3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS2819QDBVRQ1
Texas Instruments · Gate Drive ICs · SOT-23-5
TPS2819QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Regulator input, recommended 8 V to 40 V on TPS2816 through TPS2819; if the regulator is not used it should be connected to VCC, and grounding VDD destroys the regulator. |
| 2 | GND | power_in | Device ground; all voltages are specified with respect to the device GND terminal. |
| 3 | IN | input | Driver logic input with positive-going threshold of about two-thirds VCC and negative-going threshold of about one-third VCC, with an absolute maximum range of -0.3 V to VCC + 0.5 V. |
| 4 | OUT | output | Gate drive output capable of up to ±100 mA continuous and 2 A peak, with an output voltage range of -0.5 V to VCC + 0.5 V. |
| 5 | VCC | power_in | Driver supply voltage, recommended 4 V to 14 V, which is also the output stage supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.3 | 15 | V | 3 | ||
| Regulator supply voltage range | VDD | -0.3 | 42 | V | 3 | ||
| Input voltage range | IN | -0.3 | V | upper limit VCC + 0.5 V | 3 | ||
| Output voltage range (pin 4) | -0.5 | V | upper limit VCC + 0.5 V | 3 | |||
| Continuous regulator output current | VCC | 25 | mA | 3 | |||
| Continuous output current, OUT | -100 | 100 | mA | 3 | |||
| Operating junction temperature range | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 in) from case for 10 s | 3 | |||
| Total power dissipation rating, DBV package | 437 | mW | TA ≤ 25°C | 3 | |||
| ESD Human Body Model | 2000 | V | HBM, TPS2819 | 3 | |||
| ESD Machine Model | 200 | V | MM, TPS2819 | 3 | |||
| ESD Charged-Device Model | 500 | V | CDM, TPS2819 | 3 | |||
| Regulator input voltage range, TPS2816 through TPS2819 | VDD | 8 | 40 | V | 3 | ||
| Supply voltage | VCC | 4 | 14 | V | 3 | ||
| Input voltage | IN | -0.3 | V | upper limit VCC | 3 | ||
| Continuous regulator output current | ICC | 0 | 20 | mA | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Positive-going input threshold voltage | 3.3 | 4 | V | VCC = 5 V | 3 | ||
| Positive-going input threshold voltage | 6.6 | 7 | V | VCC = 10 V | 3 | ||
| Positive-going input threshold voltage | 9.3 | 10 | V | VCC = 14 V | 3 | ||
| Negative-going input threshold voltage | 1 | 1.7 | V | VCC = 5 V | 4 | ||
| Negative-going input threshold voltage | 2 | 3.3 | V | VCC = 10 V | 4 | ||
| Negative-going input threshold voltage | 2.5 | 4.6 | V | VCC = 14 V | 4 | ||
| High-level output voltage, TPS2819 | 8 | 9.1 | V | TA = 25°C | 4 | ||
| Output voltage in dropout | 8 | 10 | V | IO = 10 mA, VDD = 10 V | 4 | ||
| Regulator output voltage | 10 | 11.5 | 13 | V | 14 ≤ VDD ≤ 40 V, 0 ≤ IO ≤ 20 mA | 4 | |
| Low-level output voltage | 0.18 | 0.25 | V | IO = 1 mA | 4 | ||
| Low-level output voltage | 1 | 2 | V | IO = 100 mA | 4 | ||
| Supply current into VCC, TPS2819 | ICC | 25 | 50 | µA | IN = high or low, TA = 25°C; High = 10 V, Low = 0 V | 4 | |
| Supply current into VDD, TPS2819 | IDD | 50 | 150 | µA | VDD = 20 V, IN = high = 11 V or low = 0 V | 4 | |
| Rise time | tr | 25 | ns | VCC = 14 V | 6 | ||
| Rise time | tr | 14 | 30 | ns | VCC = 10 V | 6 | |
| Rise time | tr | 35 | ns | VCC = 5 V | 6 | ||
| Fall time | tf | 25 | ns | VCC = 14 V | 6 | ||
| Fall time | tf | 14 | 30 | ns | VCC = 10 V | 6 | |
| Fall time | tf | 35 | ns | VCC = 5 V | 6 | ||
| Propagation delay time, high-to-low-level output | tPHL | 40 | ns | VCC = 14 V | 6 | ||
| Propagation delay time, high-to-low-level output | tPHL | 24 | 45 | ns | VCC = 10 V | 6 | |
| Propagation delay time, high-to-low-level output | tPHL | 50 | ns | VCC = 5 V | 6 | ||
| Propagation delay time, low-to-high-level output | tPLH | 40 | ns | VCC = 14 V | 6 | ||
| Propagation delay time, low-to-high-level output | tPLH | 24 | 45 | ns | VCC = 10 V | 6 | |
| Propagation delay time, low-to-high-level output | tPLH | 50 | ns | VCC = 5 V | 6 | ||
| Input capacitance | 5 | 10 | pF | 4 | |||
| Input voltage hysteresis | 1.3 | V | 4 | ||||
| Input current, TPS2818/19/28/29 | 0.2 | µA | Input = 0 V or VCC | 4 |
CAD (KiCad official)
- Symbol:
TPS2819QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps2819qdbvrq1-etched.step/tps2819qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2819qdbvrq1.step/tps2819qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
e41abaf671a98ee3, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).