component
TPS2813PWR
Public Made by Adomby adom
Texas Instruments Gate Drivers, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS2813PWR
Texas Instruments · Gate Drivers · TSSOP-8
TPS2813PWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REG_IN | power_in | Regulator input, recommended range 8 V to 40 V (absolute maximum −0.3 V to 42 V), and it may be left disconnected or tied to VCC or GND when the regulator is not used. |
| 2 | 1IN | input | Input 1 of driver 1, with recommended input voltage range −0.3 V to VCC. |
| 3 | GND | power_in | Ground; all device voltages are referenced to this pin. |
| 4 | 2IN | input | Input 2 of driver 2, with recommended input voltage range −0.3 V to VCC. |
| 5 | 2OUT | output | Output 2 of driver 2, which follows 2IN per the terminal table, with continuous output current ±100 mA (absolute maximum) and 2 A peak output current at VCC = 10 V. |
| 6 | VCC | power_in | Supply voltage, recommended range 4 V to 14 V (absolute maximum −0.3 V to 15 V). |
| 7 | 1OUT | output | Output 1 of driver 1, which follows 1IN per the terminal table, with continuous output current ±100 mA (absolute maximum) and 2 A peak output current at VCC = 10 V. |
| 8 | REG_OUT | power_out | Regulator output, recommended continuous load 0 mA to 20 mA (absolute maximum 25 mA), which can power other circuitry within package dissipation limits. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS2813PWR - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tps2813pwr-etched.step/tps2813pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2813pwr.step/tps2813pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
a419cb5ff77841a7, retrieved 2026-10-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).