main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps2819qdbvrq1: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
tps2819qdbvrq1-etched.glb Publish 0.1.0 · Ray
tps2819qdbvrq1-etched.step tps2819qdbvrq1: factory component page (tier=mfr) · Ray
tps2819qdbvrq1-hero.glb tps2819qdbvrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tps2819qdbvrq1-hero.overlay.json Publish 0.1.0 · Ray
tps2819qdbvrq1.glb Publish 0.1.0 · Ray
tps2819qdbvrq1.kicad_mod Publish 0.1.0 · Ray
tps2819qdbvrq1.kicad_sym Publish 0.1.0 · Ray
tps2819qdbvrq1.lbr Publish 0.1.0 · Ray
tps2819qdbvrq1.step Publish 0.1.0 · Ray

TPS2819QDBVRQ1

Texas Instruments · Gate Drive ICs · SOT-23-5

TPS2819QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Regulator input, recommended 8 V to 40 V on TPS2816 through TPS2819; if the regulator is not used it should be connected to VCC, and grounding VDD destroys the regulator.
2 GND power_in Device ground; all voltages are specified with respect to the device GND terminal.
3 IN input Driver logic input with positive-going threshold of about two-thirds VCC and negative-going threshold of about one-third VCC, with an absolute maximum range of -0.3 V to VCC + 0.5 V.
4 OUT output Gate drive output capable of up to ±100 mA continuous and 2 A peak, with an output voltage range of -0.5 V to VCC + 0.5 V.
5 VCC power_in Driver supply voltage, recommended 4 V to 14 V, which is also the output stage supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.3 15 V 3
Regulator supply voltage range VDD -0.3 42 V 3
Input voltage range IN -0.3 V upper limit VCC + 0.5 V 3
Output voltage range (pin 4) -0.5 V upper limit VCC + 0.5 V 3
Continuous regulator output current VCC 25 mA 3
Continuous output current, OUT -100 100 mA 3
Operating junction temperature range TJ -40 150 °C 3
Storage temperature range Tstg -65 150 °C 3
Lead temperature 260 °C 1,6 mm (1/16 in) from case for 10 s 3
Total power dissipation rating, DBV package 437 mW TA ≤ 25°C 3
ESD Human Body Model 2000 V HBM, TPS2819 3
ESD Machine Model 200 V MM, TPS2819 3
ESD Charged-Device Model 500 V CDM, TPS2819 3
Regulator input voltage range, TPS2816 through TPS2819 VDD 8 40 V 3
Supply voltage VCC 4 14 V 3
Input voltage IN -0.3 V upper limit VCC 3
Continuous regulator output current ICC 0 20 mA 3
Operating junction temperature TJ -40 125 °C 3
Positive-going input threshold voltage 3.3 4 V VCC = 5 V 3
Positive-going input threshold voltage 6.6 7 V VCC = 10 V 3
Positive-going input threshold voltage 9.3 10 V VCC = 14 V 3
Negative-going input threshold voltage 1 1.7 V VCC = 5 V 4
Negative-going input threshold voltage 2 3.3 V VCC = 10 V 4
Negative-going input threshold voltage 2.5 4.6 V VCC = 14 V 4
High-level output voltage, TPS2819 8 9.1 V TA = 25°C 4
Output voltage in dropout 8 10 V IO = 10 mA, VDD = 10 V 4
Regulator output voltage 10 11.5 13 V 14 ≤ VDD ≤ 40 V, 0 ≤ IO ≤ 20 mA 4
Low-level output voltage 0.18 0.25 V IO = 1 mA 4
Low-level output voltage 1 2 V IO = 100 mA 4
Supply current into VCC, TPS2819 ICC 25 50 µA IN = high or low, TA = 25°C; High = 10 V, Low = 0 V 4
Supply current into VDD, TPS2819 IDD 50 150 µA VDD = 20 V, IN = high = 11 V or low = 0 V 4
Rise time tr 25 ns VCC = 14 V 6
Rise time tr 14 30 ns VCC = 10 V 6
Rise time tr 35 ns VCC = 5 V 6
Fall time tf 25 ns VCC = 14 V 6
Fall time tf 14 30 ns VCC = 10 V 6
Fall time tf 35 ns VCC = 5 V 6
Propagation delay time, high-to-low-level output tPHL 40 ns VCC = 14 V 6
Propagation delay time, high-to-low-level output tPHL 24 45 ns VCC = 10 V 6
Propagation delay time, high-to-low-level output tPHL 50 ns VCC = 5 V 6
Propagation delay time, low-to-high-level output tPLH 40 ns VCC = 14 V 6
Propagation delay time, low-to-high-level output tPLH 24 45 ns VCC = 10 V 6
Propagation delay time, low-to-high-level output tPLH 50 ns VCC = 5 V 6
Input capacitance 5 10 pF 4
Input voltage hysteresis 1.3 V 4
Input current, TPS2818/19/28/29 0.2 µA Input = 0 V or VCC 4

CAD (KiCad official)

  • Symbol: TPS2819QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps2819qdbvrq1-etched.step / tps2819qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2819qdbvrq1.step / tps2819qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 e41abaf671a98ee3, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF