pin, operating range 4 V to 40 V nominal (3.4 V turn-on to 40 V max per front page), 48 V max for t < 400 ms; combined with pin 14.
14 VS power_in Power-supply input pin, operating range 4 V to 40 V nominal, 48 V max for t < 400 ms; combined with pin 13.
15 OUT1 output High-side switch output for channel 1, connected to the load; combined with pin 16 for the channel-1 output.
16 OUT1 output High-side switch output for channel 1, connected to the load; combined with pin 15 for the channel-1 output.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-16-EP
Category Power Supply Chip
Pins 17

CAD (KiCad official)

  • Symbol: TPS2H160BQPWPRQ1
  • Footprint: Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: tps2h160bqpwprq1-etched.step / tps2h160bqpwprq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2h160bqpwprq1.step / tps2h160bqpwprq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 3efb7de2cb9fa29f, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF