TPS2813PWR

{
  "slug": "tps2813pwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Gate Drivers, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "tps2813pwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps2813pwr.kicad_sym",
    "tps2813pwr.kicad_mod",
    "tps2813pwr.glb",
    "tps2813pwr.step",
    "tps2813pwr.lbr",
    "docs/hero.png",
    "docs/tps2813pwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps2813pwr-hero.glb",
    "tps2813pwr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS2813PWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-8",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps2813.pdf",
    "parts": {
      "symbol": "tps2813pwr.kicad_sym",
      "footprint": "tps2813pwr.kicad_mod",
      "model_3d": "tps2813pwr-hero.glb",
      "model_3d_plain": "tps2813pwr.glb",
      "model_3d_step": "tps2813pwr-etched.step",
      "model_3d_step_plain": "tps2813pwr.step",
      "lbr": "tps2813pwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2677031",
      "digikey": "296-3367-2-ND",
      "mouser": "595-TPS2813PWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T09:19:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-3367-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS2813PWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "REG_IN",
        "type": "power_in",
        "description": "Regulator input, recommended range 8 V to 40 V (absolute maximum −0.3 V to 42 V), and it may be left disconnected or tied to VCC or GND when the regulator is not used."
      },
      {
        "number": "2",
        "name": "1IN",
        "type": "input",
        "description": "Input 1 of driver 1, with recommended input voltage range −0.3 V to VCC."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; all device voltages are referenced to this pin."
      },
      {
        "number": "4",
        "name": "2IN",
        "type": "input",
        "description": "Input 2 of driver 2, with recommended input voltage range −0.3 V to VCC."
      },
      {
        "number": "5",
        "name": "2OUT",
        "type": "output",
        "description": "Output 2 of driver 2, which follows 2IN per the terminal table, with continuous output current ±100 mA (absolute maximum) and 2 A peak output current at VCC = 10 V."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, recommended range 4 V to 14 V (absolute maximum −0.3 V to 15 V)."
      },
      {
        "number": "7",
        "name": "1OUT",
        "type": "output",
        "description": "Output 1 of driver 1, which follows 1IN per the terminal table, with continuous output current ±100 mA (absolute maximum) and 2 A peak output current at VCC = 10 V."
      },
      {
        "number": "8",
        "name": "REG_OUT",
        "type": "power_out",
        "description": "Regulator output, recommended continuous load 0 mA to 20 mA (absolute maximum 25 mA), which can power other circuitry within package dissipation limits."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The terminal table for TPS2811/12/13 prints the output entries as '= 2IN' and '= 1IN' for the TPS281; The regulator (REG_IN/REG_OUT) is present only on TPS2811, TPS2812 and TPS2813. Pin limits are taken; The package addendum (page 28-29) lists TPS2813PWR as TSSOP (PW), 8 pins, tape and reel, with status"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0516,
        "at": "2026-10-11T09:19:40"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps2813.pdf",
        "pages": 41,
        "sha256": "a419cb5ff77841a7",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps2813pwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cf28a51742b2e31065e201d1b313207140cbfb49062efd938788f7a310d02738",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps2813pwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5e84885b15940d2c9def0656ab975bd5ac36983afb9b94030ff6e8656c10ea84",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}